She’s got that Two Tone right now haha ! When I first got the truck though she was really pretty. I’m going back to the red I had it painted originally, just have A lot of body work to do! ua-cam.com/video/nIcACCcTsJs/v-deo.html Here’s a video of her nice and pretty with my red 👍🏼🤙🏼
Nice 👍 truck I just got stepside for mine too but be awhile til I get to play with the obs. I plan LS swap too. But got two other projects gotta finish first🥴.
Sounds even better now running at 192 & 95 octane , check out this video , the idle clip at about 2 minutes or so is insane ! ua-cam.com/video/2uAn7m7XmXo/v-deo.html
@@KidKevi ok just saw your reply sounds great...idk if around 1700 stall would hold that back... sounds more 1200ish ... does it try buck at stop lights
A guy near my city makes stand-alone’s out of stock ones. You give him your harness and pay 350$ and it comes with a fuse box , Starter wire , key on , constant Power , and ground. It’s ran the factory route which is kind of a pain
I Appreciate the feed back , my aluminum intake tube had to be turned down for clearance and could not fit the bigger filter anymore, next up on the list is a better CAI setup ! ✅🤙🏼
@@KidKevi No problem man, I've got a few videos of my OBS on my channel. I need to do a update video before my new project on the truck. If you have time check it out.
@@brentrademaker I seen a LS6 swap OBS on there , she’s clean man ! I have older videos where my truck was all red and had shaved tailgate / roll pan , fleet side bed too. She’s ugly now , gotta get her back to being pretty ! I’ll check out your stuff man
Awesome build buddy. 👌
Thank you , i appreciate it!
She looks good wearing all them colors.
She’s got that Two Tone right now haha ! When I first got the truck though she was really pretty. I’m going back to the red I had it painted originally, just have A lot of body work to do! ua-cam.com/video/nIcACCcTsJs/v-deo.html Here’s a video of her nice and pretty with my red 👍🏼🤙🏼
Really good looking truck man. Glad i found your channel i like your content.
Need to get her painted but that’s all she needs ! Thank you sir , and stay tuned for all the upcoming content ⛽️👍🏼👀
Size cam. Send me the link
228R TSP camshaft
what exhaust?
Speed Engineering True Dual X Pipe exhaust with the Axle dump , 1 3/4” long tubes
Nice bro wish my 5.3 sound like that I also have the 228r 110lsa kit with btr 660 dual springs
It sounds 10x better now , recently started adjusting the idle sound ! But thank you sir , you already know how nasty this set up is
Nice 👍 truck I just got stepside for mine too but be awhile til I get to play with the obs. I plan LS swap too. But got two other projects gotta finish first🥴.
Too many projects slows them all down haha !
What's the idle rpm
Set at 750 with about a 100 rpm variation
@ operating temperature
Sounds even better now running at 192 & 95 octane , check out this video , the idle clip at about 2 minutes or so is insane ! ua-cam.com/video/2uAn7m7XmXo/v-deo.html
2:15 to be exact !
@@KidKevi ok just saw your reply sounds great...idk if around 1700 stall would hold that back... sounds more 1200ish ... does it try buck at stop lights
Badass truck 🔥😍
One of your old videos pop up what part of Oklahoma you from
Moore. I have a few on here of the truck !
She’s been through many stages
ua-cam.com/play/PLCKvWgGKdidCNnmgazIQVEUfgtviGKHfB.html
Hey Wht type of 4 link
I have caltracs man , traction bars , caltrac brand , these are for a flip kit !
@@KidKevi thanks I have the same truck just wit a cammed 6.0 need some advice on how to keep it down
Yeah man , my truck would wheel hop like crazy , once I got my caltracs set , it would just sit down and burn the tires off ! Haha
@@KidKevi have u ever seen Parallel for link
@@hevairloucious5969 yeah of course , what I’m running is 2 Link I’m pretty sure !
I'm sorry I still didn't hear you say what rpm that idle ..sounds good
I replied on your other comment!
What engine harness did u use or did u just wire both harnesses into one
A guy near my city makes stand-alone’s out of stock ones. You give him your harness and pay 350$ and it comes with a fuse box , Starter wire , key on , constant Power , and ground. It’s ran the factory route which is kind of a pain
@@KidKevi thanks bro I appreciate the reply back and info thanks 🙏
@@obslife1985 anytime , I’m about to cut down a stock 5.3 harness for my 06’ CTS LS swap !
@ best thing to do is order a standalone like this one. It comes with instructions and all
www.ebay.com/itm/401946297993
Nice truck buddy, Just food for thought, but you should put on a bigger air filter. Keep up the good work. 👍
I Appreciate the feed back , my aluminum intake tube had to be turned down for clearance and could not fit the bigger filter anymore, next up on the list is a better CAI setup ! ✅🤙🏼
@@KidKevi No problem man, I've got a few videos of my OBS on my channel. I need to do a update video before my new project on the truck. If you have time check it out.
@@brentrademaker I seen a LS6 swap OBS on there , she’s clean man ! I have older videos where my truck was all red and had shaved tailgate / roll pan , fleet side bed too. She’s ugly now , gotta get her back to being pretty ! I’ll check out your stuff man
U got an instagram? I'm out in noble got some questions on my 5.3 obs
Email extrememachinesokc@gmail.com
I am planning on putting the 383 or 6.2 in my 88 Chevy c1500
@Dean Farr Awesome Choice! Will be an awesome build 👍
What exhaust setup?
Shoenfeld long tube headers , Speed Engineering 3 inch x pipe kit for an 02 Silverado , had to cut it down to fit my headers!