Це відео не доступне.
Перепрошуємо.
Assembling IKEA - RENGORA + NYTTIG + FIXA - Integrated dishwasher + Floor protection + Vapor barrier
Вставка
- Опубліковано 17 сер 2023
- Sink and water trap install: • Assembling IKEA - LANG...
Kitchen cabinets install: • Assembling IKEA furnit...
Rest of my Ikea videos: • IKEA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
THANK YOU FOR WATCHING!
PLEASE LIKE AND SUBSCRIBE!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for posting this video. It was very helpful.
Welcome!
Great video, 😅m fitting exactly the same dishwasher into the kitchen at present. If it’s any consolation I also tried to take out the plastic latch 🤦🏻. I also manually moved the rear foot down and now I see your video I see that the screw at the front should have been used.
Haha, I feel less bad now 😄
Do you know if the rengora is using fixed or sliding hinges? Did you have to cut the plinth?
Hi. When assembling the door: what do the two pictures in the middle of the drawing mean? What distinguishes «1» and «2», and why are the screwing holes differently placed? Great tutorial!
Hi. I think those are different types of doors.
Or maybe I'm looking at the wrong moment in the video.
Yeah it’s about the door type. I have bought a custom door, but I’m unsure which door type instruction to follow. Does the (1)- drawing mean that the door has thicker edges perhaps? It’s around 9:00
@SrgntLoveGaming yes, most likely.
Would you recommend installing the dishwasher before or after putting on the countertop?
If I remember right I put it before, but still needed to adjust the height to touch the countertop.
Hola, una pregunta, ese dishwasher no ocupa una salida para el vapor?
Hello. Steam outlet? No. It does not gave such a thing.
Hi! Where did you buy the vapour barrier, see through one?
Hi. That one is included.
Did you just put liquid cleaner in the smaller compartrment?
Men, it feels like I've never properly used a dishwasher before
That is rinse aid liquid.
Im trying to find a solution for my door but it doesnt seem like you have the same problem as me.
When i put the font on it matches the top part of the machine but i am only able to open the door about an angle of 30 before it hits the machine instead of the full 90. Its really annoying
Front is suposed to slide up while you are opening the door. Maybe you are not attaching it right.
I also removed the latch but now I have no clue on how to put it back 😅 any tips on how you did it?
With great effort. Push it back in place, but it will scrape some of the plastic from it. So it's not a good idea to get it out like we did 😵💫
Hi!
I have a problem with the ikea rengora dishwasher. The part at 11:46
My door slides in but there is nothing to screw the part into?
Was there somthing to screw into on yours? I can not see not screw thread on mine. Thanks
Hi. Yes, as far as I remember and can also see in the video there is a thread there.
@UltimateDIY there is definitely a manufacturing fault on mine then as I have no thread, is there a way I could send you some photos?
Maybe upload them and put a link here. But I installed this about 2 years ago, so I could make a mistake and give wrong advice. Your best chance would be to get in direct contact with Ikea to be 100% sure.
@UltimateDIY thanks for the replies really appreciated, I have emailed the Ikea team. I'm hoping they can confirm there is an issue with it. If I have anymore issue I'll post a link on here if needed but for now, thanks
Hope you get it figured out 👍🏻
How the door will open automatically?
I show that in the video. It has a plastic rod that pushes it out, when the program is finished, making it pop out.
this is totally a Whirlpool. it's weird that doesn't say anywhere
Yes! I was told off the record by an Ikea employee that many kitchen products are Whirlpools.
Electrical never mentioned.
True, but there was nothing to do. Take plug and insert in socket.
Wtf is dishwasher salt?
This: en.m.wikipedia.org/wiki/Dishwasher_salt