Deeeaam why so much adhesive for the battery that's not going anywhere already? Great explanation on all the contacts and wires. But what is 2:31 & 5:15 that wire for? antennae or charging, or what? How did you test the camera mechanism like that? 7:22
Nice tedious work man 👍 really good I respect your passion. I have one doubt you may see this fusion plus pcb is small and components are less as compared to samsung m51 which has same chipset. What do you think about this?
Thank you. I think it would come down to each companies engineering and phone features, and how they make use of the features or engineer the components on the board to work with one another etc. I don't know all that much about electrical engineering etc. to be able to give actual facts, but just stating my opinion :) .
It runs around $20 or so for the bottom 3 lens cover but cant find one for the top. Here is a link www.ebay.com/itm/For-Motorola-One-Fusion-OEM-Replacement-Rear-Glass-Camera-Lens/184429825409?hash=item2af0dfcd81:g:niUAAOSwDO5fT92c
hello I'm writing to you because now I'm desperate I replaced the display of a motorola one fusion plus and since I replaced it the front camera stopped working it doesn't even come out of the display I saw that you at the end of the video before closing everything did you try the front camera popup motor manually can I ask you how you did it if you could tell me I would be very grateful
Hi, I was using my other hand to open and close it while the phone was on from the other side. Check and make sure the cable for the camera is not damaged and connected properly, and that its seated in place properly.
ha . ok too bad because it seemed like maybe there was a way to try and see if the pop-up motor was faulty but from what you wrote to me it seems that unfortunately you can't try it in the meantime thank you very much for your kindness and your courtesy and if you can think of a way to help me I ask you if you can tell me thank you very much again
I don't know if you are replacing parts or not by selfie cam is broke and I was wondering if you know where to order parts? I can take my entire phone apart without having to open this video, thank you for it btw! But yeah parts are so hard to find for this phone
Hi, here is a link to the original parts. If there is any part not in stock, just click on notify and they will email you when they restock it: www.mobiledefenders.com/motorola-repair-parts/other-motorola/fusion-xt2067-2.html
I have the same phone but I've been facing trouble with pop up camera whenever I open front camera the app closes and camera goes back in immediately can u help
Hi dust has accumulated in the ultrawide camera, the photos r blurred, should I give for warranty, is it repairable, pls reply and do u need to remove a screen protector for repairing or it can be done without removing
Hi, its easy to take the back housing off and then remove the screws on the top white plastic cover so you can remove that and use a brush to clean out the dust. If you follow the video you should be able to do it. If you don't feel comfortable doing it, I'm sure you can send it in for warranty. Not sure what you mean for screen protector, since that is in the front not the back. If you mean do you need to remove it before sending the phone in, not sure.
@@PBKreviews tq for the reply❤️ , I have a tempered glass put on which is quite costly I m scared if they remove it in the service centre😅, tq very much fr ur reply I , I have subcribed to ur channel tq
@@PBKreviews Man. I tried to replacement the display, but when I remove the flex power button cable. I teer off the cable from the plate and stayed on base. In between is pink paste. And now I can't turn on the phone. I can't get a flex cable in Europe. Can I fix it?
@@H.a.l.l.d.a im not behind the computer at the moment to check, but try looking on www.mobiledefenders.com they should have some parts for that phone there. If not, try searching motorola one fusion plus power button flex cable on ebay or google to see if you come up with any results
@@PBKreviews ok ok. I repair the cabel with metal sticker and work it. :D but when i power on. Speaker and microfone don't work it :( You don't know why? Thanks
Hello. I have motorola one fusion plus. But it got short by one shorted aux cable. And now my IC chip is short also. I can't find it anywhere. They are suggesting me to change whole motherboard and it costs so much. How can I find IC chipset that work on this model.? Can you help about it?
check if the headphone jack is working or not. If not make sure the flex cable that connects that bottom sub board to the main board is connected on both ends properly. Also make sure that cables is not torn or damaged.
@@theradost Oh, have you tried taking it apart and putting it back together to make sure possible the battery connector is not in place correctly or other cables etc.? And ya replacement parts don't seem to be available yet. You can also try sending it in to motorola to repair but not sure what they will charge.
I bought a phone (motorola one fusion plus) from Flipkart during the Big Billion days. Initially, the phone seemed fine, although there were some minor scratches. However, on the 11th day of receiving the phone, the screen cracked by itself. It didn't fall down neither did it hit any hard surface, the phone was just kept on the table and the crack appeared. The phone definitely had some manufacturing defect, but because there's external damage on the screen Motorola won't cover it in it's warranty policy and neither is Flipkart providing me any option to solve the problem. This shouldn't had happened.
Hmm that's odd. They shouldn't break like that, might have had a hairline crack from shipping or something and then it grew or got bigger later. Sorry to hear about that issue. I guess at this point you have no choice but to replace the screen eventually.
The camera glass are held on with adhesive. You can heat it up and pry it off to replace. Here is a link to the replacement parts for the phone: www.mobiledefenders.com/motorola-repair-parts/other-motorola/fusion-xt2067-2.html
Here is a picture. It would probably be those 2 I circled or one of the other 2 circle points on the board. Not exactly sure but I would probably lean more toward the 2 I circled. ibb.co/Zfj9Xth
Watching this teardown on my Motorola one fusion plus.
Same here
Deeeaam why so much adhesive for the battery that's not going anywhere already? Great explanation on all the contacts and wires. But what is 2:31 & 5:15 that wire for? antennae or charging, or what? How did you test the camera mechanism like that? 7:22
Was waiting for this video from you Thank you )
You're welcome
Please tell me how u test pop up camera at 7:22 ? do I need to push something there? thanks
on the other side of the screen I was pressing the camera button when the phone was powered to test the mechanism.
Nice video big 👍 for this tear down and please tear down moto one fusion
Thanks!
@@PBKreviews welcome and please tear down one fusion
My first cellphone was a Motorola and had this color motorola c150t and it still works but the charger is broken
This one is exceptionally easy to repair!
BTW, Moto G 5G Plus is coming to US
Nice, I will keep an eye out for it.
sir my charging plate damage i want repair it
Love from India
Thank you, appreciate it :)
I enjoyed your video
Glad you enjoyed it! :)
Nice tedious work man 👍 really good I respect your passion.
I have one doubt you may see this fusion plus pcb is small and components are less as compared to samsung m51 which has same chipset.
What do you think about this?
Thank you. I think it would come down to each companies engineering and phone features, and how they make use of the features or engineer the components on the board to work with one another etc. I don't know all that much about electrical engineering etc. to be able to give actual facts, but just stating my opinion :) .
Muchas gracias me sirvió muchísimo para cambiar la pantalla de mi celular
You're welcome :)
Sir my rear camera glass has been broken so I've to replace it and how much it cost around?
It runs around $20 or so for the bottom 3 lens cover but cant find one for the top. Here is a link www.ebay.com/itm/For-Motorola-One-Fusion-OEM-Replacement-Rear-Glass-Camera-Lens/184429825409?hash=item2af0dfcd81:g:niUAAOSwDO5fT92c
Same problem.. Please help
@@festiveSantipur897 Link for one on ebay is posted as a reply to previous comment
very thanks this is es good😎😎🎩🎩
hello I'm writing to you because now I'm desperate I replaced the display of a motorola one fusion plus and since I replaced it the front camera stopped working it doesn't even come out of the display I saw that you at the end of the video before closing everything did you try the front camera popup motor manually can I ask you how you did it if you could tell me I would be very grateful
Hi, I was using my other hand to open and close it while the phone was on from the other side. Check and make sure the cable for the camera is not damaged and connected properly, and that its seated in place properly.
ha . ok too bad because it seemed like maybe there was a way to try and see if the pop-up motor was faulty but from what you wrote to me it seems that unfortunately you can't try it in the meantime thank you very much for your kindness and your courtesy and if you can think of a way to help me I ask you if you can tell me thank you very much again
I don't know if you are replacing parts or not by selfie cam is broke and I was wondering if you know where to order parts? I can take my entire phone apart without having to open this video, thank you for it btw! But yeah parts are so hard to find for this phone
Hi, here is a link to the original parts. If there is any part not in stock, just click on notify and they will email you when they restock it: www.mobiledefenders.com/motorola-repair-parts/other-motorola/fusion-xt2067-2.html
Motorola one fusion plus is Chinese company??
I have the same phone but I've been facing trouble with pop up camera whenever I open front camera the app closes and camera goes back in immediately can u help
Hi dust has accumulated in the ultrawide camera, the photos r blurred, should I give for warranty, is it repairable, pls reply and do u need to remove a screen protector for repairing or it can be done without removing
Hi, its easy to take the back housing off and then remove the screws on the top white plastic cover so you can remove that and use a brush to clean out the dust. If you follow the video you should be able to do it. If you don't feel comfortable doing it, I'm sure you can send it in for warranty. Not sure what you mean for screen protector, since that is in the front not the back. If you mean do you need to remove it before sending the phone in, not sure.
@@PBKreviews tq for the reply❤️ , I have a tempered glass put on which is quite costly I m scared if they remove it in the service centre😅, tq very much fr ur reply I , I have subcribed to ur channel tq
@@adithyang6672 you're welcome, thanks for the support :)
What size screwdrivers did you use?
I believe its a PH00 but usually most smartphone sized Philips screw drivers should do the job.
@@PBKreviews Man. I tried to replacement the display, but when I remove the flex power button cable. I teer off the cable from the plate and stayed on base. In between is pink paste. And now I can't turn on the phone. I can't get a flex cable in Europe. Can I fix it?
@@H.a.l.l.d.a im not behind the computer at the moment to check, but try looking on www.mobiledefenders.com they should have some parts for that phone there. If not, try searching motorola one fusion plus power button flex cable on ebay or google to see if you come up with any results
@@PBKreviews ok ok. I repair the cabel with metal sticker and work it. :D but when i power on. Speaker and microfone don't work it :( You don't know why? Thanks
We have all spare parts (original) for this model
Hello. I have motorola one fusion plus. But it got short by one shorted aux cable. And now my IC chip is short also. I can't find it anywhere. They are suggesting me to change whole motherboard and it costs so much. How can I find IC chipset that work on this model.?
Can you help about it?
hi, i have no idea where to find IC chips.
Very helpful video. Unfortunately after my teardown phone was working fine but not charging battery at all. Do you know what might be a reason?
check if the headphone jack is working or not. If not make sure the flex cable that connects that bottom sub board to the main board is connected on both ends properly. Also make sure that cables is not torn or damaged.
@@PBKreviews battery is dead and I am not able to check that. Also I couldn’t find any shop selling parts to this phone.
@@theradost Oh, have you tried taking it apart and putting it back together to make sure possible the battery connector is not in place correctly or other cables etc.? And ya replacement parts don't seem to be available yet. You can also try sending it in to motorola to repair but not sure what they will charge.
@@theradost Hi, we can offer you all Original Motorola spare parts
Buen día, sabrás hacerle un testpoint a este equipo, para ponerlo en modo edl.
Hi, I'm not sure.
My motorola 1 fusion+ tach and folder broken how we chenge it.
I'm not sure what tach and folder is
Thxs sir
You're welcome
Nice
Thanks
Nice video!
Thank you
Yo viendolo desde México 👋 pero aquí hablanen inglés yo.
Vale queso, tantas cosas importantes y yo no entiendo ni pio
Nice
Básicamente dice que hagas todo con cuidado y que calientes la pantalla antes de quitar la pila para despegar el adesivo.
Pop up camera slider available ??
Here is a link to the original parts: www.mobiledefenders.com/motorola-repair-parts/other-motorola/fusion-xt2067-2.html
Watched it on my fusion+
Nice!
@@PBKreviews one month later: still loving this phone, very solid , great display, great speakers, great performance, I just love this device ❤️❤️
I thought it has 10 cameras, kind of disappointed
My Motorola One Fusion Plus Mobile Power Ic Problem
You Repair or Provide Ic
Please Provide Ic Numbers or Ic Detail Etc
I don't have the phone anymore sorry
I need moto one fusion plus front camera
I bought a phone (motorola one fusion plus) from Flipkart during the Big Billion days.
Initially, the phone seemed fine, although there were some minor scratches. However, on the 11th day of receiving the phone, the screen cracked by itself. It didn't fall down neither did it hit any hard surface, the phone was just kept on the table and the crack appeared.
The phone definitely had some manufacturing defect, but because there's external damage on the screen Motorola won't cover it in it's warranty policy and neither is Flipkart providing me any option to solve the problem. This shouldn't had happened.
Hmm that's odd. They shouldn't break like that, might have had a hairline crack from shipping or something and then it grew or got bigger later. Sorry to hear about that issue. I guess at this point you have no choice but to replace the screen eventually.
@@PBKreviews yeah let's see what takes me where. Eventually its a fraudery.
@@Bishal_Goswami yep
Back camera glass change kaise kore video chaiye
The camera glass are held on with adhesive. You can heat it up and pry it off to replace. Here is a link to the replacement parts for the phone: www.mobiledefenders.com/motorola-repair-parts/other-motorola/fusion-xt2067-2.html
Sir Which Power IC is used in it ???
Hi, I'm not sure. I'm not too familiar with the electrical engineering
where is edl point
Here is a picture. It would probably be those 2 I circled or one of the other 2 circle points on the board. Not exactly sure but I would probably lean more toward the 2 I circled. ibb.co/Zfj9Xth
@@PBKreviews thnx
@@vishal-ik5cd you're welcome
Drop test of p40 lite
Camra hai
i need moto one fusion plus front camera
i need moto one fusion front camera
You can check this website, but not sure if they have the front available. www.mobilesentrix.com/replacement-parts/motorola/one-series/one-fusion-plus
@@PBKreviews, not available,i check
@@PBKreviews ,any more option