I have 2013 Kia Soul. The exterior front right turn signal light does not light up. The rear right turn signal flashes quickly as well as on the dash. The left turn signal front/rear flash normally. With the Hazards activated all the lights work including the exterior front right signal light. What do I need to replace or do? Yes, light bulb replaced.
You have a bunch of burnt out lights - some have a double filaments - put the left lights in the right side and you will prove it - it just appears to be confusing - its just a few burnt out lights - let me know how you make out
carquestions I don't have any burnt out lights. All the lights light up except the front right signal light. But it does light up when the Hazards are on. I also switched the right and left bulb sockets from the turn signals. The right side still does not light up.
i have a 2013 kia sorento i came out this morning and the car wont start and the green hazard turn signal lights are flashing in the dashboard i put a battery charger on the battery and am waiting but in the meantime i could not get the flashers to turn off they are blinking rapidly and together two green arrrows
my issue is the front blinker on one side flashes quickly like the video shows. The rear bulb was replaced and it still does it. The opposite side works and functions just fine.
@@carquestions yes. When I was a lineman for a power company in Florida. We did lots and lots of under ground wire. One day we decided to fill in the ditch before we tested everything, we learned real quick never fill in the ditch till the very end.
I HAVE A 2011 CHEVY PU SILVARADO THE BLINKERS BLINKS FAST ON THE REAR ADN NO FLASHING ON THE FRONT..PASSENGER SIDE...REPLACED BULBS IN THE FRONT AND STILL THE SAME RE-PULLED BULBS AND ADDED ELECTRICAL GREASE AND CLEAN SOCKET..DID THE SAME ON THE REAR....STILL THE SAME..FUSES ARE GOOD...WHAT ELSE TO LOOK FOR!! THANKS JOHN
Get a DVM or test light and check the sockets for power and ground - could be a bad ground - also when switching out lights, use the ones from the other side of the car - you know they work - good luck John
I need help guys I have the Audi TT 2007 model ,the indication flasher going crazy fast on the dashboard, on the left side ,but my indicator bulbs are fine, they flash normal outside,what can the prob be
You say that's it's not obvious if the light's burnt out by looking at it from the outside. Wouldn't it not turn on if it's burnt out? I think I have this problem on my Hyundai Accent but all the lights seem to still turn on.
I got tired of switching and replacing bulbs, checking sockets, looking for the relay as opposed to the blinker flasher unit. Show me how to find it with an ohmmeter or some device. Now they both blink fast!!!
These are all very basic issues relating to the turn lights blinking rapidly. And almost everyone is aware of the root cause. Can anyone out there tell me how to troubleshoot turn signals nit functioning at all. Checked the fuses and they are good. Replaced the flasher relay which did not fix the issue. What else can go wrong? Please share your expertise. I have a 2013 Ford Figo 1.4 Diesel Titanium.
Start at the end and work backwards - so start at the light socket - do you have power? (test with a voltmeter) if yes then its the bulb or contacts - if no trace back to the next connection point - do you have power there? if yes then the problem is between there and the light socket if no go back to the next connection point and so on - eventually you will get back to the fuse, switch and main power source - its not magic - just tedious but you will find the problem - don't forget to check for rusty grounds as well as power
Yes caging the globe might be the issue. ...then again if the fast flashing continues with a confirmed good globe then maybe it's a Relay issue??? You forgot to mention that..
carquestions can it be that one of the contacts of that plastic that supports the bulb, has a hole in one of the contacts? Cause i changed the bulbs and it does the same
On LED bulbs it don't matter. Standard bulbs will still last a while if not the same amount. It's the halogen lights which run really hot that will fail or even explosde if there's any presence of oil.
One mistake, don't touch the glass on the bulb, I know you know better then that, or you should, just saying people, unless you like changing bulbs of course.
You da man! I was all set to tear of the dash and create a mess. Thanks!
No problem
Thanks man, my bulb wasn't out completely so I was about to buy a switch or flasher relay. $5 fix instead. 👍
Anytime - Cheers!
I have 2013 Kia Soul. The exterior front right turn signal light does not light up. The rear right turn signal flashes quickly as well as on the dash. The left turn signal front/rear flash normally. With the Hazards activated all the lights work including the exterior front right signal light. What do I need to replace or do? Yes, light bulb replaced.
You have a bunch of burnt out lights - some have a double filaments - put the left lights in the right side and you will prove it - it just appears to be confusing - its just a few burnt out lights - let me know how you make out
carquestions I don't have any burnt out lights. All the lights light up except the front right signal light. But it does light up when the Hazards are on. I also switched the right and left bulb sockets from the turn signals. The right side still does not light up.
ese.hombre, it is quite likely the problem is a bad relay.
Thank you, I'm fixing my own simple car issues
Excellent - you"ll get a sense of satisfaction and save a lot of money in time - keep it up
i have a 2013 kia sorento i came out this morning and the car wont start and the green hazard turn signal lights are flashing in the dashboard i put a battery charger on the battery and am waiting but in the meantime i could not get the flashers to turn off they are blinking rapidly and together two green arrrows
Disconnect the battery for a few minutes - also check all lights to see if burned out
I need help I already change the turn signal bulb and It still keeps flashing fast
change the front and the back then let me know how it works out
carquestions wait i have the same prpblem the back turn sognal is fine but the frpnt left still kees flashing... Im guessing it could be a bad relay
my issue is the front blinker on one side flashes quickly like the video shows. The rear bulb was replaced and it still does it. The opposite side works and functions just fine.
switch bulbs from left side of car to right and see if that makes a difference -
If all bulbs are working make sure you are using the right wat bulb for your car
Sounds like an earthing issue on either front or rear earth points for lights.
Thanks alot sir ive seen alot of videoa but your us just simple and works i subcribe to your channel god bless you
Thanks, but how did you know it was the front turn signal and not the rear turn signal bulb?
get out and look at the one not flashing at all
Always check the blinker before you install it back in the car.
Good advice
@@carquestions yes. When I was a lineman for a power company in Florida. We did lots and lots of under ground wire. One day we decided to fill in the ditch before we tested everything, we learned real quick never fill in the ditch till the very end.
I HAVE A 2011 CHEVY PU SILVARADO THE BLINKERS BLINKS FAST ON THE REAR ADN NO FLASHING ON THE FRONT..PASSENGER SIDE...REPLACED BULBS IN THE FRONT AND STILL THE SAME RE-PULLED BULBS AND ADDED ELECTRICAL GREASE AND CLEAN SOCKET..DID THE SAME ON THE REAR....STILL THE SAME..FUSES ARE GOOD...WHAT ELSE TO LOOK FOR!!
THANKS JOHN
Get a DVM or test light and check the sockets for power and ground - could be a bad ground - also when switching out lights, use the ones from the other side of the car - you know they work - good luck John
How do you know which turning light bulb needs to be replaced ? on the dash board it says right or left but it does not say front or back. Thanks
You have to get out of the car to look at it functioning - anything unusual replace it
Hi . Thanks for taking time to respond . I successfully did it !. Thanks to your video. I got a new bulb from auto zone
I need help guys
I have the Audi TT 2007 model ,the indication flasher going crazy fast on the dashboard, on the left side ,but my indicator bulbs are fine, they flash normal outside,what can the prob be
A spent fuse could be the culprit.
hI HV A 1994 FORD F350 MONTAGO MOTOR HOME CANT FIND FLASHER OR RELAY. WOULD APP. ANY HELP . GOT DASH TORN APART STIL NO LUCK.
Turn on the flasher and feel everything under the dash - something has to be clicking
Great explanation. Thanks!
Anytime Enry
You say that's it's not obvious if the light's burnt out by looking at it from the outside. Wouldn't it not turn on if it's burnt out? I think I have this problem on my Hyundai Accent but all the lights seem to still turn on.
Sometimes a bad light can still "turn on" but go out seconds later when your not looking because of a bad filament and movement like a bump
I had to replace switch on steering wheel coluom repeated signal failures....don't know what to do anymore
Is it blowing fuses? - you have a serious wiring issue - was it in an front end accident at anytime?
carquestions its on the back left light. I don't know if it had any accidents. Yes serious short! That much I already figured out!!
Mechanic can't figure it out
Switch in steering column has failed again
I got tired of switching and replacing bulbs, checking sockets, looking for the relay as opposed to the blinker flasher unit. Show me how to find it with an ohmmeter or some device. Now they both blink fast!!!
far out man, wished more cars had that setup for replacing the front indicators. Some are right sods to get to.
I agree with that
The signal light on the right usually burns out first.
Scott Hayes 🤣my right signal burnt out
You usually make more right turns than left.
These are all very basic issues relating to the turn lights blinking rapidly. And almost everyone is aware of the root cause. Can anyone out there tell me how to troubleshoot turn signals nit functioning at all. Checked the fuses and they are good. Replaced the flasher relay which did not fix the issue. What else can go wrong? Please share your expertise. I have a 2013 Ford Figo 1.4 Diesel Titanium.
Start at the end and work backwards - so start at the light socket - do you have power? (test with a voltmeter) if yes then its the bulb or contacts - if no trace back to the next connection point - do you have power there? if yes then the problem is between there and the light socket if no go back to the next connection point and so on - eventually you will get back to the fuse, switch and main power source - its not magic - just tedious but you will find the problem - don't forget to check for rusty grounds as well as power
Yes caging the globe might be the issue. ...then again if the fast flashing continues with a confirmed good globe then maybe it's a Relay issue??? You forgot to mention that..
But I changed my bulb and it still flashes fast and no signal.
You changed the wrong bulb - do the other one same side of car
carquestions can it be that one of the contacts of that plastic that supports the bulb, has a hole in one of the contacts? Cause i changed the bulbs and it does the same
Could be a bad or loose wire.
So what was the problem because I have the same issue
dielectric grease also....
No gloves?
Bro I know this video is about 4 years old but never touch bulbs with your bare hands the oils in our hands make the bulbs wear out prematurely
On LED bulbs it don't matter. Standard bulbs will still last a while if not the same amount. It's the halogen lights which run really hot that will fail or even explosde if there's any presence of oil.
@@69ztang I meant to say specific halogen bulbs
33 people's screw fell into the car
Thanks
Anytime
My left turn signal blinks fast and both left front and rear bulbs are on but dnt blink??
Replace the bulbs anyway and try again
One mistake, don't touch the glass on the bulb, I know you know better then that, or you should, just saying people, unless you like changing bulbs of course.
Graham- That's for halogen type headlight bulbs - it's impossible of course to change a turn signal bulb without touching the glass part
zoom zoom
Mine exploded lol
Thanks