I took an hvac class, and after teaching us how vacuum recovery works, the teacher said "now you definitely can't just use all these techniques and equipment to service your car, thats clearly totally different"
Is it true objects like screws or pencil rolling down the dash and falling through the defroster vent under the windshield can wedge a moving part and then break the actuator that way?
Awesome video so brilliantly explained👌👍 I wonder what is the cause of heating not responding to the command and if you leave it on while driving, it comes on , on it's own accord 🤔 sometimes 15mn or 1hr or not coming on at all during that trip🥶. Also during the summer time, with the heating off , you can feel some warm air coming through the vents 🥵 so so annoying 😑 and yes I almost forgot , the vehicle is Citroen C4. Many thanks 😊 🙏
I've got hot and cool air, and flow from both the dash vents and uper vents but I have no flow from the floor vents when I select the floor vent. after watching I still can't tell if that's an acuator problem or a door problem
Shoot hoping to not have to remove assembly. Heater not responding. Flushed core and replaced HW valve, no go. Blend door actuator is stuffed behind assembly and inside firewall. Have to remove everything just to look at possible core air passage blockage (blower cage was full of leaves) or if door is stuck. Can't get to door fulcrum without removing whole unit. I wonder how common it is to have to do that. I will definitely examine core and evaporator for possible replacement.
Convenient video - I got an 05 4runner with four vents going across the dash. The two vents near the center of the dash do not blow heat/AC at all but the outer vents near the doors work perfectly…any thoughts?
Help! i have heat on my 95 Civic but when the vent is set to cold fresh air it is not cool, I can still feel some heat. What should I look at to fix this?
I have a 2010 Ford Edge Limited with a bad driver side Blend Door Actuator. The climate control actuator is near the driver's gas pedal, and of course the passenger's side actuator is behind the glove box. This vehicle does have dual zone. My issue is where is the Driver's Side Blend Door Actuator located at? TY!
Is your exhaust system clogged? I know 100% one of those is odorless. I'd have the exhaust system checked. I had a customer that had that problem but didn't mention the odor coming through his vents. Hope this helps.
+haleem khan We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
2004 hummer H2 all the sudden freezing cold AC full bore, cant control air flow, cant change temp, coming out of defrost and not vents, HAVE MERCY, any body got ideas ? blend doors?
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
I took an hvac class, and after teaching us how vacuum recovery works, the teacher said "now you definitely can't just use all these techniques and equipment to service your car, thats clearly totally different"
Great video! Very informative and easy to understand!
Great video thanks. If there is hot air coming out one side and cold air the other - could that be the acuator?
Is it true objects like screws or pencil rolling down the dash and falling through the defroster vent under the windshield can wedge a moving part and then break the actuator that way?
Very good and simplest way to describe. The long process in a very short way
Awesome video so brilliantly explained👌👍
I wonder what is the cause of heating not responding to the command and if you leave it on while driving, it comes on , on it's own accord 🤔 sometimes 15mn or 1hr or not coming on at all during that trip🥶. Also during the summer time, with the heating off , you can feel some warm air coming through the vents 🥵 so so annoying 😑 and yes I almost forgot , the vehicle is Citroen C4. Many thanks 😊 🙏
I've got hot and cool air, and flow from both the dash vents and uper vents but I have no flow from the floor vents when I select the floor vent. after watching I still can't tell if that's an acuator problem or a door problem
Wow What professionals, greetings from Cholula, Mexico
Shoot hoping to not have to remove assembly. Heater not responding. Flushed core and replaced HW valve, no go. Blend door actuator is stuffed behind assembly and inside firewall. Have to remove everything just to look at possible core air passage blockage (blower cage was full of leaves) or if door is stuck. Can't get to door fulcrum without removing whole unit. I wonder how common it is to have to do that. I will definitely examine core and evaporator for possible replacement.
Mahalo 🤙🏽 Awesome tutorial! Very informative.
Convenient video - I got an 05 4runner with four vents going across the dash. The two vents near the center of the dash do not blow heat/AC at all but the outer vents near the doors work perfectly…any thoughts?
Help! i have heat on my 95 Civic but when the vent is set to cold fresh air it is not cool, I can still feel some heat. What should I look at to fix this?
Very helpful video, thank you.
Is the recirculation mode button connected to the blend door actuator too? Or is that controlled by another actuator somewhere else?
Both bottom and flapper do or of mine are good and so is my Freon what else could I try it’s a 2008 Chevy avalanche
Very useful ❤
I have a 2010 Ford Edge Limited with a bad driver side Blend Door Actuator. The climate control actuator is near the driver's gas pedal, and of course the passenger's side actuator is behind the glove box. This vehicle does have dual zone. My issue is where is the Driver's Side Blend Door Actuator located at? TY!
One of the better ones👍
Thank You. Paul
Do u have a video for a 2004 accord?
I got a '05 Tahoe and I don't get heat on my feet. Where's the actuator for that on the vehicle and how do I replace it?
SMH it so hard to find the blend door online because it automatically assumes actuator
Been looking for this
There's a distinct smell after running the heater,I checked both air filters what else can I do🤔.
It smells like carbon dioxide monoxide of the two.
Is your exhaust system clogged?
I know 100% one of those is odorless.
I'd have the exhaust system checked. I had a customer that had that problem but didn't mention the odor coming through his vents.
Hope this helps.
Teach me how to take the dashboard out
Is my truck needs it bad
Trashed a Pontiac torrent for this bad design reason. Blend door stuck open + Canadian winter
Blend door open actuator good blower motor good but blown ac cold air .what should be problem
+haleem khan We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Can I replace water pump without removing engine parts
My Chevy Impala knows all about this
Why does my blend door motor just keep trying to turn all the time
How to fix your heat in truck
Cool.
Couldn’t it be a bad climate control head how do you check that when you go from cold to hot that it’s actually doing what it’s supposed to do?
It wants to stay on hot all the time
👍👊🇺🇲
BS
😊❤❤❤😊q
2004 hummer H2 all the sudden freezing cold AC full bore, cant control air flow, cant change temp, coming out of defrost and not vents, HAVE MERCY, any body got ideas ? blend doors?