2021 Can-Am Outlander 850 XMR snorkel install In Depth
Вставка
- Опубліковано 14 жов 2024
- Taking a in depth look at installing a Can-Am snorkel on a 2021 Can-Am Outlander 850 XMR which you can buy at the links below.
Sign up for an Amazon Visa at the link here and start earning rewards! www.amazon.com...
Can Am Outlander XMR Snorkel Kit Part# 715002518: amzn.to/2Zuu3F9
Can-Am Gauge Support Part# 705013984 google it and you can buy from Partzilla or elsewhere.
I am a Amazon affiliate member and if you purchase the kit by clicking on my link I may receive a small commission which helps to support this channel.
DynoJet Power Vision 3 for 2019-21 CAN AM OUTLANDER PV3-25-10 amzn.to/3p1UFb7
Can-Am Promount push frame for plow for Outlander Part# 715004339: amzn.to/2ZxIqZv
Can-Am ProMount Mounting Plate for Outlander atv Part# 715006360: amzn.to/3ayrKHG
Can-Am ProMount 60" Plow blade for Outlander Can-Am official part# 715005201 I can't find a link to it on Amazon so the one below might work
but im not 100% sure so double check for your year make model atv.
Can-Am New OEM ProMount Steel 60" (152 cm) Blade Outlander Part# 715004202: amzn.to/2NbbtQ7
Can-Am Heated Grips & Thumb Warmer Part# 715004815: amzn.to/2ZIreAJ
Can-Am Wired Remote Control for WARN Winches Part# 715006378: amzn.to/3aAj9Eq
Can-Am New OEM ATV Outlander Heated Hand Grips & Throttle Combo, 715003250 amzn.to/2MHja0b
Fahren H11 Low beam Led bulbs: amzn.to/2NZCwO5
Fahren H10 High beam Led bulbs: amzn.to/36HpzyZ
BeamTech H11 Low Beam Led bulb: amzn.to/36GU2x5
Beamtech H10 High beam Led bulb: amzn.to/3tsNqfx
Can Am Mud Strap: amzn.to/36C2Bt
Sedona Mudda Inlaw (28x10-14) amzn.to/2JkuTfY
Sedona Mudda Inlaw (30x10-14) amzn.to/31Dp7wo
Sedona Mudda Inlaw (32x10-14) amzn.to/2W92uil
Buy Nilight 25" light bar here: amzn.to/2MU6OiB
Buy the Nilight wire harness kit: amzn.to/2PpqfBg
My UA-cam PC channel: / pcaddict365
My UA-cam Off Roading Channel: / temptation2003
"Life of Temptation2003" UA-cam Vlog and much more Channel: / @lifeoftemptation_offroad
Facebook Page for "Temptation2003 & Life of Temptation2003": / temptation2003
Facebook Page for PCaddict365: / pcaddict365
So I guess from the instructions which were missing from mine on the left side when you are sitting on the ATV by the CVT Exhaust port I showed on the video where I had trouble with it hitting the new gauge support the correct thing to do is cut a hole in the gauge support to allow the cvt exhaust to exit the new gauge housing similar to the hole that was on the original stock gauge support housing. But only make that hole on the left side when sitting on the bike. If you have questions look it up online or check for another video that shows that part. I apologize for not showing it in this video because I did not know about it at the time I installed mine.
Just curious to why you had to replace the gauge pod? Will the snorkel extension piece not fit over the stock xmr gauge pod?
@@904nole I'm wondering the same thing
@@904nole the stock gauge pod has a hole for the stock xmr air intake so you could use it but would have an exposed hole that would show on the side where the intake used to be, cleaner look with new pod.
@@streetspeed2522 forgot to include u in reply
I have an xmr outlander on order now and I would like to say that you put together a fantastic Install video.
Welcome! Just remember on the left side of the new gauge cluster housing as you are sitting on the bike to drill a small hole with a hole saw bit for the clutch exhaust to vent better. I didnt know about that when i did the video its the spot on the cover where you see the chaulk at on. It will make sense when you get yours. If any questions message me of fb messenger at "Temptation2003".
i like this guy because he isnt scared to make a joke
Thank you! Saved us the $800 dealer install on our 2021 XMR 1000. I threw ya a couple “that’s what she said” 🤣👍👍👍
Awesome! Glad to hear it.
Nice video we bought a 2020 850 max xt and I bought the brp snorkel for the rare occasion I'm in water for peace of mind but put off installing it because the paper instructions sucked this will help me out alot thank you
I got a '21 850 XMR IT's a beast. .
The jokes you made throughout this video made me subscribe
Hi, thanks for the video, but i think you forgot to install washers on the backside of the riverts)))) If you take a look at you original XMR gauge support they are all there))
I have a Can Am XMR 850 too (2019). I could not agree with you more. We're not driving a boat or a sub. And I too, like to see where I'm going. Can Am will probably come up with a different design in the future but for now, a saved motor is much better than a wet clutch. Nice video. As always "Ride Hard and Be Safe" MN Bill
Where you at in Mn? Know any good muddy trails to ride on?
@@Temptation_Offroad I'm down south of the cities. (Apple Valley) We usually ride Spider Lake, Nemaji, Emily Outing but we've been all over. Right now Spider Lake (Foot Hills State forest) is open. We are planning a trip up to Spider Lake on May 7th / 8th. Where are you guys from?
@@minnesotaxmr Im way north of the cities by Bemidji. Too bad we are so far apart otherwise it would be fun to go for a ride!
@@Temptation_Offroad We get up to Solana loop . Red Top etc too. I saw in a couple of your videos you got some power lines you ride , where they at. I'll drive 2-3 hour for a muddy ride.
Great Video! What size was the hardware to extend the vent lines? Going to attempt mine this weekend.
I just cut a small piece of hose off and brought it to Napa and they gave me the pieces to connect the hoses together and i asked for 3 feet of hose to match.
@@Temptation_Offroad Thanks, going to do that tomorrow.
@@Justinmako Good idea, then you should be set to go for the weekend install!
Do you happen to know what size plastic tubes and connectors we need? I see one online that is 5/16 inside and 7/16 outside. Wonder if that be it?
not a can-am fan but your quad does look pretty good, well done vid as well
So why did you order another gauge cover? Is the stock one different?
Great vid. Little spit always helps.
what is the point in buying the new gauge cluster support? picking up my snorkel kit today. also do you have any ideas for raising the belt box intakes and exhaust?
So you dont have a big hole showing through on the right side I believe. If you want to increase the belt intake and exhaust you will have to go with aftermarket snorkel kit like Warrior snorkels or make your own.
Nice job on the video. Is this the $100 snorkel kit or was it the higher priced kit? Thanks.
$100 But you will need to buy another gauge support housing like i showed in the video also. They cost about $32.
Do you have a part # for the addntl gauge housing?? So this kit ddnt hv tht included.....
@@jusmogrannysboy The part number is in the description below the video for the gauge housing.
Can i do that on my 2021 max xt? All hose are up . Thanks
What size trailer is that? 16' or 18'?
Thanks for the help snorkel coming in soon.
8.5'x20' Stealth Titan. I will do some videos on it in the coming weeks so stay tuned.
Fxr I wear their gear. Solid gear highly recommended.
I use FXR gear for snowmobiling and also for my winter jacket when its cold out. Great stuff for sure!
Does your handguards hit your snorkel at all, when turned all the way? Handguards on the new Renegade hit the snorkel I've noticed.
Not that I've noticed yet
@@Temptation_Offroad thanks for the reply. I'm a Honda guy but really want to pull the trigger on this quad. Wasn't a big fan of the Yellow( and I want the front locker) but it's starting to grow on me. These are hard to find in Michigan and Dealers want a fortune.
@@scottmulholland7975 Yeah, i wasn't crazy about the color either from seeing photos of it but once I went to pick it up in person it actually isn't bad at all! These are super hard to find. I looked all over by the Twin Cities in MN and couldn't find one, then by chance I found one over in ND. If they didnt have one the next closest would have been eastern Wisconsin or Michigan. Usually right now dealers are holding to MSRP for price, but they might give a break on accessories.
Were did you order your cluster plastics from ?
The dealer ordered everything when i bought the atv. It was a package deal and price for atv, snow plow, hand warmers, snorkel kit, gauge cluster etc.
How much is 1000 XMR in the USA at the moment?
New 2023 XMR 1000 is about $15500 and used ones are from $9700 to $14500 depending on year, miles, condition etc.
So stock it’s still snorkeled on the 1000’s right?
Yeah up to about the radiator roughly.
Thanks for "not" showing how to get the cluster out. It doesn't just pop out.
How much does the snorkel impair your vision while sitting on the unit ?
For me not at all, I was wondering the same thing. Im 6'2" tall though, maybe if a person were a lot shorter it might be in the way more but honestly its not bad at all.
Why would Can am sell a "snorkel kit" that you have to modify yourself?
what part number was that new gauge mount? was it a xtp gauge mount?
Not sure the dealer ordered everything for it when I bought the atv. I just asked them to order me a snorkel kit for the Outlander.
This does me no good, I need something to extend the cvt port up so it doesn't get flooded all the time.
All the dirty jokes smh 🤣
😂🤣😂🤣 I had to😬