For the record I've only subscribed to 5 videos. I loved the simplicity of your video. You got to the point and didn't bore us with a lot of words. I have a wire paito set with a lot of rust on it and have been looking for something to help me remove it. Job will done. Goodluck with your future videos! 💜😊👍
Thank you so much for this nice, short, and concise video! I’m preparing to repair a severely damaged rocker panel on my 2005 Ford F-150. I’m puzzled by the extent of the damage to the driver’s side rocker panel. This is not a “Northern Truck”. The rest of the truck looks quite amazing for its age. Ford and Chevy vehicles weren’t known for rust resistant rocker panels. I tested the Rust Resolver a bit last night and was astounded by the results. Yes, it takes time, and I understand that’s to be expected with rust that’s at a level three or higher. Can’t wait to see what it will do in getting down to the bare metal!
Honestly, I think 4/5 is being a bit harsh as I would generally expect a very strong chemical smell from reacting an H3+ acid like phosphoric acid. Im gonna buy it for a tub for an outdoor steel raised garden bed I want to restore so I'll be able to give an actual score instead of just internet jabbing. Sounds like it's a darn good product.
It has phosphoric acid which actually etches galvanized metal. Unless you're painting galvanized steel, phosphoric acid will partially remove galvanizing on metal.
This sounds like an infomercial. Do you have a business relationship with the manufacturer? I.e., sponsorship or marketing deal? Did you get the product for free in return for this “review”?
For it to rust it has to have carbon/iron in it which alluminum doesnt. Alluminum can oxidize but cant rust the product im sure means surface rust from something touching or dripping onto alluminum..@abdullahal-shimri3091
If you want to try something really works good on removing rust try purple power cleaner spray purple power cleaner on to it last set for 45 minutes go and clean it off the rust is gone Rust-Oleum I do not like that much specially the Rust-Oleum paint it's supposed to help out not have your body rust but it makes it rough even more I know
You mean just like every other commercial rust remover? They're all pretty much a phosphoric acid solution with alcohol and a surfactant. Anything else is just fluff, it's the phosphoric acid that is that active ingredient for converting iron oxide (rust) to stable iron phosphate. Not sure why you think this stuff is bad for having the proper active ingredient for its labeled purpose.
For the record I've only subscribed to 5 videos. I loved the simplicity of your video. You got to the point and didn't bore us with a lot of words. I have a wire paito set with a lot of rust on it and have been looking for something to help me remove it. Job will done. Goodluck with your future videos! 💜😊👍
I can’t tell you how much a thoughtful comment like this means. Thank you for the support. 892 and counting!
Thank you for sharing, have a blessed day!
Thank you 🙏
Rehabbing a loom reed. Just needed tips on how this stuff works. Believe I'll do this outside. Thanks!
Thank you for the support.
Thank you so much for this nice, short, and concise video! I’m preparing to repair a severely damaged rocker panel on my 2005 Ford F-150. I’m puzzled by the extent of the damage to the driver’s side rocker panel. This is not a “Northern Truck”. The rest of the truck looks quite amazing for its age. Ford and Chevy vehicles weren’t known for rust resistant rocker panels. I tested the Rust Resolver a bit last night and was astounded by the results. Yes, it takes time, and I understand that’s to be expected with rust that’s at a level three or higher. Can’t wait to see what it will do in getting down to the bare metal!
Heck ya. Thank you for the kind words. I was also pretty taken back bye the success, That’s kind of why I wanted to make a video.
Great video. Thanks for sharing. I’ve got an aluminum shed with a lot to surface rust. Bleach didn’t do a thing. This may be my answer. 👍🏽
Thank you for commenting, I would love to know how it works.
Aluminum rusting?😕
thanks for the information, great video and review
Thanks for the support 🙏
@@TexasArtCompany welcome!
Thanks for the video. Did it eat the paint off the clamp arm?
Great question! I thought the same thing at first, but I believe the rust actually ate through the paint first.
I subscribed! This is exactly the video I was looking for. All of the other ones on this product were not this informative
Your comment made my day. Thank you 🙏
Had some light surface rust on the door. This actually removed the rust in like 60 seconds. Almost instantly. Works really well!
Amazing to hear. So glad I could help! Thanks for the support.
Honestly, I think 4/5 is being a bit harsh as I would generally expect a very strong chemical smell from reacting an H3+ acid like phosphoric acid.
Im gonna buy it for a tub for an outdoor steel raised garden bed I want to restore so I'll be able to give an actual score instead of just internet jabbing. Sounds like it's a darn good product.
Great point. Come back and let me know your thoughts. Thanks for the support.
good quality video, i hope you get more subscribers!
Thank you so much🙏
Did rustoleum write that opening read?
I get this a lot. With less than 2k subs I can assure you they have no affiliation. But maybe they should if it sounds like it is 😂😂😂
I use muriatic acid and works great and fast. lots of ventilation needed alone with other PPE. give it a try.
Great tip 🙏
The muriatic will eat the metal if you don't neutralize it, hard to do completely.
It will re-rust in one night and it pits the metal. Phosphoric acid is good too. But again it pits.
Can this be applied to a trucks underbody?
I don’t see why not.
@@TexasArtCompany ok I wasn’t sure if the gel would damage rubbers or seals
Are there any videos of this being used on rusted bolts?
I haven’t found many videos on this product, unfortunately. But the product works well on everything for me.
Disappointed that there was no chrome examples. I was thinking of using this on my HD spoke rims
Great point. If you do try it on a sample let us know how it goes. I don’t have any chrome at the shop to test it on right now.
Removes rust from aluminum? If it claims to remove
Yep 👍! That’s what it says.
All I want to know now is if that cast iron finish holds up to impact!!!!
Great point! 😂
@@TexasArtCompany New video idea! XD 👍
@@Dan0rioN You’re awesome 👏! Thanks for the support
I installed alot on my frame leaving it on for a week i think krud kutter better i well se next week
I have not heard of Kurd Kutter thanks for the tip. I noticed leaving this product on too long definitely creates a tougher cleanup.
It has phosphoric acid which actually etches galvanized metal. Unless you're painting galvanized steel, phosphoric acid will partially remove galvanizing on metal.
Great tip, Thank you 🙏
This sounds like an infomercial. Do you have a business relationship with the manufacturer? I.e., sponsorship or marketing deal? Did you get the product for free in return for this “review”?
Not at all. I would love for a big brand to think the same thing. Thank you 🙏
Awesome!!!!!!! Sub'd!!
Thank you 🙏
Removes rust from aluminum?… um
I have not personally tried this product on aluminum but that’s what it says. Let us know if you try it.
@@TexasArtCompany aluminum does not rust lol
@@ridethestorm6690actually it’s hard to find anything made of 100% aluminum. It’s usually an alloy and May rust.
@@ridethestorm6690 It corrodes...
For it to rust it has to have carbon/iron in it which alluminum doesnt. Alluminum can oxidize but cant rust the product im sure means surface rust from something touching or dripping onto alluminum..@abdullahal-shimri3091
I accidentally got some on my thumb and washed it off within 40 seconds. Should I be concerned?
I wouldn’t be.
Buffing also removes rust, and the steel will not rust again easily.
Great tip🙏
You have *fewer* than 1,000 subscribers... But your subscribers probably have *less* rust now.
😂😂🙏, well said. Thanks for the support. 876 and counting!
If you want to try something really works good on removing rust try purple power cleaner spray purple power cleaner on to it last set for 45 minutes go and clean it off the rust is gone Rust-Oleum I do not like that much specially the Rust-Oleum paint it's supposed to help out not have your body rust but it makes it rough even more I know
Thanks for the tip!
It’s just phosphoric acid and hand sanitizer. Don’t waste your money
Hardly a waste of money though
You mean just like every other commercial rust remover? They're all pretty much a phosphoric acid solution with alcohol and a surfactant. Anything else is just fluff, it's the phosphoric acid that is that active ingredient for converting iron oxide (rust) to stable iron phosphate. Not sure why you think this stuff is bad for having the proper active ingredient for its labeled purpose.
It sucks
Hmm 🤔