Thank you very much! My grandfather used to quickly go make roses for my grandma on the days he had forgotten her birthday. My girlfriend loves tulips so I think this will be a very sentimental piece for the both of us.
I don’t know if you ever check these but I am just getting started blacksmithing and you are so inspiring. I am 16 and have no talent drawing. If you could, would you please put up a template for the petals? I love all of your videos, keep ‘em coming!
Roy, I hope you have a better standard to metric converter now, 1/2" is very close to 13mm rather than the 12mm. Think wrenches and sockets, makes it easier for anything under an inch for conversion.
Great project. Going to try it, but Paint? Bees wax maybe? Do the plasma cut edges take care of them selves or do you do a little tapering of the edges with a hammer to thin?
Gabriele Magnabosco Very pour choice of words that subject has torn mine and many families apart !!!! The work and goodness this channel brings is what is more needed !!!!!!!!!!!!!!!!! ✝ PS sorry for the negativity
Gabriele Magnabosco Thank you for your apology didn't mean to go off , you didn't know of course just hit close to home. I tend to protect good things these days sometimes not always right way forgive me and God bless you hope you have a great day✝
Hi, nice vid thanks. What do you mean by painting the tulip. Surley that means you wil be covering the metal and wont see the colouring you have added. Obviously your not doing that. How are you treating it? thanks.
Roy, would you mind sharing your source for the tulip blanks? I've looked around and have found several vendors offering blanks for other flowers but not tulips. Thanks.
I checked out the links that you provided, I can not find the one for the tulip. Could you provide some clarification on this? Of provide the measurements of the one you use? ( diameter and maybe petal tip width)
Christ Centered Ironworks aye you got my name right and I received that leaf it's awesome I commented on it in a previous video but you never responded but I know your a busy man so I'll forgive you
+BTB Presents well thank you for your forgiveness! :-) yeah I've been extremely busy here lately but haven't been getting back to a lot of people's comments just hang in there with me though thank you
wonderful result, but i feel very frustrated as we cant see a thing of your hand expertise as the video go much too fast. too bad. hopefully you may slow down the next one, and yes cut some part to keep a 6-7mn video. All the best.
Thank you very much! My grandfather used to quickly go make roses for my grandma on the days he had forgotten her birthday. My girlfriend loves tulips so I think this will be a very sentimental piece for the both of us.
God bless you too, my friend. You’re doing a great service to the blacksmithing community on UA-cam. Keep up the great work!
Super! Thank you very much for this video, really appreciate it!
Great. Thank you for using millimeter as well👍👍👍
Very nicely done, brother!
I don’t know if you ever check these but I am just getting started blacksmithing and you are so inspiring. I am 16 and have no talent drawing. If you could, would you please put up a template for the petals? I love all of your videos, keep ‘em coming!
This is beautiful! I know what ill be practising till christmas...
Nice one
Very nice alternative to the steel rose.
We have tons of forged flower tutorials, see our playlists! ~Jessica at Christ Centered Ironworks
Thanks for sharing your knowledge!
Nice work as always. Thank you for all the videos you put out they are very helpful
hi Roy, You said paint and it will bring out the brass highlights. did you mean clear coat?
Love your work Brother
Beautiful work Roy as always.
Thanks! Glad to have you on the live stream last night too :)
Another super fantastic video. Thank you.
Thats NICE Roy
Thank you
Amazing work of art... wow!!!
Great vlog as always sir.. the forge weld we talked about the other day was a success.. yeah.. keep making them and I'll keep watching.. thanks.😎
Great work roy
Thanks John :)
I watched you start to put the flower on the stem backwards, you must have heard me yelling at you! 😁
Wow that’s cool!
Thanks Rexarthur Ramos!
Roy, great job. I want to try one of these for a anniversary gift next month. Could you post a PDF template or pattern for the tulip?
Saw this video a while back but just finally remembered to go back and watch it. Really cool project! Love it! Thanks Roy!
I would like to see the shaping of the rose a little slower but never mind, it was just a bit hard to follow. Lovely job mate.
Roy, I hope you have a better standard to metric converter now, 1/2" is very close to 13mm rather than the 12mm. Think wrenches and sockets, makes it easier for anything under an inch for conversion.
Not bad for a Buckeye!
Nice flower
Do these attract the sales such as the multi petal roses? Looks like these are faster to make.
Hermoso trabajo
Linda rosa. Parabéns.
I was surprised you didn't texture with your stump! Looked good from here anyway. Thank you for another good video!
Nice Roy, love it. What do you use for your video editing?
Great project. Going to try it, but Paint? Bees wax maybe? Do the plasma cut edges take care of them selves or do you do a little tapering of the edges with a hammer to thin?
cool👍
Do you ever sleep beautiful as always & thank you for your hard work and time God bless keep the fires burning✝✝✝
F F C Rick “Do you ever sleep” is a great question. Seems like every time I check my UA-cam he’s got a new video out. I don’t know how he does it. 👍
crystal meth I suppose
Gabriele Magnabosco Very pour choice of words that subject has torn mine and many families apart !!!! The work and goodness this channel brings is what is more needed !!!!!!!!!!!!!!!!! ✝ PS sorry for the negativity
Couldn't possibly know about that. I'm sincerely sorry, my dark humor isn't always the best...
Gabriele Magnabosco Thank you for your apology didn't mean to go off , you didn't know of course just hit close to home. I tend to protect good things these days sometimes not always right way forgive me and God bless you hope you have a great day✝
Hi, nice vid thanks. What do you mean by painting the tulip. Surley that means you wil be covering the metal and wont see the colouring you have added. Obviously your not doing that. How are you treating it? thanks.
Hey Roy, what do you paint it with? Clear coat right?
Roy, would you mind sharing your source for the tulip blanks? I've looked around and have found several vendors offering blanks for other flowers but not tulips. Thanks.
What kind of paint do you use,
Hey man! Where did ya get that template for the tulip???
I checked out the links that you provided, I can not find the one for the tulip. Could you provide some clarification on this? Of provide the measurements of the one you use? ( diameter and maybe petal tip width)
Well that's purdy
+BTB Presents thanks Boedie !
Christ Centered Ironworks aye you got my name right and I received that leaf it's awesome I commented on it in a previous video but you never responded but I know your a busy man so I'll forgive you
+BTB Presents well thank you for your forgiveness! :-) yeah I've been extremely busy here lately but haven't been getting back to a lot of people's comments just hang in there with me though thank you
Christ Centered Ironworks no problem 😀👍
+BTB Presents God bless you buddy . I'm glad you enjoyed the key chain
Do you sell the flowers?
Alguna forma para poder comprarte ese tulipan porfabor ?
Where can I find a template for something like this
do you have any templates i can print out for cutting?
We do! Check out our "all templates bundle" at our page www.blacksmithpdfs.com under our "digital downloads" section.
Can u do the full in real time I like to be able to see each step this one was to fast
Go to the video setting and there is a setting called playback speed. set it to .25 or .5 to slow the video down
Were did you get the template?
I bought it, Daniel. Link should be in the description.
wonderful result, but i feel very frustrated as we cant see a thing of your hand expertise as the video go much too fast. too bad. hopefully you may slow down the next one, and yes cut some part to keep a 6-7mn video. All the best.
why the speed up ? couldnt see what you did actually a waste of time watching
Thats not blacksmithing thats fabrication
Might want to look that up in the dictionary before commenting...
@@ChristCenteredIronworks hahaha..... some people