Thanks so much for this video! I legit just learned how to properly maintain, troubleshoot from Basic -> Step 1-> Step 2, and how much / long pumps should last and how to actually maintain them. I hope this video saves you guys so many headaches, I really think if people know this video is out there, they should ONLY contact you should all these problems not solve it.
I have a problem with my pump , turned it on one day and smelled something burning but still worked for a while then went out. Checked fuse and everything few days later found problem end up being the regulator. Great info
You have to be careful with that n o s cody because I did that inhabiting it back 30 plus years ago and it wasn't something I wanted to keep doing or I'd still be sitting on my sofa. 🤣🤣🤣 I crack myself up sometimes. Lol. You guys have done great things over the years and it is commendable. Great job Team! 👍
Appreciate your vid. Used advice to tighten my new everflo to fix leak and also your other video on adjusting the set screw for sweet spot. I referenced you and your helpful videos on my channel. Thank you once again.
Hey just a problem you guys forgot to include in your video(and for some reason none of these pressure washing channels ever seem to acknowledge.) is if your softwash pump loses flow or doesn't seem to have flow like the last time you used it, make sure to tighten the set screw on the front of the pump. That is definitely a constant issue you will run into at least from my experience.
1) I don’t forget anything 2) here’s where I “acknowledged” the setscrew four years ago in a video ua-cam.com/video/QKjh-xbsZUM/v-deo.htmlsi=0puX2VhKDmpRVFRn 3) you don’t just go to adjusting the pressure switch every time your pump acts weird
@@southeastsoftwash4020 1) umm yeah you kind of did, that's why that issue isn't in your video about fixing every possible issue with a soft wash pump 2) linking another video doesn't change the fact that you forgot to include that issue in this video 3) I never said to do that every time your pump doesn't work, just an issue that can come up 4) what's with the passive aggressiveness? not trying to make you look inadequate or anything, just pointing out that you along with alot of other channels don't ever mention this blatant issue with 12v soft wash pumps a whole lot. Not trying to hate
@@TheH2OPROExteriorCleaning Well, since I have actually invented my own series ofpumps, and am now a pump manufacturer, maybe we should let me be the expert on what is and is not appropriate to include. Adjusting the pressure set screw is not part of this video for a reason. Because it is not part of a troubleshooting procedure. You are adjusting a pressure setscrew, which is not the root cause of any problem. That initial adjustment should be done when you install the pump for the very first time, and you are tuning it to the appropriate flow for the outbound side of your plumbing set up. You should never touch that crew again, unless something changes on your hose/Gun/tip, etc. You are simply misdiagnosing symptoms. But since I’m an expert and you are not,you would not know that. why your channel go no vids? You seem like an expert at content creation. You really need to start posting content before you start criticizing. Go to hell
@@southeastsoftwash4020 That definitely is an issue that has happened to me with the everflow and Northstar pumps I've used in the past that's why I said that it could be an issue that should be highlighted in the video so no your wrong about that. You know that it is an issue that can occur too since you just acknowledged it in your previous comment and in the video you linked, now your trying to backpedal like that isn't even something that you should check for? Good one! "That initial adjustment should be done when you install the pump for the very first time, and you are tuning it to the appropriate flow for the outbound side of your plumbing set up. You should never touch that crew again" ya what a genius argument, that's like saying you hooked up the pump to the hose which should only be done once so you never should check to see if your hose has a leak in it. "But since I’m an expert and you are not,you would not know that. why your channel go no vids? You seem like an expert at content creation. You really need to start posting content before you start criticizing." Ah the good old I'm an expert on this so you cant criticize me approach good one. You definitely don't look like an arrogant moron for making that argument. I like how instead of just either acknowledging the mistake you made or just ignoring my respectful comment this whole 40 something year old grown man decides to have a hissy fit in the comment section of a 3 year old yt video.
@@TheH2OPROExteriorCleaning I’ve made over $4 million just so far this year. I have multiple patents in this industry, including a pending one for an electric pump. Almost 50,000 subscribers on a UA-cam channel that I really don’t even try to push. Do you really think you are bothering me? 😂 Also I’m 37 not 40 something Efff off
I noticed I lost prime when on a 2-story. Got down & ran it for a minute & it was good to go. Now run it some before going up a ladder. Also, I always take most the hose off the reel when using the system, same with the pressure washer.
I know this is old and different brands have prolly hit the market, vut are them everflo pumps the best budget friendly pumps for a new startup business? Thanks.
My pump doesn't run continuously like that. It runs and stops over and over. About 2 second intervals. Is there a way to adjust these pumps to run continuously while you are actively spraying?
That’s hilarious. Used my blend manifold for the first time yesterday. Lost prime, went straight to the soap tank. Bingo! Now, if I could just figure out why I hear a loud click when I let off the trigger. Bad pump? Pressure switch?
so i am having an issue with my 12v system. i bypassed the manifold completely and am pulling right from a water tank through the pump. the odd thing is, the remco 5.3 is a brand new pump. ran it a few times but the issue is, it will pull water sometimes then not pull anything at all but the pump is running with no suction. any suggestions?
@@southeastsoftwash4020 I found it once I searched 12v on off switch on google and looked for a while but only summit racing had them for sale from what I saw! I needed a clean looking flush mount one
dilectric grease does not increase conductivity. i don't know where you heard that. it is a barrier to prevent moisture, water, dirt, debris, from entering. if you use a lot of dielectric grease you can prevent electrical connection
Question. I have a pump which is running but it’s not pulling any chemical there’s no suction at the end of the hose which pulls chemical and also the hose which pulls water
No pocket knife,no basic tool kit? Sorry if I sound “jaded” but find so many truck drivers out here that can’t change a head light bulb. Maybe need a float switch with a buzzer that goes off when close to empty?
You need to turn this video link into a QR code and have it printed as a sticker and put on your builds somewhere. That will help decrease time wasting calls.
Well I'll be damned, that is a really nice idea!! Have a "Troubleshoot: Open App: Scan: QR CODE: XXX" That way people don't have to panic, there is a panic button, or QR code, that will walk you through exactly what we're gunna be doing on the phone, save their time, watch the video, check off every troubleshoot methods, boom time and headache hopefully solved
@@southeastsoftwash4020 The video you did tonight was pretty all encompassing. I mean it's kind of hard to screw up after watching that video. You literally took a year of aggravation and learning and put it into a few minutes. I just think finding a way to create the broadest dissemination would help you save time.
Cody, my everflo 5.5 blows fuse every time I flip switch on. All wiring looks good. Only used pump for 3 jobs and run water thru it for 5 minutes after each use. Any thoughts ? Thanks
My issue this week was the pressure switch not turning off my pump when I close wand, and either sets off relief valve or blows hose off. Thinking it’s the relay sticking in closed position. I’ll find out tomorrow when the née relays come one.
Good Morning.. should your everflo pump should be next or close to your reel line.. ? Or it doesn't matter if the pump is on the opposite side ok the reel?
Ok I got it to work where there was a kink on the hose, but now that I put my jrod on the first and last one on the jrod work perfect but the two in the middle start doing the same sound on the pump!!
Accounting tip for the skid/trailer build side of the business. Separate the business entities and end your fiscal tax year during the slow time of the build season. It enables you to decrease inventory and increase COGS. This reduces taxable income. You might be running into this problem with getting supplies from your manufacturer (fyi). Cheers brother....im leaving Accounting and starting up in the spring.
Yep. I knew this from my old days in a different business. We’d always reduce inventory as much as possible in the last month. Hope you rock out in the spring!!
@@southeastsoftwash4020 haha I thought about that as I was typing as well. I really like y'all's setup and would like to get one sometime in the near future. Just hard to pull the trigger due to time restrictions with 3 toddlers.
I've been running my current 5.5 12v for nearly a year now...same pump. Washed a bunch of roofs, houses, and driveways this year. I have a 3 way valve on my sh and soap lines and at the end of a job, I'll switch them to water and let it flush my blend system and pump for a good 5 minutes or so while I wrap things up. Just happened to notice yesterday some corrosion leaking out around the head of the pump but it still was going strong and got me through a big roof job! Guess my backup pump I've kept in my truck might finally see some action...lol
“If you’re a grown man you should have a pocket knife.” 🤣🤣🤣
And a handkerchief and a comb and grandma checked before I was allowed to leave the house
@@alleyoop4465 🤣
Bro exactly what I was thinking lmao. True statement though
Unless you work for the railroad then you are not allowed to have one ......stupid i know
A lot of great info for even the experienced cleaner to listen to on occasion. I will refer to this video at the start of next season. Thanks
im watching at night so i dont have time to try the fix but i got a good feeling you helped me find my issue thanks!
Thanks so much for this video! I legit just learned how to properly maintain, troubleshoot from Basic -> Step 1-> Step 2, and how much / long pumps should last and how to actually maintain them.
I hope this video saves you guys so many headaches, I really think if people know this video is out there, they should ONLY contact you should all these problems not solve it.
Yea that’s the plan. Hopefully guys can keep their stuff running which will help them make more money and less downtime
I have a problem with my pump , turned it on one day and smelled something burning but still worked for a while then went out. Checked fuse and everything few days later found problem end up being the regulator. Great info
Thanks!!
I'm about to start up a Soft Wash Maintenance Shop cause some people just ain't got no mechanical skills ‼️😭
It’s a epidemic 😂
You have to be careful with that n o s cody because I did that inhabiting it back 30 plus years ago and it wasn't something I wanted to keep doing or I'd still be sitting on my sofa. 🤣🤣🤣 I crack myself up sometimes. Lol. You guys have done great things over the years and it is commendable. Great job Team! 👍
Appreciate your vid. Used advice to tighten my new everflo to fix leak and also your other video on adjusting the set screw for sweet spot. I referenced you and your helpful videos on my channel. Thank you once again.
Great info. Helps to be methodical. Thinking through a problem will lead to a simple solution. Love your units and your videos.
Hey just a problem you guys forgot to include in your video(and for some reason none of these pressure washing channels ever seem to acknowledge.) is if your softwash pump loses flow or doesn't seem to have flow like the last time you used it, make sure to tighten the set screw on the front of the pump. That is definitely a constant issue you will run into at least from my experience.
1) I don’t forget anything
2) here’s where I “acknowledged” the setscrew four years ago in a video ua-cam.com/video/QKjh-xbsZUM/v-deo.htmlsi=0puX2VhKDmpRVFRn
3) you don’t just go to adjusting the pressure switch every time your pump acts weird
@@southeastsoftwash4020
1) umm yeah you kind of did, that's why that issue isn't in your video about fixing every possible issue with a soft wash pump
2) linking another video doesn't change the fact that you forgot to include that issue in this video
3) I never said to do that every time your pump doesn't work, just an issue that can come up
4) what's with the passive aggressiveness? not trying to make you look inadequate or anything, just pointing out that you along with alot of other channels don't ever mention this blatant issue with 12v soft wash pumps a whole lot. Not trying to hate
@@TheH2OPROExteriorCleaning
Well, since I have actually invented my own series ofpumps, and am now a pump manufacturer, maybe we should let me be the expert on what is and is not appropriate to include.
Adjusting the pressure set screw is not part of this video for a reason. Because it is not part of a troubleshooting procedure. You are adjusting a pressure setscrew, which is not the root cause of any problem.
That initial adjustment should be done when you install the pump for the very first time, and you are tuning it to the appropriate flow for the outbound side of your plumbing set up. You should never touch that crew again, unless something changes on your hose/Gun/tip, etc.
You are simply misdiagnosing symptoms. But since I’m an expert and you are not,you would not know that.
why your channel go no vids? You seem like an expert at content creation. You really need to start posting content before you start criticizing.
Go to hell
@@southeastsoftwash4020 That definitely is an issue that has happened to me with the everflow and Northstar pumps I've used in the past that's why I said that it could be an issue that should be highlighted in the video so no your wrong about that. You know that it is an issue that can occur too since you just acknowledged it in your previous comment and in the video you linked, now your trying to backpedal like that isn't even something that you should check for? Good one! "That initial adjustment should be done when you install the pump for the very first time, and you are tuning it to the appropriate flow for the outbound side of your plumbing set up. You should never touch that crew again" ya what a genius argument, that's like saying you hooked up the pump to the hose which should only be done once so you never should check to see if your hose has a leak in it.
"But since I’m an expert and you are not,you would not know that.
why your channel go no vids? You seem like an expert at content creation. You really need to start posting content before you start criticizing."
Ah the good old I'm an expert on this so you cant criticize me approach good one. You definitely don't look like an arrogant moron for making that argument.
I like how instead of just either acknowledging the mistake you made or just ignoring my respectful comment this whole 40 something year old grown man decides to have a hissy fit in the comment section of a 3 year old yt video.
@@TheH2OPROExteriorCleaning I’ve made over $4 million just so far this year. I have multiple patents in this industry, including a pending one for an electric pump. Almost 50,000 subscribers on a UA-cam channel that I really don’t even try to push. Do you really think you are bothering me? 😂
Also I’m 37 not 40 something
Efff off
You can truly appreciate those beautiful trailers once you actually make a sw system and it looks like a IED
Coty I believe you put the wires on backwards on the pump when showing the prongs. Might check that skid brother.
I may have lol. I’ll check it tomorrow. Thanks!
I was thinking the same thing!
@@wildwestwashservices7612 too distracted lol
@@southeastsoftwash4020 just looking out for you brother lol👍
Vacuum leak because it's on the suction line pulling air in to the system.
Once again, awesome video
Thanks
Yup
I noticed I lost prime when on a 2-story. Got down & ran it for a minute & it was good to go. Now run it some before going up a ladder. Also, I always take most the hose off the reel when using the system, same with the pressure washer.
I know this is old and different brands have prolly hit the market, vut are them everflo pumps the best budget friendly pumps for a new startup business? Thanks.
My pump doesn't run continuously like that. It runs and stops over and over. About 2 second intervals. Is there a way to adjust these pumps to run continuously while you are actively spraying?
Do you have a check list for periodic maintenance. Every day,every week,every month,every ?
This video is much appreciated…
That’s hilarious. Used my blend manifold for the first time yesterday. Lost prime, went straight to the soap tank. Bingo! Now, if I could just figure out why I hear a loud click when I let off the trigger. Bad pump? Pressure switch?
My pumps have been leaking out of the wiring harness. Is that why you have them mounted upside down?
so i am having an issue with my 12v system. i bypassed the manifold completely and am pulling right from a water tank through the pump. the odd thing is, the remco 5.3 is a brand new pump. ran it a few times but the issue is, it will pull water sometimes then not pull anything at all but the pump is running with no suction. any suggestions?
Hey Cory! Great video, I’m not sure what size garden hose to get, is that flexzilla hose on the trailer 5/8” or 3/4”? Thanks!
It’s 5/8
Where are y’all ordering the red flush mount on off switches at I can not find a flush mount switch that style anywhere
Amazon. Also some boat shops carry those
@@southeastsoftwash4020 I found it once I searched 12v on off switch on google and looked for a while but only summit racing had them for sale from what I saw! I needed a clean looking flush mount one
dilectric grease does not increase conductivity. i don't know where you heard that. it is a barrier to prevent moisture, water, dirt, debris, from entering. if you use a lot of dielectric grease you can prevent electrical connection
It’s says “promotes conductivity” on the can 🤷🏻♂️
Hey Coty, where do y’all get those clips for the softwash wand? Thanks man!
You can usually grab them at ace. They are broom storage clips
@@southeastsoftwash4020 oh wow that’s smart! Thanks man appreciate it
Fantastic 12v video guys!
Thanks! Hopefully this video will help some people!
Question. I have a pump which is running but it’s not pulling any chemical there’s no suction at the end of the hose which pulls chemical and also the hose which pulls water
Same problem here
Thanks for the in depth info
No problem!
I love your trailer setups. What's a ballpark figure?
It’s on the website. You can get a exact price on there
Coty, where do you get the new style plug ins for the pumps?
Amazon has some.
Tractor supply has them also on the pump and fitting aisle as well if you need one locally.
Great stuff guys, very detailed!
Did you charge the batteries? Is it plugged in?
the fuse keeps blowing on my pump. i flick the switch on and the fuse blows however the pump does not engage. what could the problem be?
Replace it
Awesome tutorial!
Thanks
What size pump you recommend 5.5, 7gpm? Or what?
"you're a grown man.. you should have a pocket knife". hahaha. AGREED....
1000%!
What up Coty Dustin, justin and rusty... whens the next washathon . id love meet up with u guys again!!
Definitely gonna have to hang out again. Idk if we will be doing another big event again. My schedule is just crazy
What about when pump goes on and off every 30 seconds new pump have tried 2 batteries still same issue
Will a soft wash system run a surface cleaner to will it have to used on with a pressure washer
No. Pressure washer. 12v pumps are only about 60psi. You need about atleast 3000psi to successfully run a surface cleaner.
No pocket knife,no basic tool kit? Sorry if I sound “jaded” but find so many truck drivers out here that can’t change a head light bulb. Maybe need a float switch with a buzzer that goes off when close to empty?
Great information, thank you...
Great video
Thanks!!
Awesome video great info thanks brother!👍👍
“ My pleasure” - chik-filet voice 😂
@@southeastsoftwash4020 lol😂 every day except Sunday!
I always used an irrigation booster pump.
Simple flo chart?
You need to turn this video link into a QR code and have it printed as a sticker and put on your builds somewhere. That will help decrease time wasting calls.
I did that in a trailer build once. Dude still called 😂
But it was a cool feature
Well I'll be damned, that is a really nice idea!! Have a "Troubleshoot: Open App: Scan: QR CODE: XXX"
That way people don't have to panic, there is a panic button, or QR code, that will walk you through exactly what we're gunna be doing on the phone, save their time, watch the video, check off every troubleshoot methods, boom time and headache hopefully solved
@@southeastsoftwash4020 The video you did tonight was pretty all encompassing. I mean it's kind of hard to screw up after watching that video. You literally took a year of aggravation and learning and put it into a few minutes. I just think finding a way to create the broadest dissemination would help you save time.
GREAT INFO VIDEO
Great idea to make this video to save y'all time!!
Hopefully!
Anyone.. if you have a breather line fitted to your sh tank, will it cause air in your line/system?
Naw. Won’t affect it
Some folk’s don’t need to own hand tools.
What’s up Rusty?!! Lol
Would the real rusty plz stand up
Key word On demand pump
Yep
Not worth trying to rebuild.
Yep
I have a relay that's just buzzing when I turn on my switch. I've replaced the relay. I'm guessing its the pump?
Probably
Good stuff guys! Rusty is an electrician? Who woulda thought.😂😂😂
Cody, my everflo 5.5 blows fuse every time I flip switch on. All wiring looks good. Only used pump for 3 jobs and run water thru it for 5 minutes after each use. Any thoughts ? Thanks
So many things it can be that can cause that. I’d just swap it and see if the new one does it too
@@southeastsoftwash4020 thanks Cody 👍
My issue this week was the pressure switch not turning off my pump when I close wand, and either sets off relief valve or blows hose off. Thinking it’s the relay sticking in closed position. I’ll find out tomorrow when the née relays come one.
Yep. Probably sticking
@@southeastsoftwash4020 What's the long gevity of the motors?
A better title would be, How to diagnose issues with a 12v pump. Because you didn't "FIX" anything. "we just toss'em"
Maybe a better title would be how to get Brad H more than one subscriber in nine years.
Good Morning.. should your everflo pump should be next or close to your reel line.. ? Or it doesn't matter if the pump is on the opposite side ok the reel?
Ok I got it to work where there was a kink on the hose, but now that I put my jrod on the first and last one on the jrod work perfect but the two in the middle start doing the same sound on the pump!!
Great video
Very good training. I really appreciate what you do for us in the field.
No problem!
Thanks man
What is the difference between the pump that I see you have and everyone else has vs the Everflow bleach pump?
Great video! I’ve had every one of these things happen minus the air lock
Murphy law is strong!
@@southeastsoftwash4020 yup and your channel helps my odds 😉
Freakin hilarious. Snarky? Naaaaaaaaa Tell it like it is. LOL But great video!!
Hello Cody where can I get that blue tip sprayer you have on the softwash gun?
Great video! What battery charger could i use? Thanks
Outstanding information I really appreciate you guys!!!
Good stuff Coty!
Nice!
Accounting tip for the skid/trailer build side of the business. Separate the business entities and end your fiscal tax year during the slow time of the build season. It enables you to decrease inventory and increase COGS. This reduces taxable income. You might be running into this problem with getting supplies from your manufacturer (fyi).
Cheers brother....im leaving Accounting and starting up in the spring.
Service vs manufacturing is drastically different.
Yep. I knew this from my old days in a different business. We’d always reduce inventory as much as possible in the last month.
Hope you rock out in the spring!!
Have yall thought about adding float/level switches for your tanks with some light indicators. May help from getting those calls.
Naw lol. If a dude is too dumb to just look at his tank, he won’t look at the indicator. Plus it’s just another component to buy and maintain.
@@southeastsoftwash4020 haha I thought about that as I was typing as well. I really like y'all's setup and would like to get one sometime in the near future. Just hard to pull the trigger due to time restrictions with 3 toddlers.
GREAT JOB Cody and Ty!
I have absolutely no reason to watch you guys videos but i still do for entertainment purposes😂
I was holding back 😂
Great information and resource video.
I hope it helps!
Great video...Justin/Rusty is a natural
He’s ugly, but pretty smart lol.
I've been running my current 5.5 12v for nearly a year now...same pump. Washed a bunch of roofs, houses, and driveways this year.
I have a 3 way valve on my sh and soap lines and at the end of a job, I'll switch them to water and let it flush my blend system and pump for a good 5 minutes or so while I wrap things up.
Just happened to notice yesterday some corrosion leaking out around the head of the pump but it still was going strong and got me through a big roof job! Guess my backup pump I've kept in my truck might finally see some action...lol
This is the exact situation for me too only difference is mine is the 7gpm 12v and I noticed the head of the pump was leaking into my truck bed