TURN SIGNAL Not Working But BULB is GOOD - Blinker Diagnosis & FIX - Honda Odyssey
Вставка
- Опубліковано 10 лют 2025
- When the passenger side turn signal started blinking super fast, I figured it was a blown bulb and an easy fix...Just replace the bulb, right? Not this time! Join me as we try to diagnose why the passenger side front turn signal won't light up even though the bulb is perfectly fine. It took me a few hours to sort it all out, but I have condensed it down to 12 minutes for you! Hope this helps, and I thank you for watching. Please feel free to comment, like, dislike, or whatever. Buck's Small Engine DIY, Putting the "Do" into "Do-It-Yourself"
Want an Official Buck's Small Engine DIY Sticker??? Send me an email with your name and mailing address at buckssmallenginediy@gmail.com, and I'll send you a sticker absolutely free!
I had the exact same problem with my 2009 Odyssey. My mechanic did his diagnosis and at first thought it was a bad socket, but replacing it didn't help. He eventually thought there was an issue with the fuse box multiplexer that would have to be programmed by the dealership. I wasn"t convinced and showed him your video and asked him to checkout the grounding point. A couple of the wires broke when removing the screw, but he soldered the broken wires and heat wrapped them and used some dielectric grease on the contacts and PRESTO, my front right turn signal is working again. Thanks again for the great video!
Your video saved me time troubleshooting the problem. In my case, I just sprayes the PB Blaster and WD-40 on that wire connector attached to the chassis, and, to my surprise , the right turn signal started to flash once again. It's still working as it should for about a few months now. Thank you for sharing.
Thanks!
Very kind of you, Zeke. I really appreciate it.
If this works... I'm definitely giving him a THANK$$$!
@@Buckwsrit worked! $5 coming your way!
@@alexalb5256 Great job doing it yourself! And thank you so much for your generosity!
@@Buckwsr $0 repair, but in 25°f cold at night... it cost me my whole life! 🥶
This video really helped me diagnose my ford 2011 Escape right turn signal issue. The issue was a dirty connector between my aftermarket trailer wiring harness and original connector. I was able to spray some WD40 on those connections and oh what a relief, it worked. I did use the diagnostic techniques in this video to test the connections without and then with the after market trailer wiring connector and pinpointed the problem once I removed the aftermarket CURT trailer wiring harness. Just be patient and you'll succeed. Thank you and God bless.
Great video! On some GM cars I've owned; I've found the bulb receptacle "loosens" and I have successfully squeezes the metal clips in them tighter and that solves the "burned out" or "non-working" phenomenon!!
Awesome. That darn thing was driving me crazy. You helped a not so rich dad save some money and keep his family safe. Well done sir
Great job getting it done yourself! Thank you so much!
Man , THANK YOU VERY MUCH SIR, I really appreciate you taking the time to show this ...
Thank you so much!
Great diagnosis and use of your meters. Hard to pull things apart and track it down but you did great!
Very helpful. Thank you.
BTW if anyone is wondering, this ground connection is located in the front close to the radiator. And in my case, it was not the turn signal, but the high beam right headlight that did not work.
Much thanks man. I'm not sure if this helped me with my issue, but I learned something which is awesome.
Sir THANK YOU!!!!!!! I found your video extremely helpful! I had blinkers working only when lights were off. When I turned my lights on no blinkers at all. I found that same bolt. It was finger touch loose!! All i did was throw a socket on and tighten mine up and BOOM! Blinkers!!!! You were a big help sorry it took you all day because only took me about 10 minutes.. LOL I owe you a a few beers..
Great! Will try this in my car which acts very weird with regards to my headlights, fog light and signal light. One minute it works then the next minute it doesnt. Losing "earth" is a very logical diagnosis which I didnt think of. Appreciate you doing this and helping us novice DIYers :)
Thanks for making this video and going through the diagnosis. Just had the same issue on our 08 Odyssey and ordered a new relay, which did not solve the problem before finally finding your video. Almost considered getting the whole front wiring harness, but that would have been an expensive and time consuming solution. Thanks, again, for sharing and saving a lot of time and headaches!
Thanks, Tom, and good luck!
THANK YOU! My 2006 Odyssey right blinker has suffered the same fate. I suspect I have a couple bad grounds on that side as the indicator light is out as well. I have also confirmed the bulbs are good but still no illumination. Now I know where to find that illusive ground connection. Thanks for taking the time to film, edit & post.
Thanks, David. Hope you get it resolved with no problems.
Love your work, I have a Similar issue, but now I know where to start looking! This 12 minutes may have literally saved me hours… much appreciated!
Good luck, and thanks for the kind words!
Thank you so much. I have the exact same problem on a 2015 odyssey. You saved me a ton of time and frustration trying to figure it out.
Just tested the bulb and it was good, thanks for the extra info!
One of the better video's on UA-cam. It was also good to note that you need to use a battery negative rather than a chassis ground when chasing continuity and voltages. Great job!
Thank you for the kind words, and for watching the video!
I have the same problem with a rear turn signal on my 2006 Tacoma and on my 2011 Camry. I couldn’t figure it out, until now. You’re a genius! Thanks so much. Awesome! 👍🏻👍🏻
Thank you I have the same problem on my 06 Ford fusion. I was just about to break down and take it to a garage. Thankfully I found you 👍
Okay, great. Hope you got it all sorted out!
Thank you, thank youuuu!!!. I have this problem right now, and you have saved me a headache and so much money. I thought I had to bring it to the dealer, knowing they would charge me an arm and leg, knowing I could just do it myself 😊.
Good luck with the repair job, and thanks for watching the video!
Thank you my friend. I have the same exact van and the same issue. Couldn't figure it out. I really appreciate you making this video.
Yes, sir! I hope you get yours fixed successfully! Thank you.
Time for you to get a power probe
Thanks buck! You saved me hours on this project, which I didn't have hours to spare. Take care and post more Honda videos!
Thanks so much.
I’m super grateful that you made this video. I had the exact problem. Followed your solution and it was the exact same thing. Good bulb bad ground. Thank you!
Thanks for the note. Made my day! Good job fixing it yourself!
I don’t have a Honda but 2013 Kia Sorento- thought putting in new bulb would solve my rapid blink problem- didn’t work! Thought I would have to take it to electrical mechanic shop but searched and found your video. Looked for ground wire on body but it was shared with horn that works. My directional bulb goes into a socket with contacts that rotate into place. Looking at socket the ground contact looked a little bent so adjusted it and rotated back into headlight housing and it works. Thanks for setting me on the right path even if it wasn’t the exact same fix!
That's great, Jack! Good job getting it done yourself!
Thanks Buck, I have the same problem with a 2002 Toyota Camry. I haven't found the ground wire yet but I wanted to leave a thank you before I loose this post.
Thank you, and good luck on the repair!
Great video. You have saved many peoples here and myself a lot of money. The dealer will charge 200 dollars for this work.
Thank you and now I know I’m not going crazy.. I’ve changed the bulb three times this year on the same light signal passenger side and I literally just bought a new light period. I put it in and the very next day on a brand spanking new light it did it too. So of course something else is causing this problem. So thx so much for this video and it looks like it’s going to be a shop fix because I certainly don’t know that much about cars so I definitely wouldn’t try to take any wires loose to diagnose.. But at least I can stop taking my bumper off to get to this lamp just to replace a bulb. 2005 SRX 👍🏻😊♥️
Nope, you're not crazy. Thanks for watching the video and good luck with the repair.
Thank you! You saved me a headache of needless searching and troubleshooting.
That's me! Saving the world from unwanted headaches!
Awesome video! Tnx. I’ll try that as I have a similar issue. Works ok on hazard flash but not on one side. Already replaced bulbs and flasher relay and was stumped until I found this vid
Thank you for this video this is exactly the issue I was having with my 07 Chevy, now I at least know what to look out for tomorrow.
Kudos on on finding your fix. I have the same problem with my truck. I hope I find my fix to be as "easy."
Good luck, and thanks for watching the video!
Sorry it took your whole day. I’m definitely thankful. Needed to do this so I can pass inspection.
Great. Hope you get it resolved easily. NJ inspection used to check everything....blinkers, lights, brakes, horn, everything. Now they look at your paperwork, plug in a scan tool to make sure the check engine light is not illuminated, verify you've got a catalytic converter....and that's about it.
awesome video, it helped me get and idea why my blinkers (front and rear) are not working at all, sometimes they do and sometimes they don’t.. i’ll try to give it a try thanks again 🙏
I am having this exact same issue. Thank you! You gave me something to investigate.
You are heaven sent Sir. Best video ever!!!!! You have saved a lot of money, thank you so much.
Thank you so much!
Excellent vid, I have the same problem with my 05 Odyssey, thanks for sharing it. I will be looking at those ground wires, tried the new bulb on the LT side signal worked fine so it's not the RT side signal bulb. My fender liner is missing on the RT side, I'm almost certain the negative ground will be corroded 👍🏽
Yep, common problem, apparently.
I am having the same problem with my Hyundai Veloster, teh left blinker keeps fast blinking, the bulb is good. I will do this, thank you for sharing your knowledge.
This is exactly the same thing that happened to my odyssey. I hope it's the same issue!!!! Thank you!!!
Thank you, I’ve been having the same problem, time for me to find a solution too!
I’m glad I found this video my friend has the same issue. And when u said about turn signal blinking at different speed inside the car I just realized that I did heard the difference. But did not paid attention to it. Now that u said if I will be checking fuses. And also the turn signal in his just stays on so it’s def not bulb issue. But now if it’s not fuses or relays. Then I hope the body shop that fixed fender and bumper and replaced the headlight didn’t accidentally messed with wiring.
Well done. Wasn't my problem but I still enjoyed your video. Thanks.
Great video! I’m DEFINITELY going to try your method!
thanks for your video , i thought it was a bad ground since it seams the headlights blink funny when i put the bulb in and instead of going under the car i might try to splice the ground at the turn signal and just ground it somewhere above and thanks again for your video
Thank you for the great film. It was especially useful for me, though I accidentally disconnected the grounding, and it was in a totally different place.
I found it!! And what it was, I removed the headliner board for re[placing the upholstery on it, and disconnected the wire to the ceiling lens. The shop manual (I fortunately have for that car 2001 Saturn SL2) advised to attach those wires w/scotch tape, so I disconnected it fm/the plug by the rear window. The plug was sitting on a thin plate, which I assumed was there for keeping the plug in correct place. After I did some research and watching this film I've learned that grounding could cause Turning Signals go off. The Manual showed 2 grounding wires on the rear close to that plug. There was a clip on the plug, metal one. I disconnected the grounding there, so even w/plug in the T S-ls didn't work of course. It might be helpful for someone else. Pls check the grounding as well if you have a problem w/T Signals and the fuse is fine. I was about to replace the Steering Column Switch, and actually ordered one already (so will have a spare now, not bad thing though).
Thank you again for pointing out on Grounding connections.
Update 1: Now everything is working w/that clip off or on, so it was not the ground connection, just a mounting clip. I'm completely lost and don't know what was the problem before. Maybe still the Steering Column Switch. The car was sitting for a long time, probably smth got corroded inside of that Switch and after several shifts back and force it is gone.
Thank you so much, and good luck with your car!
Love you bro same problem i face in my nissan sunny i worried but when i saw your video i fix it
Good job - helpful and clear description of diagnosis and fix.
Thank you. This is exactly what my car is doing. Now I can try to fix it.
Just fixed my suzuki Dzire you really helped me 🙏
Great job. Honda needs to do something about those ground connectors that are open to the outside weather elements. Especially with the lights which could be grounded closer to the light reflectors and more out of the corrosive salt and water elements.
Good insight. Thanks for the note.
Cadillac does too. Because my 2005 SRX has the exact same problem looks like.. All I know is I’m tired of changing bulbs.. It’s a challenge to get to the bulb period on these cars. This is the blinker and fog lights lower that’s quite a bit of work just to change a bulb. The head light lamp is a bit easier though.. But that blinker is WORK!! 😂🤣
Thanks for posting this. I snapped off a marker light while changing headlights and I think there is still debris from the busted lamp in the socket. I am still blinking fast.
Thanks for video I had the same problem and I fixed it exactly as ur video shows
Hey there nice video!! I have a question today I have change my old turn light bulb and reason is because it was old and orange color on bulb fall from it so it was like regular light. I change it to new orange bulb, but here problems starts... Bulb is not working and, after changing bulb on that right side, all turn lights on right side are blinking very fast except on the front right light where I change bulb. What do you think could be the problem?? I also tried to change another bulb same problem
Really appreciate you doing this video. Thanks for the education.
Have the exact issue on my 2006 dodge caravan. Now I have to figure out where the wire is bolted to the frame rail. Thanks for the logical plan.
Great 👍
Please what if turn signal one side front and back is not working but the bulbs are good
Great video, my indicator light won’t turn on and the turn signal blinks fast . There’s 2 different filaments . It’s not the bulb, I replaced the bulb and same problem. Checked the bulb continuity for double assurance. Are you not afraid that the other grounds are going to fail??
Exactly the answer im seeking. Thank you for the video man
Great video. Thanks for sharing. I found your video while searching a problem with the turn signal on my 2006 Honda Pilot. When I use the left turn signal to make a short left turn the signal does not always cancel when completing the turn. The left signal does cancel on a longer turn of the wheel. The right signal cancels after both a shallow and deep turn. I replaced the flasher switch arm but it made no difference. Would appreciate any suggestions. Best regards. 😊
I'm pretty sure the mechanism that turns off the signal after a turn is located inside the steering column, and would require removing the steering wheel to access it. Possibly more trouble than it's worth.
Great Video! Thank you so much for posting it as it solved my same problem...I Love my 2008 Honda Odyssey touring model.
Thanks so much, Harvey!
Wish I could do multiple likes for this video. 👍
Thanks man, this is so in depth
Hi there, thank you so much for taking the time and effort to figure this out, same exact problem on my 2007 odyssey, will do this procedure and hope it fix my situation. Happy 4th of July. God bless America 🇺🇸
Ok, Elmer, good luck with the repair. Just the way you wanted to spend your holiday, right? Fixing your car!!
anxious now to see if this is the root cause of my same apparent issue! fingers crossed!
Good luck, David! Thanks for watching the video.
Thank you for this video! I have pretty similar symptoms in my 2005 Odyssey. I just replaced the right turn signal bulb, but it's not working. I guess it's time to check the ground connection...
Thank you. Good luck getting yours fixed!
@@Buckwsr Thank you! Yesterday I did a few tests, but I'm not sure if I done it correctly. First, the bulb is working. And my socket definitely gets + voltage because when bulb is connected to the positive socket pin and to the battery negative, it works perfectly. I located the ground where you showed it, but it seemed the continuity test was fine there. I need to repeat it one more time today. Also I removed the bolt, cleaned it with metal brush and slightly played with that ground connection. It felt pretty solid. So I'll try to check it one more time later today. Worst case I'll have to run a wire directly from the negative battery terminal to that black wire going into turn signal connector.
@@yolo-cars Test to see if you have ground connection at the turn signal bulb socket. You didn't mention whether or not you did that. Supplying ground to that socket from another location is an okay solution, I think, as a last resort. Good luck.
@@Buckwsr I'll do a test later today. At least I remember I tried to hook the bulb to the positive battery terminal on one side and to the ground connection in the socket on another side, but there was no light. I assume there was no ground. I'll try to perform the continuity test of the ground later today. I want to hook negative battery terminal with that ground point on the bottom right of the car. Also I'll try to perform continuity test of that black wire itself.
@@yolo-cars Sounds like you have a good understanding of how it works. I'm sure you will have it fixed very soon.
Thanks. Had the same issue and your video helped me quickly zero in where to fix the wire.
Awesome, Jerry!
Thank you so so much for this ! My wife’s has same issue.
Thanks! My daughter has the same problem on her 2008 and this helped me find the ground location.
Awesome. Hope you got the job done!
Thanks for sharing this. I have a similar problem on a 2000 Tundra but the left turn signal only flashes faster when I step on the brake. The truck had a camper shell with turn signals and brake lights and the wiring was installed by the installation team at the place I purchased it from. If corrosion (or a wire with limited continuity) caused your problem, maybe the wires spliced into the brake and turn signal lighting are causing my issue.
Yes, aftermarket add-ons are often the culprit in strange electrical issues, unfortunately.
Same problem on my 2014 Cadillac SRX. I'm sure the bulb is good. I'm going to check the bulb socket ground. Thanks for posting.
Good luck, Ken!
@@Buckwsr This was an intermittent problem that the dealer service people couldn't diagnose because it was working when I had the car in for other service. The very next day it stopped working again (intermittently). I couldn't detect a ground through the ground side of the bulb socket. I then discovered that the bulb socket was a two piece arrangement that I was able to disconnect. It turns out that the bulb socket has two pins that plug into a wire socket. I put a small wire into the ground pin hole and reconnected the parts. Success! So far, so good after almost two days. Thanks again!
Thanks dear. Very informative
Good job. Nice presentation!
Wow this is the same issue I'm having with my honda accord. I'm going to try this
great job lust understanding how electrical works is key
Very nice video and explanation!
I have the same exact issue on my 2008 Nissan Altima
The only difference is that I have this problem for both front turn signals
My question is, do I have to look on the other side for that other ground wire or are they all in the same place like you showed on the video?
Thanks in advance
I don't know how your vehicle is set up, or if both front turn signals share the same ground. A wiring diagram might be helpful, or an online search to see if other Altima owners have any experience with that same problem. Good luck.
Question what exactly did you do to ground the wire?
Super helpful. Thank you.
i have the same problem they wont turn on but blink are thank you for the video👍
Great Video, I have the same problem with my impala.
Very nice video. Looking for a fix for 1999 toyota camry front blinker not working.. thank for your help
You da man😊 this freaking helped me to fix sucking on problem
Great vid Thks. Same intermittent issue. I will try to track it down!
Great!
Thanks!
its great video . let me tell you this , frankly it was not easy to find your video on youtube hopefully you need to change video title so more people can get great help then
I appreciate that feedback. Please let me know what kind of search terms you were using. What sort of title would have made it easier for you to find this video? Thank you so much in advance!
@@Buckwsr "Honda odyssey turn signal not working but bulb is good"
I m sure lots of owner of Honda odyssey 2008 will be struggling with same issue
@@jbae7683 Thank you
Good and clear explanation.
well done dude. 👍 you found that gremlin 🐸
Thank you.
I see you are over 200,000 miles. My question is how often do you drain and fill the transmission and what fluid do you use. My Odyssey is a 2007 with 200,174 miles. Engine is solid and I would like to keep it reliable as long as possible. Thanks!
I have 259k miles now. Here's a video I did on the transmission maintenance that should help you. Good luck. ua-cam.com/video/7uN4wssH64I/v-deo.html
@@Buckwsr Thanks. Just viewed it. Very informative.
My 16’ chevy Cruze had some electrical problems some of the fuses under the hood don’t have power to them.. i tested them. Some light up when contacted and some don’t. I replaced all the mini fuses and still not getting power when checked.. 2 of the turn signals, brake light, horn, power outlets don’t work and engine worn turn on. No crank at all. Also windows won’t roll down from front driver side and passenger, but the rear windows work only on their doors. Won’t work from the master control. But dash lights up and front lights work. Any suggestive leads to take?
My honest gut reaction to your note is that you are in way over your head and need to get some professional help to sort out this list of problems with your vehicle. Get it towed to a reputable shop. Chances are that there is one significant issue, which, once identified and resolved, will fix most if not all of these multiple electrical problems. Good luck.
@@Buckwsr okay thank you! Will update when fixed.
Glad I found your video, similar problem but mine is the RT rear turn signal on a 2005 Camry. Ok, now I have to find that chassis ground. Hopefully it's not hidden away to bad. Thanks again. BTW, swapping the bulbs from the working side / bad side is a good way to check the bulb without having to run out and buy a bulb that you may not need. :)
Thank you. Huge help. Excellent video
Great job, I'm still trying to figure out the issue with my flash signals on my 08 vue.
Great Video, Thanks !!!
Nice troubleshooting Buck
Thank you.
Hello good afternoon I have a problem with the turn signals it does not mark the signal I cannot find the Flasher of the turn signals I will try your video my car is Honda Acoord 2008 4 cylinders automatic
Thank you. Replaced my bulb and have no damn idea why it wasn't working. Looking into this next
07honda Odyssey. Seems to be a common issue with these
Good video because is different way. I use a power pro now. but i like this way too.
Thanks buddy. Same problem
Awesome. GREAT job & video! Thank you for being so thorough!! Gives me courage to do this myself. Thanks.
Thank you for posting this video. I have the exact same problem on my 2009 Ody. I have an oil change coming up soon will tackle it then. Wish I had seen this before I bought a new relay that didn’t solve the problem and had a feeling it wouldn’t be that easy. Lol
Good luck on the repair. Thanks for watching the video and commenting.
@@Buckwsr thank you. Yw.
Thank you. Great video.
Hopefully this is my issue. When I go to use the turn signal, it blinks fast inside but the bulb isn’t blinking! The bulb is lit up though. Any thoughts?