Check out my channel man , tons of other videos on there on all sorts of Ls Stuff ! This setup is 228R cam 241 heads milled , and ported all the way. Ported so much had to weld them back up , definitely helps top end. TBsS intake with 92mm throttle body 36lb injectors , summit coils , Msd plugs , Taylor wires It’s a flat top 5.3 with about 10.5-10.75:1 CR
Alright So first off I would recommend shooting for 10+ compression. Can achieve that easily with flat tops and milling on some heads for a 5.3. Thinner head gasket as well. Cam spec is Texas Speed 228R cam .600 lift and 110LSA Be sure you buy .660 Dual valve springs Becuz you will pop bee hive springs Set idle at 750 at operating temp and adjust over speed and underspeed to your liking !
Fast forward to 2:15 for the best sound out there !
Sounds freaking great!!!!! Love it
Thank you ! Yeah I think it sounds awesome , I have it tuned perfectly to my liking !
Sounds good 👍👌
Thank you sir ! 👍🏼
@@KidKevi hell yea it is great love my 5.3
What are the motor mods please ? Cam compression and heads and intake setup please thanks sor wanna see more i subbed
Check out my channel man , tons of other videos on there on all sorts of Ls Stuff ! This setup is
228R cam
241 heads milled , and ported all the way. Ported so much had to weld them back up , definitely helps top end.
TBsS intake with 92mm throttle body
36lb injectors , summit coils , Msd plugs , Taylor wires
It’s a flat top 5.3 with about 10.5-10.75:1 CR
Topped it off with .660 dual springs & A good trunnion Kit
ua-cam.com/users/KidKevi
@@KidKevi been subbed thanks man love to see more on 5.3 in the red truck maybe track time and 9ther mods done like the exhaust whole thing 😀 👍
@@jackperry9369 the O2 sensor fix on my channel shows headers , and my fuel line video shows the exhaust set up man !
What muffler
It is the 99-02 single cab truck Speed Engineering True Dual Axle Dump exhaust kit . Had to fab it to work on the obs chassis !
How much timeing did u add
@@freddymenchaca6133 add to what
@@KidKevi when u tuned engine , 24 degrees or 28 degrees advance that's what I mean
@@freddymenchaca6133 I need specifics man , there are various rpm and cylinders air masses where spark can be different , are you meaning at WOT ?
@@freddymenchaca6133 in this clip I’m running about 20 degrees of idle timing , WOT areas I’m running 25
@@KidKevi nice truck sounds strong
Cam spec and what was this video idle rpm again sounds great I'm looking for that grind for my build
Alright So first off I would recommend shooting for 10+ compression. Can achieve that easily with flat tops and milling on some heads for a 5.3. Thinner head gasket as well.
Cam spec is Texas Speed 228R cam .600 lift and 110LSA
Be sure you buy .660 Dual valve springs Becuz you will pop bee hive springs
Set idle at 750 at operating temp and adjust over speed and underspeed to your liking !
Can always hit me up for a tune man !
One last thing , I would run this Trunnion kit ua-cam.com/video/CCVoEKZfS9Q/v-deo.html
@@KidKevi can I send computer and you tune to my specs and Pay ya
@@jackperry9369 where are you located ?