How to install a simple subway tile kitchen backsplash
Вставка
- Опубліковано 5 вер 2024
- SUBSCRIBE Learn how tile the right way
How to install a simple subway tile kitchen backsplash. Depending on the tile that is to be installed, and where it will be installed, it is sometimes appropriate to use mastic as an adhesive for the tile. When installing tile in a wet area such as a shower stall, mastic is not to be used, instead use a thinset mortar adhesive in areas that will be exposed to water. When using mastic to install subway tiles, ledger boards or bracing of the tile to prevent them from sliding down, will more than likely not be required. Mastic usually will hold a tile in place, unless the tile is very heavy. Mastic is a premixed adhesive that is sold in a bucket and is not thinset, and is not to be used in wet areas. A kitchen backsplash such as the one in this video is an instant where mastic is suitable. Use the correct size trowel to spread your mastic, the mastic bucket will have a description and a guide to help in the selection of the trowel for you tile. Once you have started to install your tile, always check to confirm that the coverage of adhesive on the back of the tile is adequate. Subway tiles more often than not will have automatic spacers on them; this will make it possible to just place a tile on to the next tile without the use of any other spaces. This is not always the case so check your tile before starting the installation. Once the tile is installed allow the mastic to set the appropriate amount of time before grouting.
All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link.
☕ Buy me a coffee ☕
www.buymeacoff...
🙂 This is my Amazon Store 🙂 www.amazon.com...
💲1 PDF Floor installation guidelinessowl.co/s/wWd2d 💲1
Channel Store / @saldiblasi
👍 Patreon / saldiblasi 👍
UA-cam Channel
www.youtube.com...
Facebook
/ 56681633342
Website
www.elitetileco...
Twitter
/ saldiblasi1
Instagram
/ saldiblasi1
National Tile Contractors Association
tile-assn.site...
👇 Some of my favorite Tools 👇
Float amzn.to/2tdEpN2
Rubbing Stone amzn.to/2QrgRfh
Notched Trowel 1/4 x 1/4 x 1/4-inch amzn.to/36bq5mQ
Notched Trowel 1/2 x 1/2 x 1/2-Inch amzn.to/2Q5e90g
Notched Trowel 1/4 x 3/8 x 1/4-Inch amzn.to/39j1caB
Super Dust Collector - WaleTale amzn.to/2MDuVkK
Black Nitrile Gloves - 6 mil amzn.to/2SJQ6FZ
Margin Trowel amzn.to/352MYHx
Mortar Mixer amzn.to/2ZxYqtF
4in Sandpaper for Stone Polishing amzn.to/2ZB2skT
Polishing Rubber Backing Pad amzn.to/2srikdy
Montolit 63P3 24 Inch Tile Cutter amzn.to/2MDoFtl
DEWALT Wet Tile Saw amzn.to/2QqpO8O
Rubi Thinset mixer amzn.to/39VmNWV
Opt into NTCA’s VIP Text Messaging program for training opportunities.
Text “NTCA” to 31996 or Visit widget.smsinfo...
For Industry Professionals only
Thanks, Sal, for this helpful video. I like how you got right down to work without a 7-minute intro on what you're going to do. My son and I will be using your video tomorrow to guide us through a kitchen backsplash project just like this one.
Who else yelled out loud at 5:09? He caught it right away and fixed it, though! Serious professional, man. And thank you for this video - very helpful.
This guy…daaang EXPERT. So humble too
I must say anyone talking lip or saying you did not learn anything in this video, because you could not understand him or you in your opinion honestly believe he is doing something wrong with installation, I very highly suggest you watch all of the rest of his videos, because this gentleman is a master in his craft, has the best videos on UA-cam hands down, no argument end of story, capiche!
Capiche, 😉
But he doesn't even use spacers, so no, he isn't a master Craftsman!
Paul Mcdonald read description before you talk some tiles come with spacers think before you talk so much negatively these days.
Paul McDonald's.
Usualy i Nevers comment on UA-cam comment.
But your comment is very disrespectfull.
You dident lisened to aller the video, because at 7 minutes, he explain why he dont use space.
You should Say sorry to this men
(My english is bad. Not m'y first langage)
He may very well be awesome. But he could also certainly use some subtitles.
No spacers, no laser level, I like it - just getting it done! Excellent!!!
Spacers? 7:07
Did anyone else love the sound of trowel in the fast speed?😄
No
there's other backsplash videos on UA-cam but I keep coming back to this one- this guy is a no nonsense old world craftsman and it's one of the best videos out there.
Great job!
"simple" HAH! That socket cut was a work of art.
It will come off,mastic on the primed drywall omg,not professional job
That cut wasn’t great believe me, it was shocking… the mistake on the bottom would have been visible once the socket front went on.
Use an angle grinder not one of those cheap wet cutters
I have never seen such skill!
You are better than those guys on "Ask this Old House."
It is always a pleasure to see a Master at his craft!
Sal, This is a great video. I just did my kitchen backsplash and it turned out great. I learned how to spread the mastic, cut outlets, use my new wet saw and lay out the tiles in 10 minutes. Thanks!
+RCOU97 you are welcome
Nurse cheac
I've noticed some people mentioned about no spacers. I was a tiler for about 26 year's. many customers do like to see them used. but to be honest a good tiler won't always use them especially with smaller tiles or on a floor. many tiles are shaped at the edge to create a space. I've done much of my tiling just as neat without them. much of the time it's to stop a larger tile from sliding down the wall. great video mate
dave Scopes he showed as well that the tiles had spacers built in.....
Man, I just did my kitchen backsplash myself. I have never tiled anything in my life. And you make it look so easy. I was struggling and sweating for 3 days lmao!! Great job, hopefully Ill be as good as you one day!!
Thanks for watching my video.
I'm telling you this guy is an artist !!!
Thank you for uploading this video. I redid backsplash in kitchen 3 weeks ago and your video answered any question I had about job.
This guy really knows what he's doing!
I’m about to install kitchen backsplash, which I have never done before. Glad you showed the wet saw cause I’ve never used one, but today I have to!
Man, you are scary fast and efficient. Nice job.
Um... he fast forwards the video when he works.
Me, with absolutely no experience, was like "why no spacers?!?" and then at 7:07, Sal saw fit to school me. I appreciate this video!
😊
Lol I did also.
Hi Sal. I just finished a shower with the exact same tile on the floor and 3x6 subway tile on the walls. The client wanted herringbone in a vertical pattern. Very tedious but it turned out well after watching all your tips and videos.
Thanks for watching my video.
I have had that cutter for 30 years, and my father-in-law had it for 20 years before he gave it to me. I have changed the handle on it a couple of times
Sal DiBlasi hi, your work is brilliant. Would you be able to help me please? My kitchen worktop is 1200mm long and its uneven. It raises 2mm at the right end. How do I ensure all my tiling is even? Your help would be much appreciated. Thank you.
Goon wark
@@1suraj start at the highest end, and grind out the bottom and keep starting level consistent with other side. First row make sure is level. You won't notice 2mm less on side, but you'll notice uneven 2mm
Thanks for your amazing videos! I have learned so much from watching! I just finished tiling my own kitchen backsplash with skills I learned from this video! Thanks Sal!
What I do Sal, to make the cutouts around the outlets easier. I buy those pack out boxes. They come in various thicknesses according to the tile you're using. No need to make the screw hole cut out. Square cutouts every time. Especially if you're installing a backsplash that already has outlets and switches installed. Take it for what you will.
If you just have a little patience, i do put the camera down on a tripod. I am just a tile setter not a movie mogul, my expertise with the camera is limited.
Can you use a grinder with diamond blade to cut the tile?
@@erictindall5807 you can and I often do, but a wet saw is a must have for most jobs if you plan to do more than just a backsplash.
Thank you sir
No worries! You’ll get it in time. People got to be critics. Makes them feel all warm inside. Wish I was as handy as you!
I'm installing subway tile in my kitchen. Never tiled before and I'm a little nervous. First I had to remove the old tile and I used plaster of paris to patch the torn wall areas. I didn't tear the wall apart but some of the plaster skim coat pulled off exposing the drywall paper. I also used a paper stapler on the drywall to prevent the paper from expanding outwards after plastering which happened in the beginning. My uncle use to do kitchens and baths and I remember him telling me about the stapling trick and use lots of staples. My plastering job was rough but the wall is now vertically level and strong. Well I'm all prepared to start tiling now...after I finish my coffee.
If people dislike don't watch his videos , personal I liked it!
Just seeing this vid now. As a tile guy, if you are wondering this guy knows what he’s doing. Pay attention.
Wonderful video! Really liked how you explained how measuring, notching, clipping with the tile nippers by showing each step ! The camera angles were great! Felt like I was there looking over your shoulder. We are getting ready to tile my backsplash today - so happy we found your video will be referring back to it a few times as we go! Thank you!
So professional and you made it look so easy!gathering up the courage to do my backsplash myself! Thanks for the informative video!
Glad it was helpful!
I was wondering why no spacers. Man U make it look easy!!
The tiles have little nubs on them which act as spacers.
I thought you were about to make me an offer I couldn't refuse. Brought to you by the God father :) Great video.. you are clearly a seasoned professional
Some times you get lucky, some times you don't.In this case i would have been short of the corner by a small amount, so on the long wall i started making the spaces between the tiles just ever so slightly wider to make up that difference. Not wide enough to be noticed but, enough to do the job. This is sometimes possible sometimes not. If not, start with a half tile where the short wall ends and work back to the corner and make those tiles smaller so that they seem to be folded.
Wow!! Outstanding work! You could've done it wearing a tuxedo and nobody would've known that you worked before the party 😅
Thanks for sharing! You are a bloody artist. Clean, quick and easy. Awesome video.
Rajaذظسصيِ haashir
Is it
Lawrence Jones s
Sal, you take your time and do it right. Wish you were in the Houston area because the guy that did my backsplash did a horrible job. Seems to be a common theme here in Houston.
Excellant work from some one, who has seen a lot of shoddy, craftsmen in her life.
+LOWE sonia I have probably seen more than you, and ripped many of them out.
I've done a few tile jobs and know it ain't easy Great job Sal
Ok....I can watch you put the mastik on all day...the sound is awesome...lol
😁
Thanks for this! I'm working up my confidence to do my own backsplash, and your video helped tremendously.
+Amanda McCall and I's te bestest english spoker in the earth. You tell her, stuck up proofreader, LOL.
+Amanda McCall
Srsly. I'm sure there are some writing/editing blogs they could troll. "Come for the tiling knowledge, leave with a priggish scolding."
WTF.
Great job and my eyes seen what your skills were doing. Your explanations were great and I understood them. Thank you for taking the time to share your talent(s)....peace
You make it look so easy. Everytime I do tiling it looks like a Roman road.
😊👍
Thanks so much, great video. My diy white subway tile back splash came out perfect with all your great pro tips.
Was it hard ?
@@TheSacredlizzy It was pretty easy only took a weekend to complete
Sadly, I didn't have enough tiles to finish my job.
It was just too fewtile.
😜😁
timber_beast 😂
Nice one
Woo-hoo, lol I did this! Thanks to you! I've een wanting to add marble to the inside of a faux fireplace, but, I've been so nervous. Watched your vid, got some confidence going, bought my tools and voila the fireplace is marbled up with Emperador subway tiled. Mastic us still curing fingers crossed! Um yeah when you're offsetting the subway like you did here and have to use spacers you have to cut off a corner so they look like Ts that was annoying but overall it was easy piecy.
looks great and you made it look easy. I am about to do the very same, also using subway tile. Let's see if I can get it done in 10 minutes and 6 seconds.
Kurt M
My cousin, I can't understand you. I had to go to another site to learn. The terrible thing about it was that your site was the first one I got to, which should have been an advantage. Thought you needed to know.
I cut everyway with everytool in my arsenal and it just didn't work.. I went to the hardware store and purchased mosiac back splash and cut the thin pieces I needed that matched. thanks for the reply man keep up the good work and videos coming!
Awesome instruction. I am going to try this in my kitchen.
I love how soothing your voice is :)
☺️
Got skills old boy!
I get it!! Subway tile is in, I installed it myself four months ago. It's the porcelain tile that isn't in. Natural stone is it. Not something that looks like it belongs in a 80s McDonald's restroom.
MrDoug527 right...better to look like a 1970's new york subway or a pink floyd album cover. plus porcelain is more durable.
thanks for getting back to me, and look forward to your next video
I didn’t see your stove hood!?? Anyway you need to start under hood area please! Left and right side same size tile proportions! You need make gap between countertop and tile =1/16.??? I’m professional tile worker just 26 years in USA.
Beautiful work! Wish I had the confidence and equipment to do this.
Thanks for the help!
One word ... respect
This guy is an artisan, he makes it look easy - it's not! Notice how he quickly cut that tile on the wet saw - for me it would break in two every time if that thin.
David P that's bc you're so jacked bro! Lol
You are good with cutting that tile
Nice job
Sal. Thank you. Quick question. Do you get paid more if I watch the ads without skipping? For you I would watch the whole ad. Great channel!
Experience cameing after work thanks
Thank you for sharing.... very very help full
Wow, gorgeous. You make it look so easy! I want to try doing it myself.
Great demonstration!
Thanks for the video; you make it look easy which gives me the confidence I need to do this myself :)
VERY GOOD JOB, ALSO VERY GOOD COMMUNICATION ( 10 )
I'm reading in a few places not to start from bottom, but to start from second row to ensure things are level throughout.
If you are reading on DIY places, then ignore them and follow what a 35 year pluis installer does. Check out some of my other 773 videos.
THANK YOU FOR THIS VIDEO!! Very helpful!! Amazing work!
A true craftsman
Thanks for the great tutorial.
Thank you for sharing your awesome and very how to!!! I greatly appreciate your video.
Good job that, very impressive
Oh yea I'm doing my own backsplash for sure.
Nice work...too bad you don’t live by me...I’d put you to work. Love the chip out for the outlet screw.
😊👍
Can you do my kitchen? LOL. Great job. Thanks for sharing 👍
Thanks Sal 👍🏼
Brilliant. Very helpful and watchable.
good job my friend. very professionally done
Amazing video! Very concise no b.s. so many tips good job!
Thanks for the video
No problem!
This will not always work, but some how you have to give the visual effect of folding the corners to make it look right.
Great job, like it, I have learned a lot, simple and look good!
Great video!! What is the sanding tool you use around 2:50 of your video to knock down the rough edge of the tile?
beyond excellent sal.
Fast, nice, i watched abit on you tube and i notice all backslash are been done with no spacers
Wow, that circular saw without any guard. Dangerously done. Great way to lose a finger or more. That's usually when the experienced start to make major mistakes.
You obviously have never used, or even seen a wet saw, otherwise you would know that is not even close to reality. It is not a circular saw, which is very dangerous.
@@SalDiBlasi You are correct. I didn't know it was a wet saw. Still seems dangerous.
Thanks, Sal! Great job and video.
Fun and informative to watch, for sure. Question, what "sanded the edge" of the cut tile? (the white block) The fresh cut edges look way better when they are rounded over and loved when Sal did that.
Sal, doing a backsplash with 3 x 6 travertine tile. What size notch trowel should I use?
Also, doing a mosaic tile insert over my cooktop. What size notched trowel should I use for this?
I enjoy your informative videos and your expertise.
Thank You,
Great job, Sal
Thank you kindly
Automatic spacer tiles, never seen those before, wish mine had that!
Used to be very common, hard to find these days.
Thank you. this is very helpful.
These tiles will pop out with the time you need to put some pressure on tiles or move then side to side that way they will get appropriate bonding
True master....wow
brilliant...going to have a go at doing mine now ...thanks
awesome tutorial Sal. Thank you!
So helpful! Thanks!
Great video, very helpful. Thanks Sal
No spacers between the countertop, masacre
That would be ugly
Great job
😊👍
Great job my fellow Italiano
Grazie.