An amazing case you can actually AFFORD!
Вставка
- Опубліковано 5 чер 2022
- Learn more about the BeQuiet! Pure Base 500DX at www.bequiet.com/en/case/1854
Get 20% off CableMod Custom Keyboard Cables at Amazon - Learn more at cablemod.com/cablemod-keyboar...
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2JayzTwoCents - Наука та технологія
I love my 500DX, easy to build in and affordable. Also put a Dark Rock PRO 4 cooler in, nice, cool and quiet!
Damn dude, same
same dudes, same
Same squad =)
Same but Dark Rock 4 without a PRO xD
I love that thing, shame it's such a bitch to install.
BeQuiet is mad under rated
To me most of those look like the came from the same factory
I've had this case for a little over a year and I absolutely love it. It's still more quiet than any case I've had previously, but the thermals are great. All for a decent price. And the white design is just killer.
Congratulations 👆👆👆
You won 🥇 🥇🥇🥇
Basic method of getting a quite case is good ventilation, and many high quality low noise fans running slowly. Modern PC systems with high end processors and graphics cannot survive in a case with small openings. Fan choice is extremely important and best to over spec the CPU cooler so its fan(s) can run slow. Do not skimp on the power supply as the internal power supply fan can cause excess noise if running near max output.
@@geoffreyveale7715 Silence is key
Can you put in 3.5 hdd-s aswell?
@@makingastardestroyer3066 get an m.2 or sata ssd
I've had this case for over a year now. Still love it.
u think it could cool i7-12700k and 3080 ?
Same! Great case.
@@mishaq6538 it cools a 5800x and 3080 for me easily
Same.
@@mishaq6538 absolutely.
Since its release, i think that the 500DX is the case I sold the most at my shop, really easy to build in, the build quality that we can expect from a big manufacturer like Be Quiet, fits almost any components, pretty good ventilation ( built a few with 5900X/5950X and 3080's with no heat problem when we add a few fans, just the right amount of RGB. And the most important for our customers, HOLY SH*T it's affordable !
Built similar set ups and putting another exhaust fan on the back end up top did wonders for cooling when using Air coolers only.
Is there any problem with air coolers? Id like to buy the noctua cause it's considered the best but space seems tight
@@hasantylou7670 if it can fit in this case ( most of them do, slight doubt for the D15 ) there is no problem with air coolers.
But as said earlier, you might want to add an exhaust fan at the top-back if you are cooling an I7/R7 or bigger.
if u put 3080 in to u need a gpu holder?
I use a 500DX and I love it... whats important to mention is, that the Hard Drive Cage has two positons, one further away from the front of the case... Squeezes the PSU Cables a bit, but a 280m Radiator fits in there perfectly
360 as well :)
@ If you mount with the tubes up, that might be the case, mine is mounted tubes down and that would not fit with a 360 and the cage
@@nabronator374 That is definitely the way in my case (pun intended:)) Regardless this case is amazing and I just hoped someone would point to the fact that the cage has two positions.
I just built in this case a few days ago with a 360 rad in front, you will need tubes at the top if you want to keep the drive cage. Using the pure loop 360 the tubes wouldn't even reach the bottom around the gpu though, and I assume this is likely the "case" for most 360 aio's.
I recommended this case to a friend a few months back just because of the bequiet name, since I've got their fans and an air cooler. He really liked it, I looked up some more in-depth reviews such as at Gamers Nexus and got my own one just about a week ago to build an entirely new system (excluding SSDs and HDDs and the cpu cooler from the last one). This was my first time where I built a computer completely from scratch with my own hands, not just replacing some parts. It took an entire evening and most of the night due to my inexperience, but it turned out pretty good in the end.
I use this case for 1.5 years or so now and I absolutely love it. Easy to build in, everything can be routed nicely, its super quiet and looks clean af. Perfect for everyone tbh!
I bought this case 18 months ago (white version) & I'm still enamoured with it, the thermals/noise levels are excellent & it's an exceedingly well engineered design. Though you forgot to mention that aside from the stylish front rgb panel, there's also an rgb strip inside the case for additional lighting.
Just said thst of the rgb stril.
Wait WHAT there is rgb in my case? Can you tell me where it is please? (Im a first-time builder and didnt notice a rgb strip
@@miskapiska2188 is just up the glass panel, in de inside, so it gives light to all the case and the floor a little.
@@miguelangeldominguezbriant9178 thank you
@@miskapiska2188 It's on the underside of the top of the case, on the side of the tempered glass panel.
I have this case in black and I love it, the mix between great airflow, easy to use, shrouded PSU, great fans, affordable price, it's fantastic for what I needed. Great to see you review this Case Jay.
I am using my 500dx now for over a year. it is a cool case.
Congratulations 👆👆👆
You won 🥇 🥇🥇🥇
I have a 2 year old build and need a few upgrades so watching you talk about cases or components really helps me think about my options but also keeps me informed about whats available. Thanks Jay and team!
About 15 months ago, I got this exact case. The airflow and quiet nature are phenomenal and the RGB is nice. I couldn't be happier with this case - I've become a bit of a be quiet fanboy as my CPU cooler is from be quiet and while I got a three-pack of bog-standard fans for exhausting through the top, I did as Jay recommended and moved one of the included fans to the front for air draw purposes.
You really can't beat the combination of value, air flow, looks, and (lack of) noise. You won't be disappointed with this case!
I bought a Be quiet! PSU and it lasted me years so i took a chance on the silent base 802. It was extremely well built an looks awesome. Also compared to building in corsair cases building in it was a breeze.
I've been using this case for 1,5 year, mostly for a very old build, waiting for a long overdue upgrade. Incredibly easy to build in, incredibly silent with the stock fans configuration, amazing temps for both the GPU and CPU. (i7 975 extreme slightly OC)
Can't say how much this beauty changed my life, the build quality is amazing, and to make it even better, it's really affordable.
Great case! :)
Built mine three or so months ago. Easy to build in all around great case, never got the front rgb to work. 360 aio and a tuf 6900 fit inside no problem. I moved my drive cage back a bit and shoved all my extra cables inside, used white cablemod cables to chuch up the pc a bit. For the price and all of what you get you can't go wrong.
Thanks for watching
You have been selected among the lucky winners, inbox
You are absolutely right with the cable channel. I did a build in this and using custom Cable Mod cables was horrible since my 24 pin was right next to that cable channel. It forces the cable to do a hard bend to plug in.
I was thinking the same. It might work if the 24 pin connector was a right angle off the MB but it'd be horrible if it was pointing straight up. Also, my Seasonic PSU has a hard material wrapped around the cables near the 24 pin plug and that absolutely will not bend. This L-bend looks like a cheap alternative to using rubber grommets.
I’ve been thinking about getting this case! Just upgraded to a pure rock 2 black and that thing makes such a huge difference! It’s super good quality and I’m sure this case is no different
Get it I bought this and a dark rock 4 to upgrade from my ibuypower and it's been well worth it
I actually have the black 500DX and the black pure Rock 2. Both work really well and look very clean together:)
Is fantastic, airflow is good, easy to build and really quiet. Also the rgb is good, no more software issues. The rgb is all controlled by the case front panel
I also got a pure rock 2 black a week ago, aiming to get this case as soon as I find an affordable one in my country :D
Thanks for watching
You have been selected among the lucky winners, inbox
I'd love to see a build with this case if possible. I recently built my first PC in that case and I was very satisfied with the out come. Although, as you mentioned, the channel for passing through the cables is quite tight so I resorted to passing my cablemod cables through the small opening that has the 'BeQuiet' name to right right of the motherboard. And I gotta say passing the cables through that opening made the cables look really sweet!
Thanks for watching
You have been selected among the lucky winners, inbox
Had the Black version of this case for a while the only problem I can say I have with it is I really hate having to screw on the glass panel with four screws I would rather have it either on a hinge or slide out because that's way easier for maintenance. Besides that the case is pretty damn good
Thanks for watching
You have been selected among the lucky winners, inbox
same
I would like to see it with a 5.25 bay. I still sometimes use discs. And plastic instead of glass as a precaution for children.
Electric screw drivers are like 20$
@@ricksanchez7250 if we use that logic for absolutely everything there would be no progress there are other ways of doing it which are better.
I bought this case a few months ago and I love it. It's really good. Easy cable management, default configuration is good, great thermal performance while staying rather silent and the white case looks pretty damn good in my opinion. Definitely case I would recommend to anyone if they find the price acceptable.
Thanks for the review Jay! I think people severely underestimate how important a case is so keep the reviews comin!
Thanks for watching
You have been selected among the lucky winners, inbox
I've got the non-DX version. Less airflow, no RGB, monolithic front panel with side mesh intake strips. Love the general case design and buildability.
Thanks for watching
You have been selected among the lucky winners, inbox
Que tal de temperaturas?? Se calienta mucho?? Escogería la version airflow o la versión silent??
I've had my 500DX for two years. It is awesome. The cooling is extremely good and it is indeed quiet. The standalone or bridged RGB to your motherboard is a nice touch as well.
Thank you for the insights. Especially the sound quality from cables
Decent price for a decent case.
And yeah, Jay, keep highlighting the new cases which are on the way/already out because we're always thinking about future upgrades.
Thanks for watching
You have been selected among the lucky winners, inbox
I’ve been running this case for about a year now with a 3700X and 6700XT, all air cooling, fully populated with fans. It’s a very quiet case that is nice to build in, highly recommend if you’re looking for a new case
Love the reviews you do on cases. Often times get inspiration for builds/upgrades off of what I see and here on this channel. Often times, a review on a case may also shed some light on other companies that build some pretty good product that I may never think of, or even realize are out there. Keep it up! Love the work you do!
I love my 500DX, had it for just over a year. Really love the brand, I made sure all the fans were be quiet, suuuuuuper quiet!
I love Pure Base chassies. I've built several sets with PB500 and PB500DX for me and several friends. Noice'ly ventilated, moderate, not overflowing with cheap RGB, very tasty. They've put more care into the quality of how it's built than the into it being "flashy" (Epileptic). I recommend it to anyone who ask me about good and affordable builds.
La version silent, pure base 500 or 600, no dx, que tal las temperaturas!? Se calienta mucho al no tener fronta mesh y tener aislante, o van bien?!
You can run a 360 radiator and move the HDD cage to the back. There are threaded holes prepared to just mount it on that position. I also have a vertical mounted GPU in it (still enough air to the radiator), the stiffness of the back is not a problem. Still had to saw off the spacers.
I built four mid- to highend PCs in this case, absolutely love it.
Great! I just ordered one for my new build, it'll be great
I used a 500DX for my first and only build so far specifically because I wanted to save money and accompany a Noctua CPU fan. Never have I ever had to worry about my temperatures so far. Love the case! (I use my build for everything, from gaming to video editing.)
Just got one of these cable mod keyboard cables. Really good quality and a lot cheaper than most of the custom ones made like it. Think I paid like $80 CAD for my other one. Paid $50 for this one and easily as good if not better.
Thanks for watching
You have been selected among the lucky winners, inbox
Would love to see case reviews include a built system at the end. I know this takes time, but throwing a bare bones air-cooled system in to see the LED's in action etc would add value I think. Wouldnt need to be a full build, just PSU with mobo/cpu/ram to get it to power on.
When you do that with cheap hardware it can reduce value of the videos.
@@hokiturmix how? Not suggesting you feature the build process, just have a 5 sec shot at the end with it powered on. Black motherboard, factory cooler and non-rgb RAM. No emphasis on the hardware, just on the powered on case.
Thanks for watching
You have been selected among the lucky winners, inbox
Been using this case for just about a year, pretty easy to work in and looks great on my desk
Can confirm. Build with this case and be happy!
Did this case for my recent build and I love it. My only complaint is I had a weird rattle in it due to my HDD. Adding more rubber to the feet got rid of it as a cheap go to fix thankfully. And the RGB cable doesn't work with any board I've tried to connect it to, but at least it has a button. Otherwise, it's silent, easy to clean, and well built.
Congratulations 👆👆👆
You won 🥇 🥇🥇🥇
That cable works for me, but the button on the front can mess with RGB software
my dogs ate two of the rubber isolator mounts, after they fell off the screw pins on my dark base 900 pro v2...I'll be needing some of that rubber for my build too... lol
Jay, cases are never boring. It's literally the stage that your entire build dances on
Thanks for the review. Always good knowledge for future builds
I love mine. Cool, quiet, easy to clean and just so enjoyable to build in
Up to and including my last build in 2019, I was completely in the camp of cheaping out on the case. Was always about the last thing I added to cart and I always tried to spend $50 or less. Seeing all these really nice cases now and seeing reviews including info on airflow, noise, etc, I'm seriously considering just buying a nice new case to transplant my build into. The internal components are great and all, but what I'm looking at all day is the case.
Thanks for watching
You have been selected among the lucky winners, inbox
I have this case, it is pretty nice and not very expensive. I like to go a little above the cheapest spec usually and smaller but this build is going to have fully populated PCIe with a 3900x so I figured a few more $$ on a decent case was worth it.
One of the best bang for the buck in the mid-tower range. Competition either has the 2x200 1x120 (Lian li) or 3x120 at the front, but slightly more expensive.
Thanks for watching
You have been selected among the lucky winners, inbox
lol... lololololol
I just bought this case, and I love it. It made for a very quiet and clean build.
Yup love this case, had mine for a year and I have no plans to replace it anytime soon.
Got this case a few weeks ago and it's fantastic. Love the design and tasteful RGB. Got the white version and it already has dog hair all over it, but that's my own drama to deal with. Just keep that in mind if you have pet hair and want the white version.
Thanks for watching
You have been selected among the lucky winners, inbox
Nice, but suffers from the same problem my Cooler Master H500 ARGB has- only a 240 radiator up top, not a 280. Maybe not a big deal with a custom water loop where you can put a 360 up front too, but with an AIO the best place is up top exhausting - and a 360 or 280 AIO up there makes more sense. You can get a 280 FAN up there, but not the radiator too... I know, the front, the front... yea blow hot air into the case... I think the best use case here is an air cooled setup... nice and compact.
many tests have shown that an AiO in the Front does not really affect the temps of the other parts. so I don't see the Problem with that
@@penedrador True. As long as the air being blown in is cooler than the air in the case, then the airflow will have a positive cooling effect. But you need to get some airflow across the GPU to push its warm air out the back of the case. If using an intake AIO on the front, I think some high pressure fans would be better.
I'll stick with exhausting hot air. Yea I keep hearing it doesn't matter, but my gut tells me that the cooler you keep the insides, the cooler the end result... Heck I see in summer, my rig is hotter because I can only get the room so cool when it's 108f outside... those extra degrees make a difference in the rig's temps, so I am not going to add to it if I can help it. Also trying this time around, to like the AIO enough to not go back to my custom loop, too much work, I would rather use the rig and not mess with it because it is never perfect LOL... but I just might because of the tinker-addiction. Then I would have to put my 360 up front.
@@tzviasegal3003 you could exhaust with just fans and still put the AiO in front😁
Your CPU and Water temp will thank you, the impact on GPU temps is nearly negligible
I have an old CM Storm Enforcer case. 11 year old design, but an included 200mm intake fan. I added another 200mm fan to the top rear of the case as exhaust. Incredible airflow and dead silent. So to make a quiet case just use 200mm intake front and 140mm rear exhaust. Quiet is easy, larger slower moving fans.
Thank you Jay. I was looking at this case for 2 years now. And bought it today after watching this video.
I love my 500DX. Easy to build in, very high build quality for the price. After building in a couple lian li cases, and a couple corsair I can happily say I'll be actively looking at building in a be quiet for my AM5 build. Also, If you remove the be quiet logo where the 3.5 SSD standoffs are you can 3'd print Pump Mount to fit in that logo's bracket. Pump mount fits with a 6700xt red devil in my 500dx
reservoir location is the hard part.
Thanks for watching
You have been selected among the lucky winners, inbox
So random to see someone with my same build. I dont have water cooling atm, but I want to look into ur mentioned mod!
I also have a 500DX case for my computer. I love how quiet the system is, even in high setting games.
Might get some more be quiet products for my computer, i do like that they give us value for money.
Thanks for watching
You have been selected among the lucky winners, inbox
And they actually are free from scandals and shady business practices. And they take QC seriously. Their PSUs are one off the best, too. I think everything they make is good quality.
@@scotchbreit13 thanks for sharing. I was looking for a new psu one of these days and i am interested for the streight power 11 650w psu. Wither that or the pure power 11 fm 650/750w psu.
I bought this case (the black version) for my first build in January '22 and I love it. It looks great, super easy to build in, great airflow. The removable SSD tray makes cable routing super easy, it's very easy to hide all your cables and get a super clean look.
Thanks for watching
You have been selected among the lucky winners, inbox…………………….
I used to have a build in this case before I switched to ITX, and hands down this was my favorite case to build in ever
No reset but instead rgb controler button? Wtf?
I've had this case for 1.5 years now and it's fine, nothing wrong with it (other than lackluster front IO). It is however NOT silent, you can clearly and loudly hear your GPU fans through it.
What's your fan arrangement? If you leave it at stock, the 2 exhaust fans will steal all the air away from your GPU, making it work its fans harder and louder.
I'm also wondering what the seal is like around the TG panel in this case as I don't see any cushioning around it.
That’s the situation for any airflow case. The GPU is loud, not the case.
"it's been out for a little bit here"
Yeah, like a couple of years 😬😂
That was my thought lol.
"Already got the recommendation from Beve Sturke from Namers Gexus. I know what the result of this vid will be!"
Thanks for sharing this review, this case seems right up my alley!
Thanks for watching
You have been selected among the lucky winners, inbox………………..
Hey Jay, about that "new" 500DX:
I had my R9 5900X and RTX 3060Ti set up in it for almost a year(sold it), then I built in a Phanteks P200 case and had that system for almost half a year and sold that too. So how NEW is this case exactly?
I love seeing my case in your channel. It's one of the best investments I did for my setup. It's has good airflow, it looks nice and it's really freaking silent, and it also has a LOT of space inside for cable management too even though it's a mid-tower.
Thanks for watching
You have been selected among the lucky winners, inbox✅✅✅✅
Got this case last year, I love it! Fits the NH-D15 no problem
Nice, i've been looking at the 500 pure base for my new system upgrade. Glad you did a review of it :)
I love mine. Love that it comes with great stock fans
Thx JayZ. I needed a case video to watch today
Awesome review and awesome case. I built my system with it about two years ago. It hides thick cables and drives beautifully. And man is it quiet!
Thanks for watching
You have been selected among the lucky winners, inbox………………..
Bought this case 2 years ago for a silent office PC build. Still very pleased with it
I just bought it two days ago and will arrive tomorrow. Cannot wait to start building and hopefully have a more quiet pc afterwards.
I love my 500DX. Plenty of air flow, looks good, lots of room inside...and the lighting looks GREAT. I run ARGB fans off the mobo, but kept the BQ LED circuit separated so as to get contrasting colors. Pulled out the fans and replaced them with white housing ARGB's. The top mount grill actually does catch a fair amount of dust being blown out & is easy to clean.
Thanks for watching
You have been selected among the lucky winners, inbox✅✅✅✅
I love it the DX 500 is the best case I have used to this point for air flow. great case.
Two years with it, love it, de rgb is súper sweet and the rainbow cascade is really smooth, my doughter lotes it. You forget that it has a rgb line up the glass pannel that follows the front rgb. Pretty sweet
Thanks for watching
You have been selected among the lucky winners, inbox✅✅✅✅✅✅✅✅✅✅✅
Just got mine yesterday. Can't wait to build it. I also went for 240mm Corsair H100i on top...
Love the case reviews! Would love to see more!
Bought this case for my build and do not regret it. Great case. Easy cable management, plenty of room to work with, decent fans/RGB. The front I/o cables use plugs so you can remove them from what you do not want use.
Cons I have found so far:
Cheap power button connector (button itself feels ok).
Cable management plate can be difficult to get back on after install.
Just used this case for a nephew's graduation build present. Plenty of space for a 3080 and a Noctua NH-D15. We added 6 Lightnings 140mm fans with the ARGB hub and fan hub. The only quirk was the extension cables which were connected to the MB before it was installed. After that cable management is a breeze. Do away with that minor issue all in all it's a great budget starter case.
I bought a BeQuiet! Silent Base 801
a few years back and it's still my favorite case to date. I just ordered a big 14"x14"x14" 3d printer and the first thing I'm printing out is a replacement vented front cover as I have the first model that didn't come with the optional vented front cover.
I have built in two of these cases, one black, one white. For my brother and I. The fact that you get Addressable RGB lighting, 3 140mm premium fans, good airflow, and its quiet makes this the best case at the $99 price. This case is not new, perhaps new to Jay, but I've owned my case for the last year and a half and it has been a joy to build in. Also it's a great show-stopper case to put on your desk :) especially with 3 120mm RGB fans behind the mesh. Makes a cool effect on the front of the case. I really wished more people talked about this case, so thank you Jay!
I have this exact case, perfect thermals! No need to add extra fans if you're going air cooled only just make sure to position the CPU fan pulling air out towards the rear fan.
Thanks for watching
You have been selected among the lucky winners, inbox………………..
Very much enjoy how my system looks in the case. Corsair Obsidian 500D RGB SE is what I am currently using with LL120 and ML140 fans throughout the build.
I moved the front fan to the top and put in a 360aio and have a 3080tuff. Love this case. Great thermals and noise. You described the exact scenario of my pc. I did leave the filter sitting on the top even though it's exhaust and it doesn't seem to matter airflow wise. Although with the 3 case fans for exhaust and the 3 aio fans for intake, it's got everything going for it that the top airfilter isn't going to hurt it much.
ive been using this case for about a year and i absolutely love it! i will say though i wish you could do more with the front ARGB
i had this case a year or two ago when it came out, solid case I really liked it, my friend has it now.
I have this case and it has excellent air flow and is decently quiet. I wanted it for the rgb because I was tired of using a software. Rgb is really nice. Is overall a good case and probably the only case I need for a long time
Built my latest rig a year ago using this case and it has been perfect for me. Even though I share serious concerns about shopping at "the egg" I did take a chance on my Be Quiet purchase during a sale and got this for twenty bucks less than the competitors and received it in perfect condition.
I love this case. I have a black one with a 360 AIO fitted. I found it really easy to build in, so much so that I used the white version for my wife’s build. She has a 240 AIO fitted up top with plenty of room for the Corsair Dominator Platinum RGB memory. Cannot recommend enough 😀.
I have one in Black and put a Noctua NH U12S AM4 in it. It does what it is supposed to and keeps everything nice and cool. Happy with my purchase.
I built my son's PC in one of the white Be Quiet cases. I actually enjoyed it and he is happy. We did notice some of the issues Jay points out too. But still happy.
I went with BeQuiet for my AIO, Fans, and Case and I am extremely happy with it. Looks clean, sounds good, good build quality, decent prices. BeQuiet doesnt seem to get much attention in the midst of a lot of their competitors for some reason, which is a shame. They are making some really solid stuff.
One of the reasons why I went with "Be Quiet" this time for my case.. is some of them are very modular in design to the point you can custom make your case into what you want it to be.. for me the big plus side was my case is able to flip the motherboard upside down to have the case sitting on my left side ..also providing better thermal cooling for the graphics card (plus you can actually enjoy the design that is normally under the card)..
@@rknudson1407 I completely agree. I spent more on the Silent Base 802 when I could have just gotten the 500DX, but the 802 has so many options to keep it fresh or add drives that it's got room for me to grow. I also plan on using it for my future builds
It would be cool to see a video with a full build in this case.
I’ve built 3 PC in this case and have another on deck for a fourth build. Love this case!
Thanks for the info Jay.
Thanks for watching
You have been selected among the lucky winners, inbox✅✅✅✅✅✅✅✅✅✅✅
This is great! I literally just finished my latest build and I used this case. I actually came looking for a review on it from you before choosing it.
This is so great, planing to build with this(or soon last gen) hardware besides gpu and i had alot of issues in choosing case, this is probably what i seek
I love the look of this case so much. Can't wait to get mine. Im building a be quiet! based build for my birthday purely for how it looks. I just really like how simple and clean the products look especially the RGB fans
Built three PC's in this case for my friends and I'm absolutely loving it. Building in this case is such a breeze and it's premium feel out of the box.
The 3 included fans is a great trait and gives a fair start to everyone. 😁
My 10yo daughter built her PC last year in this case. And for fans, we used the Asia Horse 360 Matrix. I know its cheap but it does work good still and its looks awesome behind the mesh front and the lighting design goes well with the dual led strips down the middle.
I got one 2 months ago and I love it. It was super easy to build in, temperatures are great, it looks and feels very good (especially for the price), it's kind of compact but offers a lot of room and, of course, the price was excellent. I got some of be quiet's RGB fans pretty cheap in the same store and impulse bought them too. Love the new setup (just my old GTX 970 is extremely loud now, my old case was a Nanoxia Silent Case, so i didn't hear it as much...) and I'd buy it again anytime. Cool to see you showing the case off in this great presentation!
All Be Quiet! products I have got (fans and air cooler) are very good quality and show attention to detail. This case is really interesting.
Thanks for watching
You have been selected among the lucky winners, inbox✅✅✅✅
Case reviews are my personal favorite content of yours. Love this stuff
Thanks for watching
You have been selected among the lucky winners, inbox✅✅✅✅
Rockin‘ a 500DX with a 360 rad in the front and a 240 rad at the top. RAM clearance with the top rad came down to a few millimeters. Great case with awesome build possibilities in a relatively small form factor.
This is the case I've been looking at for my next build.
I got a 500DX in black. I love the case. Got a DarkRock Pro 4, and an additional exhaust fan, for 2 in front, 1 on top, 1 in back. Really nice cooling, quiet. And it suits my black, gunmetal and orange theme beautifully
I love my BeQuiet Fractal Design R5! It's really quiet! And... COOL 😎