Bikes and Mustangs! It doesn't get any better than this. I'm gonna check out that mount soon. A+ on product placement too. Good info for installation. Thanks!
I just installed this on my 2016 cbr 1000 and instead of buying a new rubber piece I used a rotary tool and shaved down the big rubber piece on the end that they provide. I got it to where it fits snug inside my fork stem and then cut it to fit onto the mount and it worked perfectly.
This is the few resources only showing this, so thanks for making the video! However, my recommendation to future viewers: I would not ignore the instructions. The stem that you discarded because has 2 ways to fit in, the instructions specifically specify which end to use depending on the diameter of the fork. The rubber stem comes bigger than the hole on purpose, and you are supposed to measure and cut so you end up only with 1" of stem. No need to order extra parts.
Zander glad u were able to get something to keep ur content going. Cant wait for the mustang to make it back. Your content inspired my own 19 GT PP1 UA-cam channel. Drop the Hammer!
I have an X-Grip from one of my bikes, wish id known you were getting one, would have sent you mine. I went RokForm and won't go back to an X or any other grip. Looks good on your cycle though.
Great Video I have the same bike but the SP model the rubber stopper didn’t work bc for some reason the Honda SP model the whole is too big for the rubber stopper it just would fall right threw just FYI.
I have a 2017 CBR1000rr abs. Just bought this exact Hillman part number from Lowes. Measured the piece for accuracy to the package dimensions. It matched. Pushed it into my stem. It immediately fit completely flush (maybe a 1/64 or less of overlap) with my stem hole in a 49 degree garage. So why should I cut it?
Thank you for the video man! I think Ram Mount may have updated their rubber insert - I was able to perform the install on my '19 CBR 1000RR; no need to buy the stopper now.
Nice video. I'd say drill the hole and get tight, then decide to cut it. I'll be doing the same job soon Edit: they made phone mounts that'll actually twist and lock onto that that ball joint with the hinge setup. Idk the name, but they're cool
Zander13 you have to try Monster mean bean lol, I like the bike and yeah it would look cool beside the car, Found you something that hook up to your GoPro www.bhphotovideo.com/bnh/controller/home?A=details&O=&Q=&gclid=EAIaIQobChMI0rnz6c3P4QIVQQOGCh3yBQ14EAkYBCABEgJQTPD_BwE&is=REG&lsft=BI%3A514&pcur=CAD&sku=1092710, Another idea is www.amazon.ca/Motorcycle-Recording-HaloCam-Waterproof-Recorder/dp/B07D371DRF/ref=asc_df_B07D371DRF/?tag=googleshopc0c-20&linkCode=df0&hvadid=292974282235&hvpos=1o1&hvnetw=g&hvrand=18282050414710833218&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9000507&hvtargid=pla-567328081656&psc=1, You have to love Amazon LoL 😂
Nice, helpful vid. But according to the Ram Mount official install video, your install is just a tad off. The stem base is supposed to go much deeper into the stem hole. Your washer should not be flush with the stem like that. You shouldn't even be able to see the washer. Here's there video; ua-cam.com/video/iL6UI4EXzBw/v-deo.html&feature=emb_logo Jump to 5:13 in.
Brother wish the best. However I’m unsubbing. No interest in bike and my feed is pretty full. So weeding out channels that aren’t for me. Rather seen you supercharge the Mustang. I mean no harm. More wanted to let you know why and give you a fairwell.
Bikes and Mustangs! It doesn't get any better than this. I'm gonna check out that mount soon. A+ on product placement too. Good info for installation. Thanks!
Absolutely 💪😎😎
I just installed this on my 2016 cbr 1000 and instead of buying a new rubber piece I used a rotary tool and shaved down the big rubber piece on the end that they provide. I got it to where it fits snug inside my fork stem and then cut it to fit onto the mount and it worked perfectly.
Great thinking 😉💪
This is the few resources only showing this, so thanks for making the video!
However, my recommendation to future viewers: I would not ignore the instructions.
The stem that you discarded because has 2 ways to fit in, the instructions specifically specify which end to use depending on the diameter of the fork. The rubber stem comes bigger than the hole on purpose, and you are supposed to measure and cut so you end up only with 1" of stem. No need to order extra parts.
Were you able to use that stem without having to go and buy a rubber stopper like in the video?
Zander glad u were able to get something to keep ur content going. Cant wait for the mustang to make it back. Your content inspired my own 19 GT PP1 UA-cam channel. Drop the Hammer!
I can’t wait to get the mustang back. But glad we have this in the mean time
Sweet looking bike, makes me miss my old 900rr
Thanks for the vid, got my mount installed securely and easily on my 2017 CBR300r thanks to you!
Get adapter kit to run a charger as well.... I use a different phone mount for my bike but Ram Mount makes a good kit ...
Thought I was going crazy until I found this vid. Thanks for the info, also I was able to secure my phone in using the web.
💪💪💪
Top washer should be smaller so you can get the mount entirely in. Now it kind of stand up because washer stays outside of the fork hole.
I have an X-Grip from one of my bikes, wish id known you were getting one, would have sent you mine. I went RokForm and won't go back to an X or any other grip. Looks good on your cycle though.
Awesome bike...I have a black one so I'm biased
Great Video I have the same bike but the SP model the rubber stopper didn’t work bc for some reason the Honda SP model the whole is too big for the rubber stopper it just would fall right threw just FYI.
Can't wait to see the bike and car together. Nice collection man.
I can’t wait to get the car back
That's a pretty cool mod
I have a 2017 CBR1000rr abs. Just bought this exact Hillman part number from Lowes. Measured the piece for accuracy to the package dimensions. It matched. Pushed it into my stem. It immediately fit completely flush (maybe a 1/64 or less of overlap) with my stem hole in a 49 degree garage. So why should I cut it?
White monster 👍. The new green monster ultra paradise is my new favorite Try it if you haven’t
It’s pretty good. I tried it once
Thank you for the video man!
I think Ram Mount may have updated their rubber insert - I was able to perform the install on my '19 CBR 1000RR; no need to buy the stopper now.
Oh sweet 💪💪
Vincent Genest thanks for the input. Thinking of buying it myself.
same. Just follow the instructions.
My man modding his bike already. 😂😃 I once had my R1 modded before I even bought her. 😀 Great minds!
R1 is beast
Thanks man, you solve my rubber's problem!!
Very welcome
Nice video. I'd say drill the hole and get tight, then decide to cut it. I'll be doing the same job soon
Edit: they made phone mounts that'll actually twist and lock onto that that ball joint with the hinge setup. Idk the name, but they're cool
Thanks 🙏
Zander13; Well that didn't take too long . So how long before you open up the exhaust ?
Soon I hope
Me and my hubby just watched the video and he’s looking at street bikes now🙄 but I still told him no lol
Lol. Just be safe
Is this short arm mount? Thats all I can find!!
Sooo....are you gonna show us a ride or just sitting still? Lol. Can't wait for Carnage to come back, I have something in the works for you.
I had one of these, why am I watching this?😂
does it block the dashboard?
Nice Bro. What editing software do you use on your computer
iMovie
😎🤘
Are you planning to motovlog too, or will we only see it when you're working on it?
Yes. I will motovlog too
NICE BIKE BE SAFE!!! How is Carnage what is the latest?
They just started the repairs
looking forward to a review of this bike im in the market for one
Review coming soon
Think it needs a Mustang logo lol, Zander13 you look like a tattoo hand model for parts......hmmmm No wonder your Corsa poster guy LoL 😂😂😂
I wish I was a Corsa poster boy. I still don’t have their axleback 🤔
Zander13 you have to try Monster mean bean lol, I like the bike and yeah it would look cool beside the car, Found you something that hook up to your GoPro www.bhphotovideo.com/bnh/controller/home?A=details&O=&Q=&gclid=EAIaIQobChMI0rnz6c3P4QIVQQOGCh3yBQ14EAkYBCABEgJQTPD_BwE&is=REG&lsft=BI%3A514&pcur=CAD&sku=1092710, Another idea is www.amazon.ca/Motorcycle-Recording-HaloCam-Waterproof-Recorder/dp/B07D371DRF/ref=asc_df_B07D371DRF/?tag=googleshopc0c-20&linkCode=df0&hvadid=292974282235&hvpos=1o1&hvnetw=g&hvrand=18282050414710833218&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9000507&hvtargid=pla-567328081656&psc=1, You have to love Amazon LoL 😂
Yes. I need to look into helmet audio
Zander13 that would be cool, Give us your thought as you ride, edited of corse LoL 😂
When are you gonna record a ride on the bike
Very very soon
Make a video on your history with bikes. I have no idea what separates a R to a RR lol
Alec Griswold R for Honda means rear of the pack. Honda’s are junk
Awww man...
💯💯👍👍🤘
Nice, helpful vid. But according to the Ram Mount official install video, your install is just a tad off. The stem base is supposed to go much deeper into the stem hole. Your washer should not be flush with the stem like that. You shouldn't even be able to see the washer. Here's there video; ua-cam.com/video/iL6UI4EXzBw/v-deo.html&feature=emb_logo Jump to 5:13 in.
The motorcycle is cool but #gixxergang
I love them all. I’m not biased
Be careful on that bike.👍
always
Brother wish the best. However I’m unsubbing. No interest in bike and my feed is pretty full. So weeding out channels that aren’t for me. Rather seen you supercharge the Mustang. I mean no harm. More wanted to let you know why and give you a fairwell.
You know I’m getting my mustang back in a few weeks right. I have mods in my garage ready to install as soon as it gets back ..🤔