This Mod Should be a MUST on the YZ250X, YZ250 / Luxon Triple Clamp / 22mm offset
Вставка
- Опубліковано 9 кві 2024
- I was on the hunt to modernize the handling and ergonomic on the YZ and I just find the way to do it.
#yamaha250 #yamaha125 #yz125 #yz125x #yz125x2022 #yz250 #yz250x #yz250f #yz250fx #yz450f #yz450fx #yzfamily #offroad #enduro #trailriders - Спорт
I'm going with the10-14 YZ450f trees @ 22.5 mm offset for 100.00 I just need to press out the stem and bore out the upper 2mm and it will bolt right up. If they work out as much as you say I will mill off some of the fat for a more one off look..
I was thinking about doing that to save money the lower triple clamp bolts right in I don't think you need too press out the stem I have one and I installed no problem, only thing is the upper clamp need to be bored out.
@roberturmosi-dirtbike-atv That is easy to do I have both a Lathe and Mill. Offset is 22.5mm so that should be fine... I'll let you know how it works out..
@@PA-Tammy Please do I'm Really curious.
Great video. Any YZ250 owner knows the bike does not turn well. Can you post links of your current setup for triple clamps and bar setup? Purchase links would be great, thanks.
The bar set use is from urmosi.com/ the triple clamp is:www.luxonmx.com/
Could not see the size chart property , what size do you need for a yz250 is it the same as the yz250x looks like it says long 59 ? Also i see you moved your front brake cable behind your number plate i heard that the cable can get stuck if your front suspension travel all the way down then the cable get stuck
You need Enzo to do your Forks ! Night and day !
Got them on and a quick run around the house. I have a Scotts on my bike so I had to mill out a slot for the Scotts mount so my first test was without it hooked up and I could feel the difference right away. I can see this being the best mod I've could have done I can see it helping me out in the woods with less fighting it into turns with stage 4 COPD I need all the help I can get..
I may have to try it on my WR250F as well..
If you use the yz450f bar mounts you just need to bore out the upper or you could get a set all done from me..
ua-cam.com/users/shortscyDufr366pI?si=EFreODANwABg71NJ
What does offset mean does it change the angle of the fork steeper
Yes it's changes the angle of the forks. in this case move the front wheel back closer to the engine 22mm. and that's makes a huge difference on the way the bike handle turns
DO YOU LOSE HIGH SPEED STABILITY? WHAT IS THE TRADE OFF?
I you go top speed on bumps it isn't that stable then it was. but I trade that all day to have the readability what it has now. I have been riding every day with the YZ since last weekend because enjoy it that much
I got time today to get them In my mill and I got them both. 001 over stock bore. A short video of the milling.. I will install and test ride this week hopefully..
ua-cam.com/video/c-3niFBNhok/v-deo.htmlsi=q5GCN_tj1QrQQKVl
I looked the video looks good. Looking forward to hear the test results
Lol that piece of aluminum is 1K. That is 10% of the cost of the whole damn bike. Let that sink in for a minute. By the time you're done building the "perfect" bike, you could've bought a second one. I probably suck and don't notice any shortcomings but that kind of money just doesn't make sense to me. 80% rider and 20% bike as they say! I'd rather spend that money on gas or cool trips with the bike to good riding areas. I enjoy some of your content and I understand you want to make money off of it. I just think sometimes we need to step back, and look at things objectively as a leisure rider.
I understand nor everyone can afford this parts and I try to prioritize what's really stands out because I'm really picky when it comes to parts quality and workability. This are really changing the way the bike behaves. I'm not here for the money more for try to passion what I have learned it on to your guys. I actually own this company just to prove my point :urmosi.com/
Is no necessary criticism him or the product he is sharing his experience Mr Robert Thank you for your passion and professionalism
We need more people like you.
I love that you are looking always to find new staff to improve the motorcycle
Yes could be 80% rider and 20% bike but if this apply to everyone way the professionals riders have the best products in the market?
Have a great day Mr Urmosi keep bringing new staff that a little group of people will be unhappy but a big group will be thankful!!
@@ivnepe Uh ok man, cool story.
Oh my, just wait until you learn about how much people spend on their cars to make them worse