Thank you! You literally saved me thousands of dollars! The shop I went to wanted $2k to fix my AC. I went online and found the part for $25. Thanks to your video I was able to fix it myself. You are an angel! I simply cannot thank you enough.
Thanks for the video I had to replace the part again after a few years. And your video clued me into the fact that I put the wrong part for the flap. I put in the adjustment valve. It worked fine. And now it's making a lot of noise, so I have to replace it. But I guess I put the wrong one in last time. Thanks again.
Don't throw away your OEM. It might be just the gear that's torn so I replaced my OEM gears with aftermarket and kept everything else OEM. Greased and works great
Thank you for your video. It was very helpful! Especially the details when reinstalling the part. The screws are a real pain. My neighbor loaned me a set of angled screwdriver and that helped a great deal.
Thank you, Your video gives so much more information than the others. Now I have a good idea of where to look in my 2002 Lexus. The mode is not working. It stopped on a long trip. But, $200 sounds like a lot for that part. I think I got a blend door actuator for my 2009 Ford Ranger for less than $20. But, now it is back out to the driveway.
Buen día amigo saludos. muy bueno tu video explicativo. Te comento, tengo una camioneta igual a esa y del mismo año. en mi caso particular me ocurre que del lado del copiloto no enfría lo suficiente y del lado del chofer si enfría. Con el scaner indica lo siguiente: - Circuito del sensor solar (Lado Pasajero) - Circuito del sensor de posición del amortiguador de mezcla de aire (Lado Pasajero) Mi pregunta es la siguiente; Tendrá algo que ver ese actuador con mi caso, para proceder a revisar. te escribo desde venezuela.
Both these computer modules are functioning properly.. my clutch an everything is kicking over for my AC.. but my heat/AC will not come through my vents.. both heater Hoses are warm so no clog... not sure about next diagnosis
Check to make sure if coolant is enough in the system (water pump and thermostat should circulate cooling system around). Both heater core lines should be hot not slightly warm to get normal heat like it should. If there no heat or a/c air coming out of the vents, check the hot/cold blend door motor to see if it works properly. If you know for sure the blend door motor is working, then the a/c control unit could be bad. 1 - check coolant system 2 - check blend door motors 3 - check heater and a/c control unit
Both the lines are really hot, I believe there is no clog as my AC was working perfectly fine an then one day it decided not to put any air out of my vents.
I think you're spot on. I believe the blower motor has gone bad. I hear no fan-like sound underneath my dash as I turn the air/heat/ac on. So with that being said as that is probably the reason why there is no air output through my vents.
Replaced the blower motor an both computer modules for the climate control etc are working properly. Still no air. Not exacly sure what's going on as I'm not no goof when it comes to the automotive field as I'm putting together a 10k NA K series
Im not sure if the part is the same but you can double check it with the dealership for the part #. Or you can open up both side and see if the part matches.
If blower motor fan don't work, check the fuse, blower motor could be bad, the blower motor itself is bad. Check the fuse for power and test the blower motor if you know how.
@@Ah_Duuu_Ma also the compressor work for about 5 secods then stops and thst is when the ac light starts blinding. Any other solution to this? Thanks before hand for your help.
Thank you! You literally saved me thousands of dollars! The shop I went to wanted $2k to fix my AC. I went online and found the part for $25. Thanks to your video I was able to fix it myself. You are an angel! I simply cannot thank you enough.
Where did you find the parts? Tnx.
Rock Auto- 30 bucks!!
Thanks for the video I had to replace the part again after a few years. And your video clued me into the fact that I put the wrong part for the flap. I put in the adjustment valve. It worked fine. And now it's making a lot of noise, so I have to replace it. But I guess I put the wrong one in last time. Thanks again.
Appreciate you showing the part number. Good vid.
This is the best video of demonstration I’ve seen, 👍
This is a great video very informative clear concise thank you for this mayne!
Don't throw away your OEM. It might be just the gear that's torn so I replaced my OEM gears with aftermarket and kept everything else OEM. Greased and works great
Great, and straight to the solition
Howdy from Newport Beach California….beast Tiger 🐅 My RX 300 doing the same thing…thank you bud…thank you for your awesome video…👍
Freaking awesome! Thanks!
awesome this helped me a lot!!! Excellent job!!
Thank you! Very useful video!
thank you for you video it helped me to fix my ac .
Great video
Thank you for your video. It was very helpful! Especially the details when reinstalling the part. The screws are a real pain. My neighbor loaned me a set of angled screwdriver and that helped a great deal.
thank you amigo, you made my day
Thank you so much. This worked for me
Thank you!
Good job you helped a lot
So helpful. Thanks
In this Lexus 300 what can stop the small screen on the radio side to stop showing
you have the part number for direction actuator? mine is not working from leg, to face,. Just stuck in one position
💯 thank you
Thank you, Your video gives so much more information than the others. Now I have a good idea of where to look in my 2002 Lexus. The mode is not working. It stopped on a long trip. But, $200 sounds like a lot for that part. I think I got a blend door actuator for my 2009 Ford Ranger for less than $20. But, now it is back out to the driveway.
Buen día amigo saludos.
muy bueno tu video explicativo. Te comento, tengo una camioneta igual a esa y del mismo año. en mi caso particular me ocurre que del lado del copiloto no enfría lo suficiente y del lado del chofer si enfría.
Con el scaner indica lo siguiente:
- Circuito del sensor solar (Lado Pasajero)
- Circuito del sensor de posición del amortiguador de mezcla de aire (Lado Pasajero)
Mi pregunta es la siguiente; Tendrá algo que ver ese actuador con mi caso, para proceder a revisar. te escribo desde venezuela.
Thanks it’s very good video thanks 🙏🌹
Very nice 🙏
Thanks good video
Both these computer modules are functioning properly.. my clutch an everything is kicking over for my AC.. but my heat/AC will not come through my vents.. both heater Hoses are warm so no clog... not sure about next diagnosis
Check to make sure if coolant is enough in the system (water pump and thermostat should circulate cooling system around). Both heater core lines should be hot not slightly warm to get normal heat like it should.
If there no heat or a/c air coming out of the vents, check the hot/cold blend door motor to see if it works properly. If you know for sure the blend door motor is working, then the a/c control unit could be bad.
1 - check coolant system
2 - check blend door motors
3 - check heater and a/c control unit
Both the lines are really hot, I believe there is no clog as my AC was working perfectly fine an then one day it decided not to put any air out of my vents.
@@irundstreets7126 If there's no air coming out the vents, then your blower motor could be going bad soon.
I think you're spot on. I believe the blower motor has gone bad. I hear no fan-like sound underneath my dash as I turn the air/heat/ac on. So with that being said as that is probably the reason why there is no air output through my vents.
Replaced the blower motor an both computer modules for the climate control etc are working properly. Still no air. Not exacly sure what's going on as I'm not no goof when it comes to the automotive field as I'm putting together a 10k NA K series
I'm mode actuator will go to three of the four modes. It gets stuck in face mode. I don't know why. 😢 help
Then replace the mode blend door actuator.
Would this be the same part to fix no warm air only on one side ( drivers side cool, all other vents warm on higher temp settings)?
Im not sure if the part is the same but you can double check it with the dealership for the part #. Or you can open up both side and see if the part matches.
7:08 howd you remove the air bag connector from the bracket
Press the 2 black tabs outward.
On my 99 lexus the fan doesn’t come on at all. Any suggestions?
If blower motor fan don't work, check the fuse, blower motor could be bad, the blower motor itself is bad. Check the fuse for power and test the blower motor if you know how.
How can I rig it till I can get it fixed
Were are you located, I am in Washington DC can you fix mine. How much would you charge?
Im in Cali. This job would cost roughly around $300.
@@Ah_Duuu_Ma Damn wish there was someone in the DMV who could fix this problem at that price, I will keep looking thanks anyway.
My AC light blinks and does not blow cold air. Any help with that?
Either elecrical wires having intermitten problem or ac compressor.
@@Ah_Duuu_Ma also the compressor work for about 5 secods then stops and thst is when the ac light starts blinding. Any other solution to this? Thanks before hand for your help.
Is the same thing for a 99
.. only blows hot air but DOES NOT switch from modes.. could it be the same parts?
Slighty dif but the part should be the same location.
Hi
Great video
Thank you 🎉