How to Install a Red Dot Optic on the Shadow Systems MR920

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • This video is on how to Install a Red Dot Optic on the Shadow Systems MR920 using the parts that come from the factory. A Trijicon RMR is used in the lesson however, the same lesson will apply to other red dot optics.
    Visit the Skull Crush website for cleaning gear and holsters: skullcrush.com
    T-10 Torx Bit: amzn.to/3WYfXbF
    Torque Wrench: amzn.to/3O1CTmg
    Locktite 243 Threadlocker: amzn.to/3hCareO
    Glock 19 Cleaning Tutorial Video: • Field Strip & Clean th...
    I appreciate any support on my Patreon to keep the videos flowing! / skullcrush

КОМЕНТАРІ • 17

  • @SkullCrushInc
    @SkullCrushInc  9 місяців тому

    🇺🇸Thanks for watching!
    My Cleaning Gear & Holsters here👇
    skullcrush.com

  • @smrlamam5147
    @smrlamam5147 6 місяців тому +2

    clear talking and directions. Well done

  • @jontest5718
    @jontest5718 Рік тому

    Just an FYI. I purchased one of these pistols and already owned an rmr type 2. Using the largest spacer, the rmr did not want to fit on the slide. I used a modest amount of pressure before I backed off and acknowledged something was off. I am a mechanic, and was at work,so I took the spacer over to the lapping plate and removed a small amount of material off of the face that would touch the rmr. A few back and fourths,taking my time and only removing a little material, the rmr finally snuggly fit onto the slide. I attempted moving it forward and backward to confirm there was no slop, all good.

  • @jwilson801
    @jwilson801 Рік тому +1

    Thank you for the valuable info!

  • @MrPbarnett76001
    @MrPbarnett76001 Рік тому +1

    This is great information. Thank you!!!

  • @exmann03
    @exmann03 Рік тому +1

    Great video skull crush. Your cleaning videos have been so helpful! Do you think you’ll ever make a a how to clean an AR and AK?

    • @SkullCrushInc
      @SkullCrushInc  Рік тому

      Not sure. Maybe sometime down the road. Thanks

  • @kylethomas6165
    @kylethomas6165 Рік тому +1

    Thanks for doing this!

  • @mikelooper6422
    @mikelooper6422 Рік тому +1

    Very informative.

  • @FelixReno
    @FelixReno Рік тому +1

    Great video

  • @kinkyJRoss
    @kinkyJRoss Рік тому

    Very nice. I think I’ll order one

  • @jogo7973
    @jogo7973 7 місяців тому

    I have SS mr920 getting ready to buy rmr. Thanks for video, question i have is what about the seal plate for waterproofing the battery, is it not needled on the mr 920?

    • @SkullCrushInc
      @SkullCrushInc  7 місяців тому +1

      Not in my opinion. Not unless there is a screw hole that extents past where the optic seal makes contact with the mounting surface.

  • @davidm5548
    @davidm5548 Рік тому

    Are the cover pate screws reverse threaded. Sure looks like you were tuning clockwise to remove

    • @davidm5548
      @davidm5548 Рік тому

      Ah later in the video you mention the camera is reversed.!

  • @kalebrodriguez2126
    @kalebrodriguez2126 10 місяців тому

    What type of watch do you have in that video!?

    • @SkullCrushInc
      @SkullCrushInc  10 місяців тому

      It’s this G-Shock: amzn.to/46MKwW8