PT6 2023 Hawk-X 250 Cut the hump of seat, modify stock carb and cruising back roads
Вставка
- Опубліковано 6 тра 2024
- Finally cut the hump of the stock seat, used a hacksaw blad, worked very good, then took off the stock carb, removed tamper stuff, adjusted the mixture out 2 1/14 turns, put a 110 main jet, kept the stock pilot jet. Definitely an improvement. Cruised down some back roads and tested top speed, and a wheelie!
txpowersports.com/rps-new-haw...
Use “Motocheez” during checkout at www.Txpowersports.com for discount!
Go to www.MotoCheez.com for upgrades and accessories
-------------------------------------------------------------------------------------------
Like my videos? Links below, be sure to like and follow please :)
Hawk X playlist: • RPS Hawk-X Counterbala...
ALL newest links, manuals, FAQ, technical info and modifications for the Hawk250, please go to goo.gl/U2S2c4
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except maybe a T-shirt once I make them)
VIDEOS OF MODS TO HAWK 250 X:
Coming soon: can use Hawk 250 links, same parts
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper. - Навчання та стиль
That river looks like a great place for some fly-fishing
Yes! It is
Even though Gizmo is not a kitten anymore, he is still adorable. Nice job on that seat, cheezy!
thanks for the ride
i love the hawk X what a fun bike, it got delivered last week fully assembled perfectly and flawlessly, solid boxed and shrink wrapped, padded, no dings or scratches, delivered on time, started right up first crank, they even added the loctite where it was needed, i didnt even have to adjust the carberator they did everything, every bolt and screw was tightened, nothing loose, all i had to do was put the mirrors on and put some R.T.V. silicone where it was needed, just did my first oil change at the 100 mile mark, i tip my hat too txpowesports there awesome, it was well worth the $199.00 extra to get it fully assembled.. txpowersports went above and beyond, ill be ordering from them in the future no doubt motorcycles & parts 👍👍
Awesome. Thanks for sharing
Very nice!
10:52 that was a clean 2gn neon!
Always a pleasant surprise when the battery still has enough juice.
Sure is!
Mice like Motocheez. Hehehe
Yes! 🧀🧀🧀
X-Pro Templar X just back in stock today!
Good bike but you got to make sure they send a motorcycle MCO not off-road MCO or else you can't register it, lot of people have a hard time registering these
I'm in the process of getting the scooter prepped for this season. Just got a new cheaper insurance policy put on it yesterday. Put the new lithium battery in it today that I bought for it over winter time. Just have to re-new the registration and get it inspected again. Then she'll be all set to ride for the summer. I took the Hawk off of the insurance because it didn't get ridden last season. There was little to no riding at all last season, it was nothing but rain all summer. I'll need to eventually turn in the plate for it to get it off the road. It's also going to have knobby tires put back on it eventually and it's just going to be used as a dirt bike. :)
Nice!
@@MotoCheez Indeed, I'm wanting to go for a ride badly. :)
youshould know "mice likes CHEEZ"
Sure do
16:30 time for a sprocket change. Upgear by 25%, then tell us the difference.
My 125 pusheod engine did 63, and so does my vadwr 150.
I keep it geared lower so I can go off-road too.
🔥🔥🔥🔥🔥👍👍👍
Sounds sweet Mr. Cheese. Can you give us a rating on best in class Chinese 250 dual sport and even compare with any other bikes you had in the past. I would truly appreciate as I assume others would. I value your opinion, time and effort in all your videos. Thank you for all you do
I do have a ratings chart at MotoCheez.com, but I don't think I added the last few bikes. But the KPX is definitely on top as far as Chinese.
Yo Moto Cheeze I have a Question out of all of the Chinese bikes that you have tested which one do you think would best fit a 6 ft 250 lb Rider? Thanks for all you do! Stay safe out there.
The KPX 250 for sure. It's taller and has a flat seat and of course fuel injection more power and an actual 250cc engine overhead cam
Ok Thanks I figured it would end up being the most expensive one I was looking at.😅
@dabs8853 haha yes unfortunately that's kind of the way it goes... My only gripe with the hawk TBR Raven all those is that hump in the seat And if you're taller it's really a pain, it's even a pain for shorter people that's why I always shave that hump right off then it's not as bad
So have you taken any time to hit up some of the historic spots in Florida say for instance the Stephen Foster Memorial? 😎
Not yet! 😁
Winter will not loose its grip yet this yr,,the TW is still stored😢
Damn. 75 here today. Yesterday was 71
Maybe I missed it but are you still planning to do the big bore kit?
I was but have not heard anything back from them lately. I should reach out to them
@@MotoCheez heard, would be interesting
Raginredneck93 has a mod for a spring loaded seat release
I'll have to check it out!
Have you tried velcro to hold the seat on?
No. That may work
By any chance know if the zanella digital dash will work on these? My 4&5th don’t show up but everything else seems to work?
Not sure.
Been awhile, when you coming back to florida
Possibly the end of the month but that'll be a short stay and then in the fall. How you been
@@MotoCheez had a health issue for a few months, but back at it. Lol it's hard getting old.
Couple of bikes I'm working on other than that samey same.
@garygreen2466 glad you back! We have to ride next time I'm down! Or swing by the new casa
Cool seat mod tool. Did you know it has a lifetime warranty on the motor? 💛
Lifetime? No. Haven't heard that
@@MotoCheez Your the motor! MotoCheez 🧀
You're traveling fast there Moto... 100(kph)😅.. 63 mph
😅
Man you have a DRZ? How does that compare? I feel like it blows the hawk away
It's 4 times the hawk! My favorite bike of all I've owned
Gizmo says pheasants......it's what's for dinner
.....
Would like to see some Lifan videos next Cheez.
Can anyone tell me Where I Buy The same exact factory engine Brand new reliable site for the 125cc factory engine for the tao tao hellcat
You could try TX powersports I know they usually have quite a few in stock
@@MotoCheez Thank you so much
You sound like me... Get it exactly where you want it... lol, then sell it...
Still can't be first
Sooo close
You can have mine 😊
Keytag your is you want one. Name and address to Motocheezmail@gmail.com
@@Sinerwray thanks
@@MotoCheez thanks
First?
Yes! 1st
Give it to the other person I still have the black stitch tag I think I was the one that bought the last one lol😂
I enjoy your vids but I aint never buying another china bike.
What happened?
@@MotoCheez Rusty chinnesium outta the crate. Sea lvl here so I couldn't make it breath without a carb n a crappy fitting crf pipe. Just a junky lame poor quality rust prone machine. Very poor quality. Very poor quality. Yeah an that pile of stripped everything? mmmhmm kinda made me mad. I could go on. A jap bike is a million times better for just few more bones.
Beep
Meep
Cheap foam,,or u would be wishin for that electric knife,,i mounted a masseuse chair seat on spring on my TW,,,AHHHHHHHHHH
No, this is actually kind of like memory foam believe it or not. The old clock seats were styrofoam and not nearly as comfortable
@@MotoCheez I shall give a hack saw blade a try next time I cut memory foam
hey brother quick question? what size air filter is that on the stock hawk X that you put on in this video? im new too these bikes but definately tool handy.
amzn.to/3ydS5ZR
@@MotoCheez awesome thanks