About the same as it’s the same size, rubber was £150 then fascia boards and soffits for the front. I did save some money on the roof by making my own kerb/trim with roof battens to go around front and sides, the rubber was glued to this and an angle trim placed on top. It can be seen in the pictures I think😅
@awkwardtom thank you for the reply looks amazing , I like the fact u had tape under the pallets too ! I am guessing each pallet is 1 m high for the wall to ensure not over 2.5m because u are not 2 m away from neighbour
Thanks for the feedback, yes I used damp proof membrane on the pallets that would be on the ground. They were mainly 2 sizes 120x100 & 100x100 so when stacked it came to 220 tall + the base then the slope. Let me know if you have any other questions
Nice , I have about 20 pallets of 1.2 m x 1m at the moment . Looking to get more . Well done and yes if I have any question I may bother you haha. I am looking to use tin sandwich roof instead
This my favourite pallett shed build
Thank you for watching and for letting me know you like it. There will be a part 2 when the interior is complete. Comment pinned 😊
Awesome looks rock solid 👍🏻
Thanks, its still standing after all the storms we have had !
Always remember to have shed floor at least 150mm or 6 inches of ground to stop rats nesting and good air flow to stop rot.
Grass roof would have been cheaper ! I like it though. The sliders look great!!
Hard to get a mower up there though ! 😆 I designed the shed around the doors as I was given them first. Thanks for the feedback
Rubber roof and associated facsia is costing me £300 for 2×3m shed..... How much was your roof?
About the same as it’s the same size, rubber was £150 then fascia boards and soffits for the front. I did save some money on the roof by making my own kerb/trim with roof battens to go around front and sides, the rubber was glued to this and an angle trim placed on top. It can be seen in the pictures I think😅
What are those white bases you used?
They are polystyrene insulation cut to size and fitted in to the pallets used for the base. Worked really well!
How tall is this ? Thanks
@@lukazleong just under 2.5 metres ( at the highest point) so it’s within permitted development regs in the UK
@awkwardtom thank you for the reply looks amazing , I like the fact u had tape under the pallets too ! I am guessing each pallet is 1 m high for the wall to ensure not over 2.5m because u are not 2 m away from neighbour
Thanks for the feedback, yes I used damp proof membrane on the pallets that would be on the ground. They were mainly 2 sizes 120x100 & 100x100 so when stacked it came to 220 tall + the base then the slope. Let me know if you have any other questions
Nice , I have about 20 pallets of 1.2 m x 1m at the moment . Looking to get more . Well done and yes if I have any question I may bother you haha. I am looking to use tin sandwich roof instead
I am back haa how tall is the French door plz