Hello dear friends, I always try to make quality videos for you dear ones. And my only request to you loyal friends is to share and like this video. Thanks for supporting small channels. I LOVE YOU .❤❤❤❤
It only has one small problem The transistor has a high chance of burning so this generator probably won't stay long I suggest adding a protection circuit
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
You put too many turns on the primary because it's a high frequency transformer, and also cause of the skin effect you should put thinner wires In parallel to make a thicker wire, and it'll help with the skin effect. And use about 4-8 turns. Have a great day.
No because there needs to be sufficient inductance on the primary for inductive spiking. It is configured as a joule thief circuit with an additional high voltage output coil.
When you touch one hand in aluminium foil and other hand touch the bulb💡 glow more see in this video . My question is why can't get 🤔the Electric sock⚡ when you touch the two terminal🔌
You connect only one phase to the bulb..and other with the aluminum foil, But it still work when you don't touch aluminum.... is it possible to work on single phase🤔
Bro i made it and got the plasma but plasma intensity is low only seen in dark place fully Is there any way to increase the lightening of plasma Ur video is so helpfull 💯💯
In the bulb using tungsten filament in high voltage high current having less resistance v=ir i is increasing then resistance will be decreased how it withstand?😅
درود بر تو یوتیوبر وطنم. برادر خوبتر میشه اگه از هر نظر معتبر باشی. مثلا با d880 و z44 هم تست میکردی. با دومی اصلا نمیشه باید زیاد تغییرات بدی با اولی هم من یکبار نتونستم اون ترانس رو درایو کنم . شاید ترانزیستورم سوخته بود تست نکردم.اما منظور اینه یه چیز کلی نگی اون پایین. عالی ...
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
its not working guys i bought the same circuit and tried it it wont work and even i tried it with my 30kv flyback transformer it did not work please don't waste your time on this
@@user-kg2yq2do7w i tried with a flyback transformer the one which can be found in old crt tvs. i got very very minimal arcs. the person in the video mostly has a tesla coil hidde under the table
Hello dear friends, I always try to make quality videos for you dear ones. And my only request to you loyal friends is to share and like this video. Thanks for supporting small channels.
I LOVE YOU .❤❤❤❤
آقا ما که ندانستیم ترانزیستور چیست!؟؟؟
It only has one small problem The transistor has a high chance of burning so this generator probably won't stay long I suggest adding a protection circuit
Do you want some creepy syrup on that icing?
Bro can I know is this safe to touch the bulb will it conduct to break the glass because of high energy
@@samuelbenaiah.r2396 . It's safe.
1 High voltage transformer
2 wire 30mm 28 turn
3 wire 0.40mm 24 turn
4 300 ×6 turn
5 cables 2
6 transitor d880 z44
7 resistencia 120 ohm
8 diode UF 4007
9 wan interruptor
10 disparador de calor
0.3mm*
Ok
Oxi do nada disparador de valor
u mean resistor
why the text begins in english
e acaba em portugues?
I have absolutely no idea what's going on but I love to watch your videos. Thank you. U ROXXX!
Most of these parts are easy to find, but where do you get the shiny metal paper and the glass ball?
I hope you're joking, but in case you aren't, that's aluminum foil and a light bulb.
this guy is joking probably lmao
You have no sense of humor guys😢
There is an alien planet exactly 6.9 light years away from earth you have to sell your testicles to the aliens for that
@@Sharvilsawargaonkar-jb2lv golden comment 😭😭
I can't believe am making this for a physics project
👌❤️
Did it work?
(2)👁👄👁
@@issoupewd nah it got canceled because in FUCKING IRAQ DOESNT PROVIDE THEM N IT WAS TO LATE FOR ME TO ORDER THEM ONLINE
@@ijesko_7 بأي مدرسة انتَ؟ اناهم اريد اسوي مشروع للفيزيا 😭😭😭
Thank you very much iam 13 years old and i love making this kinda stuff
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
What's that black thing you attached along with red switch?
Very nice job sir thank a lot,s Respactabile Sir
Please tell me what materials did you use please thank you
0:24 Where can I buy a transformer core with just the housing and no windings? Can someone provide a link, please?
you should link all the items used in discription
Bro should we use a new bulb Or even a working bulb could work?
Can i use 400kv step up power module? Pls tell me because tomorrow I have to get this project to my college😢❤
Hey bro where can i get that adapter of your did you make it or u buy it somewhere please replyyy
You put too many turns on the primary because it's a high frequency transformer, and also cause of the skin effect you should put thinner wires In parallel to make a thicker wire, and it'll help with the skin effect. And use about 4-8 turns. Have a great day.
thanks for comment 🙏🙏
good idea
please don't forget share for friends
❤️❤️❤️
No because there needs to be sufficient inductance on the primary for inductive spiking. It is configured as a joule thief circuit with an additional high voltage output coil.
Does the bulb become hot after working for few hours?
What will happen, if I increase and decrease the number of coil turns..??
Instead of 300 to either increase or decrease the coil turns
If you are speaking of the transformer It will effect the output voltage/current
Very very good bro👌👌
Thank you so much 😀
Hello, I made the same one, but without working with z44n, it broke the mosfet, why?
Can we run it for 6 hours till?, answer fast
Good video bro.
I want to ask a question that after recording a video its size becomes very large how to reduce video size.plz tell me
With volume reduction software, you can reduce their size to about 800 MB
please don't forget share for friends ❤️❤️❤️
@@skillmake which are you using
Selfappprom
Hello brother yr transformer kitne power ka h
قوی تر از قبل👌💛
مرسی عشقییییی داداش #حمایت share 😂😂
نه علییه😂
Sir is it fuse bulb or not please tel me????
Please answer my question..
Whats the black thing that was under the transistor???
Heat sink
When you touch one hand in aluminium foil and other hand touch the bulb💡 glow more see in this video . My question is why can't get 🤔the Electric sock⚡ when you touch the two terminal🔌
glass is your answer
@@skillmake I think glass worked as a insulator🧐
Sir D882 transistor laga sakte hai
where can i find this ferrite core?
i want to do this project for plasma school (egyolasma) and i have just less than month to finshing it
If I give 10volt power supply.... Is there any problem?
is the pump built separately?
سلام میگم اینکه آخر کار دستت رو به یکی از سیم های های ولتاژ می زنی برقت نمیگیره ؟
بعد میشه با های ولتاژ تلویزیون یکی بسازی
نع نمیگیره
پیدا کردم چشم
😂😂
Porque al final el cable rojo no lo conectas a ningún lado?
سلام داداش گل به جای فویل میتونید از چسب فویل استفاده کنید تمیز تر هم میشه
به امید موفقیت روز افزونتون🌹
لذت میبرم هموطنام میبینم موفق👏✌️
اره این مال خیلی وقت پیشه ولی ایده خوبی بود ممنون
Hello bro please reply
Where can we get ferrit core?
You connect only one phase to the bulb..and other with the aluminum foil,
But it still work when you don't touch aluminum.... is it possible to work on single phase🤔
yes it can work like tesla coil
Bro can we use high voltage generator for it
Do we really need that heat sink???
Bro i made it and got the plasma but plasma intensity is low only seen in dark place fully
Is there any way to increase the lightening of plasma
Ur video is so helpfull 💯💯
what the type is your ferrite core??
@@pri5469 bro we used mosquito racket circuit high voltage
@@goldyg2403 do you have any youtube video suggestion to make plasma globe ... better than this video
@@goldyg2403 so you just replace transformer part with mosquito racket circuit for high voltage???
@@pri5469 yes bro
And that worked
Sorry i have questions about what type of light bulbs
In the bulb using tungsten filament in high voltage high current having less resistance v=ir i is increasing then resistance will be decreased how it withstand?😅
so what made the light bulb turn into a plasma ball?
Have you figure it out why?
where can we find this ferrite core???? help me
Did you find it afterward?
How much current does this need?
İs there any link for buy that things
Bro please tell the things you used in it and give it in description.
ok thanks 🙏🙏
in what iteam can we get that flyback transformer ?
Hi in tv
The ones in a tv are not the same as this one. You can find these ones on ebay or aliexpress with or without windings and components.
What's the black thing that was under the transistor?
Heatsink
try to using an other driver circuit (ZVS or some other....) with 12v supply from the battery. Good Job!
I 'm Vietnamese. So i 'm not good at english.
Thanks for comment 🙏🙏
Ok i try
Don't forget share for friends
Thanks a lot ❤️❤️
The transistor in video is D880? And if you use the mosfet irfz44, you must use one resistor connect G to S
@@haduysaint yes transistor in video is d880❤️
Plug bulb into mains socket. Then get light.
Terrific video
Voltage from 6×300?
yes exactly
Stop gatekeeping what are the parts 😢😢😢
I wanna make it for project pls!!
안녕하세요 Skill Make님! 이 영상을 보고 따라 만들어 보고 싶어서 글을 남깁니다.
혹시 이 영상에 쓰인 재료들이 어떤 종류인지 알 수 있을까요??
알려주시면 감사하겠습니다!
من سیم پیچ ثانویه رو پیچیدم اما با دقت هم پیچیدم اما نمیدونم چرا خروجی نداشت و از داخل نشتی میداد چرا!؟
عایق کاری بکن
Good bro !
thanks bro dont forget share for friends my loyal friends
Guys is it possible to do it at home my teacher gave this as a homework
5:01 what is this bro
WHAT ARE THE MATERIAL
what the type is your ferrite core?
i am also have that same question!!! did you find answer??
درود بر تو یوتیوبر وطنم. برادر خوبتر میشه اگه از هر نظر معتبر باشی. مثلا با d880 و z44 هم تست میکردی. با دومی اصلا نمیشه باید زیاد تغییرات بدی با اولی هم من یکبار نتونستم اون ترانس رو درایو کنم . شاید ترانزیستورم سوخته بود تست نکردم.اما منظور اینه یه چیز کلی نگی اون پایین. عالی ...
and that small outlet PLEASE reply fast
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
🥰Thanks 👍
🤗
I want just want to ask what is the use of this project
its just experience
Anal stimulator.
What is the output voltage
How much does this costtt?
around 3 dollar
So funny! 🔝💫💥
thanks for comment 🙏🙏
please don't forget share for friends my loyal fan
How long can we use this transformer
Is it works same as flyback transformer
yes exactly
can you explain more
من یدونه ازینا از دیجی کالا خریدم اما نمیدونم چرا بیشتر از نیم سانت آرک پلاسما نمیده چراا!؟؟؟؟ 🤔🤔🤔
ورودی امپر پایین میدی
what is that black thing you put the screw on
It's a transistor
@@altoparlanti--loudspeakers5082 NO I mean the bigger black box thingy
@@billybaloney3073 it's a heat sink with thermal paste
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ua-cam.com/channels/BoZGn08nBAxE9M5T53_UKg.html
بلاخره گذاشتیش🤣
به سختی
@@skillmake 😑😭
Can anyone jsut list the items out for me ?? 😭
Thanks 👍
Welcome 👍
Where do I get the stuff
buy ebay or amazon
НА ВЫХОДЕ.
🔥🔥🔥
🙏🙏🙏
Is that really working or fake
its really work. you can make it.
How to make video give me
it is interesting
❤️❤️❤️😘
واااو أحسنت
Woooooo
حال کردی
خخخ آره خیلی حال داد
❤
any one try this????
1.1k like
W😍w
🙏🙏🙏
wow
😃
Exelet
Noisy music
its not working guys i bought the same circuit and tried it it wont work and even i tried it with my 30kv flyback transformer it did not work please don't waste your time on this
Have you found any other methods that work?
@@user-kg2yq2do7w i tried with a flyback transformer the one which can be found in old crt tvs. i got very very minimal arcs. the person in the video mostly has a tesla coil hidde under the table
@@Mindless_404 Thank you for the information!
?????
😂😂😂
اخیش
من گذاشتمش تو هم رکورد share رو بزن 50 رد کنی زدی
@@skillmake 😁بدبختی کسی دم پرم نیس بفرستم ببینن
?????????