Greetings from Austria, in August i have installed a Solax System in my home, X3-Hybrid G4 15Kw (33x 450 Panels 14,8 kwp) with the HS36 Batterie (5 Modules = 18,4 kwh). Watching your Videos got me thinking about getting a EV Batterie 😅
Great explanation, so satisfying when a plan comes together. No doubt you will get the problem with the communications resolved. Good luck and well done.
Again a very interesting video! I would suggest do do something against the moisture coming in via the data connector. At least put some silicone in to prevent water coming into the battery during winter. Also for your friend with the 2 batteries! Keep on with the professional work!
extremly interesting video. In the moment the most important information for me at UA-cam, but it doesn't matter if you share it a couple of days later. Thank you very much for your great work.
Really nice work! Just don't short those Lillygo's between them. You have GND on USB on the side and it's very close to the other Lillygo maybe touch IC on the other.
A very professional built, as always! Well done. Where do you get all those batteries from? I did the same with a Nissan Leaf battery, but hat substantial problems to get one. I had to import it from UK! I do not understand why you built in 2 Lilygo's for one battery. Did I miss something?
@@ianlighting100 Yes, I understood that one, but one LilyGo can be connected to the CAN Bus AND to the Inverter (RS485), hence the two ports. 2 LiliGo's you only need with two batteries. I understood, that he connects one to the battery and one to the inverter. That would not work. But watching again, he explains it after 12:00. Such setup I have never seen before. Probably Solax specific as he says.
Hi nice explanation! One remark, your RS-485 is instable, do both lilogo's come with resistora (120 Ohm) If I'm correct, if not, try to install 2 120 Ohm resistors on both ends on the cable. If they are not terminated you might get issues with RS-485. This might also be the case with CAN, but you have to check that one. Keep up the good work, wishing you lot's of sun and high yield on your selling power!
Great Video, excellent explantations! So the Car Batteries could be reused for Home Storage…Where did buy this big battery? Ist it possible to use Batteries from other cars. Do they have a similar protcol? Thanks a lot!
Absolutely. You will have a glans of it in this short trailer video: My new solar / grid storage battery is now being tested. ua-cam.com/video/xSeVRhE7kKk/v-deo.html
@flyingtools Ah okay, nice ... is this normal 230V flloor heating? There are also infarot versions, I don't know if they have any advantages. Which price did you paid? I stick to "normal" LFP cells, I paid 47€ per 1kWh.
11 днів тому
Do you know if it’s possible to do this with a G3 solax inverter? Thank you!
Greetings from Austria, in August i have installed a Solax System in my home, X3-Hybrid G4 15Kw (33x 450 Panels 14,8 kwp) with the HS36 Batterie (5 Modules = 18,4 kwh). Watching your Videos got me thinking about getting a EV Batterie 😅
Riktigt nice lösning, stort tack för att du delar med dig! 😃💪
Great explanation, so satisfying when a plan comes together. No doubt you will get the problem with the communications resolved.
Good luck and well done.
Thank you so much, and yes it really is.
Dala have fixed a bug in the software so it should work now. I have not tested it yet.
Mycket bra och inspirerande som vanligt! Superkul att se! Grymt jobbat!
Så kul att höra! Tack så jättemycket 😃🙏
Again a very interesting video!
I would suggest do do something against the moisture coming in via the data connector. At least put some silicone in to prevent water coming into the battery during winter. Also for your friend with the 2 batteries!
Keep on with the professional work!
Thank you!
I already mentioned that in part one, but thanks anyway for the advice 👍🏻
extremly interesting video. In the moment the most important information for me at UA-cam, but it doesn't matter if you share it a couple of days later. Thank you very much for your great work.
Thank you 🙏
I fixed some of the bugs you mentioned, they are now included in 80dev version!
Thats awesome, thank you so much!
I will try that out 😃👌🏻
Really nice work! Just don't short those Lillygo's between them. You have GND on USB on the side and it's very close to the other Lillygo maybe touch IC on the other.
Thanks! I’m very well aware of that. Thanks for the concern☺️
Thanks for the video. An idea for 5v without power from the grid is just use a powerbank.
But that’s pretty much what I do, but with an 12 V power bank that work as an small EPS unit instead.
That's awesome. I've been using a 516 volt battery Jerry ranked too an old discontinued Tesla inverter.
A very professional built, as always! Well done. Where do you get all those batteries from? I did the same with a Nissan Leaf battery, but hat substantial problems to get one. I had to import it from UK! I do not understand why you built in 2 Lilygo's for one battery. Did I miss something?
04:25
@@ianlighting100 Yes, I understood that one, but one LilyGo can be connected to the CAN Bus AND to the Inverter (RS485), hence the two ports. 2 LiliGo's you only need with two batteries. I understood, that he connects one to the battery and one to the inverter. That would not work. But watching again, he explains it after 12:00. Such setup I have never seen before. Probably Solax specific as he says.
Thank you 🙏 I buy them here in Sweden or Norway. And you are right. The two Lilygoes is used together with Solax.
Merry Christmas!
Merry Christmas!
Very good educational videos, I'm looking forward to the next one.
Thank you ☺️
Hi nice explanation! One remark, your RS-485 is instable, do both lilogo's come with resistora (120 Ohm) If I'm correct, if not, try to install 2 120 Ohm resistors on both ends on the cable. If they are not terminated you might get issues with RS-485. This might also be the case with CAN, but you have to check that one. Keep up the good work, wishing you lot's of sun and high yield on your selling power!
Thank you 🙏. It has the 120ohm on the can side but I’m not sure about the rs485.
I will check that out. Thank you so much for the advice. 😃👍🏻👌🏻
Brilliant thanks for your time and knowledge
Thanks for the interest ☺️
Great Video, excellent explantations! So the Car Batteries could be reused for Home Storage…Where did buy this big battery? Ist it possible to use Batteries from other cars. Do they have a similar protcol? Thanks a lot!
Thank you 🙏
Yes check out the links in the description. Those links leads to the developer of the code I use.
Awesome videos! What's your primary source of generating electricity during winter time? I'm in the Nordics myself (Norway)
Thank you ☺️ Night time from grid, and sometimes I sell some back depending on the price difference.
Nice work. Do you have a link to that 12v battery? I am looking for something which acts like a UPS on 12V
Hi! Thank you. Here is a video about it and you will find a link in that video description.
Thanks for the interest ☺️
@@flyingtools I think the link to the video got lost in your response.
We try again ☺️.
I bought a 12V Mini Ups for routers, raspberry pi, odroids micro computers and more.
ua-cam.com/video/dMKvZvKcBJ4/v-deo.html
Great work! Maybee use another inverter to test? 🇸🇪😊
Thanks.
That would be waste of money if I don’t plan to use it my self. I do not need another one at the moment.
Do you have any Heating for those LFP's? 🤔
Absolutely. You will have a glans of it in this short trailer video:
My new solar / grid storage battery is now being tested.
ua-cam.com/video/xSeVRhE7kKk/v-deo.html
@flyingtools Ah okay, nice ... is this normal 230V flloor heating? There are also infarot versions, I don't know if they have any advantages. Which price did you paid? I stick to "normal" LFP cells, I paid 47€ per 1kWh.
Do you know if it’s possible to do this with a G3 solax inverter? Thank you!
Hi, yes, I friend of mine uses one of that model.
Please tell us where to buy cheap 2nd hand batteries as you have🙏👍
Bildelsbasen.se. Köper de flesta i Norge.