Fractal Audio FM3: Yet Another Gigging Preset - Demo and Free Download

Поділитися
Вставка
  • Опубліковано 29 вер 2024
  • Another big show coming up, another FM3 firmware update (FW: 3.02), another preset written and shared with you guys. This is just a tweaked version of something you've heard and seen before but if you can find it useful, I'm happy.
    Recorded via FM3 S/PDIF to PreSonus Quantum. Logic Pro X as DAW. Mastered with native Logic plugs using the 'Classical' mastering preset (sans multiband compressor).
    Fractal Audio FM3: www.fractalaud...
    Preset for FM3: axechange.fract...
    Preset for Axe-FX III: axechange.fract...
    Fender 20th Anniversary Esquire: shop.fender.co...
    This video was not requested or paid for. It was made as a service to the Fractal community. However, Fractal Audio do grace me with hardware from time to time so that I can contribute to their user community and upload presets like this (which I choose to do for free). This FM3 was one of the first off the rank and is the headphone-less version.

КОМЕНТАРІ • 45

  • @AndersonCustomGuitar
    @AndersonCustomGuitar 3 роки тому +15

    Dear BOSS, Line6, ZOOM etc....... Hire this man to build your stock patches!!!!!!! Awesome tones Brett!!!!

  • @giancarlopaolini7529
    @giancarlopaolini7529 3 роки тому

    Glad to see that you recovered from the hot chilly pepper challenge :-) by the way ..thanks for the presets.

  • @koorhuis
    @koorhuis 3 роки тому

    Thanks again Brett & Greetz from Belgium

  • @tomsteenwerth1842
    @tomsteenwerth1842 3 роки тому +1

    Hi Brett, as great as always, great fun watching your clips! Question to your presets. I noticed with my FM3 and your presets that the 'drive' sets tend to sound quite harsh, scratchy with and metallic me. I am using either a fender tele american elite or an Orville Junior. Even if I use an headphone instead of my Dynaudio nearfield monitors it never has that smooth, round and warm sound of yours. Couldn't figure what makes the difference (letting alone my much lesser playing skills out here ;-)). Also is there any reason that you connect your FM3 via the presonus interface rather than directly to your DAW? Hope you will have a fantastic gig in Melbourne. Unfortunately quite a journey from deep south Bavaria in Germany ;-)

    • @BrettKingman
      @BrettKingman  3 роки тому

      Is the Wah block on? I did point out the autoengage feature in the video.

    • @tomsteenwerth1842
      @tomsteenwerth1842 3 роки тому +1

      @@BrettKingman Hi Brett, thanks for the hint, yes it was the Wah block which was responsible. Didn't quite get why and couldn't help myself other than just taking in out, but it made the difference! Thanks a lot!

  • @andriebayuajie6503
    @andriebayuajie6503 3 роки тому +1

    Hi how to tame unwanted feedback when in live onstage situation from high gain sound?

  • @rickclark4714
    @rickclark4714 3 роки тому +1

    Looks like it’ll be a great music event. We’re not allowed to have such things in California, alas.

  • @anchoa54
    @anchoa54 3 роки тому

    thanks for this.

  • @jimmycreamer7905
    @jimmycreamer7905 3 роки тому

    Brett

  • @tarponwilly
    @tarponwilly 3 роки тому

    What are you playing through? Are you even using an amp?

  • @MikeWh
    @MikeWh 3 роки тому

    Portrait mode for chilli, landscape for music? Landscape for both please, especially for chilli.

  • @chuck9959
    @chuck9959 6 місяців тому

    Hey Brett, this is probably a very dumb question but it's sounding not as good tone wise coming out of my speakers. Your tone is killer though as I listen to your video. Is it because this patch is set for stereo and I'm running the axe into my apollo mono?

  • @skipbass2771
    @skipbass2771 3 роки тому +1

    hi i see you have a rotary is that on the expression pedal also?im trying to hook the expression so it works the rotary

  • @OzziePete1
    @OzziePete1 3 роки тому +3

    Glad to see you have recovered from your chilli tasting. I was starting to get a bit worried.... Enjoy the show!

    • @BrettKingman
      @BrettKingman  3 роки тому +4

      Haha. Thanks, Pete! I was back at it again the next day. Love that stuff.

  • @Dejoblue
    @Dejoblue 3 роки тому +3

    Your presets are the best I have found. I hope you don't start charging for them; but you really could. Cheers!

  • @jorgea3507
    @jorgea3507 2 роки тому

    Hey Brett, will these work on fm9?

  • @jato1956
    @jato1956 3 роки тому +1

    Brett...thanks for the preset demo. I downloaded this rig, and absolutely adore the Morgan AC20!! So good...great luck on your upcoming gigs!

  • @nadosjamz
    @nadosjamz 3 роки тому +1

    You've outdone yourself, great preset!! Love the AC20. You're right, you really could gig with just that. Excellent. 👍👍

  • @anthonydellorusso9554
    @anthonydellorusso9554 3 роки тому

    Hey Brett...complete stupid question...but what are you running through? I am not sure I understand why some of the presets have the cabinet disabled, yet still sound REALLY good...are you just running the amp simulation through an actual cabinet in your room? Or are you running it to a FRFR speaker(s)?

    • @BrettKingman
      @BrettKingman  3 роки тому +1

      Not at all a stupid question, Anthony. In this video I'm monitoring through some very clean, loud and accurate FRFR Atomic CLR's. You are hearing a duplicate of that sound through the FM3's S/PDIF output (to Logic via PreSonus Quantum). There is only one Scene (8) without the cab block on in this one which I'd hardly ever use as it gets lost with the bass and drums. It's great for recording though. So, on stage: 2 x FRFR wedges in stereo (NEXO's usually, or whatever's provided with the production). I would never run through an actual guitar cabinet because it would defeat the cabinet IR's in the Axe. That's why I go for full range, flat response (FRFR) wedges. CLRS are the best I've tried but nearly impossible to find in backline hire companies in Australia, unfortunately. Cheers.

    • @anthonydellorusso9554
      @anthonydellorusso9554 3 роки тому

      @@BrettKingman Thanks, Brett!!!!!!

  • @jimmycreamer7905
    @jimmycreamer7905 3 роки тому +1

    Your simply amazing sir brent

  • @chriswalsh4203
    @chriswalsh4203 2 роки тому

    As someone still trying to master my FM3 and presets, I've downloaded Bretts preset but it sounds tinny and sharp--what am I doing wrong? Or alternatively what do I need to do to 'soften" that tinniness or sharpness?

    • @BrettKingman
      @BrettKingman  2 роки тому +1

      The wah is on auto-engage, Chris, and I'm guessing that is your problem (it's a common mistake). If you don't have an expression pedal or if you use yours in a different way to mine, it is likely on. You'll need to disengage the wah block or delete it if not being used.

    • @chriswalsh4203
      @chriswalsh4203 2 роки тому

      @@BrettKingman Instant result! Much better now--thanks so much--so much to learn :)

  • @frantisca
    @frantisca 3 роки тому +1

    Scene 5 the Morgan just nails it ! Control with the guitar’s volume is superb !

  • @philiprobinson593
    @philiprobinson593 3 роки тому +1

    Thanks Brett. I love these Videos and will enjoy trying this out. i might put a tape delay in for morgan AC 20 and see what that is like. Cheers

    • @BrettKingman
      @BrettKingman  3 роки тому +1

      There you go. I hope it does the trick for you, Philip. Cheers!

  • @SL-zw7ts
    @SL-zw7ts 2 роки тому

    Does it means i can set it as button 1 - clean, button 2 - overdrive and button 3 for lead...?

    • @BrettKingman
      @BrettKingman  2 роки тому

      Yes, that's an easy one. You can also assign the switches with a 'hold' function to, say, bring up the tuner or turn on a compressor or drive, etc. Or, the switches can be configured to go to other 'layouts'. There's not much it cannot do.

    • @SL-zw7ts
      @SL-zw7ts 2 роки тому

      Thanks Brett!!

  • @Lexxo777
    @Lexxo777 3 роки тому

    Nice one Burgs! Hope the gig was great.. St Kilda, Outdoors, Melbourne is BACK!

  • @paulnagle6867
    @paulnagle6867 3 роки тому +1

    Magic tones again Brett, have a great gig!

  • @brendoncolemanguitar3063
    @brendoncolemanguitar3063 3 роки тому

    Hi Burgs .. interesting that a lot of players utilise the Cab Block Low Cut with their live presets with a 80 to 120 hz cut . Do u find youself introducing this depending on the room or stage setting ? Or with you using the CLR you find you dont need any Low cut and just apply some High cut .. Great vid , Thanks

  • @michaelrengis6536
    @michaelrengis6536 3 роки тому +1

    Awesome mate. Try downloading even with new firmware for some reason nothing comes up it says no amp used when I try and import from my downloads

    • @BrettKingman
      @BrettKingman  3 роки тому

      You sure you're not trying to install the Axe-FX III version into the FM3, Michael? I just did the install from Axe-Change and it's fine here. FW: 3.02.

    • @michaelrengis6536
      @michaelrengis6536 3 роки тому +1

      @@BrettKingman I'll double check brett didn't think of that. By the way you rock mate love your stuff

    • @canuckcdawg
      @canuckcdawg 3 роки тому

      @@BrettKingman I'm getting the same as Michael. Definitely using the FM3. When I import, it comes up as an preset. Not sure why. I used the same process with another preset just to see if it was a "user error" on my end. Even if it doesn't work, thanks for all the videos that you put up and it's great to see some parts of the world doing live shows again!

  • @2015IeepWranglerJK
    @2015IeepWranglerJK 3 роки тому

    Hey Brett, I have been following your awesomeness for quite some time. Which layout do you recommend me using for my FM3 and FC6 when I want 4 scenes and 4 Effects and the last switch being the tuner. I use a separate preset per song

  • @Franniboyful
    @Franniboyful 2 роки тому

    That was super, Brett!

  • @Cherry_Sunburst
    @Cherry_Sunburst 3 роки тому

    Just great! Thanks a lot.

  • @jimmycreamer7905
    @jimmycreamer7905 3 роки тому

    He’s very accurate