How to Build this Magnificent Table Saw with SIMPLE Tools!
Вставка
- Опубліковано 11 лют 2025
- Videos auf Deutsch: / @coselb
Step by step build series: • How to build a Table S...
In early 2017 I felt the urge to build a new table saw. For materials I decided to use mainly plywood. Plywood is stron, dimensionally stable and wear resistant at the edges. For the Motor of the saw I used my Bosch PKS 66.
The most interesting feature of this saw is the trunion tilt mechanism. Though it requires some accuracy and planning to make this mechanism actually work, it allows the saw blade to stay at it's place at the surface of the table even when the saw it tilted. The secret is that the trunions allow for a tilting axies that is excatly in plain with the surface of the table top.
Werkzeug das ich empfehle:
Oberfräse groß: amzn.to/2fGmHva
Oberfräse klein: amzn.to/2t2dErX
Fräser: amzn.to/2fGo90A
Hebelzwingen: amzn.to/2lXDfAc
Tauchsäge (günstig und echt super!): amzn.to/2po3l1p
Akkuschrauber: amzn.to/2r3zXKg
Schlagschrauber + Akkuschrauber: amzn.to/2pB1x09
Kreisschneider: amzn.to/2MuQthK
Kappsäge: amzn.to/2kMNfaA
Handkreissäge: amzn.to/2r3cgSo
Winkelschleifer: amzn.to/2pCA8f4
Exzenterschleifer: amzn.to/2lzlGpC
Flachdübelfräse: amzn.to/2lXMRLd
Bandschleifer: amzn.to/2pnTzMS
Spindelschleifer: amzn.to/2kTLFnj
Kombinationswinkel: amzn.to/2m33F3t
Tauchsäge (gute Absaugung): amzn.to/2m3iza5
Kompressor: amzn.to/2qvoLtF
Bohrmaschine: amzn.to/2kMTRpc
Schweißmaske: amzn.to/2kJhaVU
Rotes Sägeblatt: amzn.to/2lUVKBI
Schweißelektroden: amzn.to/2lULolr
MAG-Schweißgerät:amzn.to/2yfUUKl
Winkelgetriebe: amzn.to/2pCGUlf
Zimmererdreieck: amzn.to/2qXF56l
Leim: amzn.to/2lUVJxC
PU-Baukleber: Debratec Power Kleber - selber googeln
5-min Epoxy: amzn.to/2q8rLcd
Maschinen-Gleitmittel: amzn.to/2pklTyb
Staubmaske: amzn.to/2re4xoJ
Eisenbohrer: amzn.to/2usvAxi
1:44 I like how you DIY'ed a table saw to make parts for your DIY table saw
"Кипит мой разум возмущённый", вот это станок, вот это МАСТЕР!!! Браво
Very clever build all around, but especially those trunnions and the height adjustment mechanism.
I was just thinking "well that's a table saw Matthias would love !". And here you are.
I was just about to comment that maybe he shouldn't paint it green, just in case it gets mistaken for something a certain famous UA-cam builder might make.
I don't see any mechanic locks the blade tightly after adjustments
I'm no expert, but I expect that the nature of the treads and rod should keep the saw cradle in place wherever the rotation stopped.
bueno, no seria muy complicado hacer un mecanismo de bloqueo en la propia manivela./ Well, it would not be very complicated to make a locking mechanism in the crank itself.
If there’s anything you can’t do, you’ll master that too whenever you want to. You’re ingenuity and execution stands tall. Brilliant and thanks for sharing.
Brilliant indeed!
Definitely the best home tablesaw I’ve seen so far....your trunion machining technique is genius!
Perfect center.
I mean, whenever you want to cut 90° to 45 ° you don't nees to change the zero clearance and the zero clearance itself already at the best form. Less gaps. Just perfect, aweaome. Amazing work.
After seeing how you placed the axis at the surface of the table it seems so obvious and simple. Thank you for sharing, I was educated and entertained. Great Work!
Alexander Dyer passa as medidas pra mim fazer uma pra mim
Alexander Dyer
Great work
A wonderful design and finished project. My 50 yr old table saw died the other day. This is the perfect replacement for the kind of projects I make. Thanks!
THIS IS THE BEST I'VE SEEN ON THE SUBJECT SAWING TABLES ! PERFECTLY !!!
Nice work
Awesome job ! I am an engineer and used to work precise with metal.... but how did you get it spot on right - the pivot point is perfect! Blade passes through at 90 or 45 degree at exactly the same spot!!!! Well done !
Ingenious to pivot the saw around where the blade exits the table top, so it's always a zero-clearance top. We watch you use simple tools: router, drill press, jig saw, circular saw. Pretty complex, though. Lots of skill needed in those arc slots to tilt the saw. Great engineering! Very inspiring.
Que inteligência e habilidade pra construir algo de tamanha complexidade e qualidade. Parabéns!
Another example of raw German engineering. Awesome job mate!
Hello Cosmas, thank you for replying to my email, I was inspired by your project to make my table saw, finally I was able to finish my project after 4 months conducting tests and improvements, thank you for sharing your knowledge. Great design and beautiful work that did. hug
Rafael Ribeiro now share urs lol. It can’t hurt. Of course our won’t look as fast as his though lol.
Hat off to you man
I am also machanical person and I knew that which you done that is a not simpal work many creater are in tha word but your work are so fine and strong as long life God bless you man
Show de trabalho!!! Quanta habilidade e COMPETÊNCIA, fiquei impressionado com a criatividade e capricho no que faz, é de encantar os olhos!!!
Obrigado por compartilhar comigo seus conhecimentos.
Abraço aqui do Brasil 🇧🇷
Мастер... Браво.. Чётко...
it's amazing, really well planned even though i will only buy the table saw but i like to watch this from start till the end, it's not always about the money but the fun of building it! great job!!
Excellent video. I give you 5 stars bro.
Buen trabajo. Parece que hay gente que esperaba que la hicieras con martillo, serrucho y escuadra jaja
Nice mechanism. But... Without riving knife? You are a real hero! ))
Nice work. I have started saving money to acquire the many "simple" tools needed !!!
Lool
Hahaha
“Simple tools”
Proceeds to use a drill press and $200+ worth of professional clamps
The lifting/tilting assembly is engineering level 10.
I am not on this level.
Great video.
Some plans for this build would amazing, or even a more in depth video taking us through step by step
what I did was downloaded it and paused between the steps. That could help...
This is intellect + resources= invention that works around the big firm.
Самый крутой подъемный механизм, очень понравилось что диск всегда выходит в одну прорезь!
добрый день а вы не знаете какие размеры или где найти чертеж
@@ЮрийЦой-с1э думаю нужно брать пилу и делать под свою пилу операясь на данное видео.
Mir gefällt die Art und Weise, wie Sie die verschiedenen Maschinen mit den von Ihnen hergestellten Werkzeugen vervollständigen.
Really nice! The only things I would do different would be to use coarser thread ready rod so you don't have as many rotations on the handle and a cam handle for the fence lock. I also found a can of Tremclad rust paint gives a great finish.
One of the most beautiful home made table saw I seen 😍
Great concept and execution with one mention to make regarding safety, install the kickback guard!
I was just thinking that too
Too good man. You covered carpentry work, blacksmith work and electrical work. All in one
Love the build! Turned out great. And the irony of using a tablesaw as a work bench to build a tablesaw :)
Keep em coming
Молодец мужик, классный станок придумал!
Simply amazing. Much better than other professional table saw. The only negative thing, is that requires a lot of engineering and pratice skill to be build by a noob guy like me 😂
Genius
The best DIY table saw i have ever seen 👍🏼
С этой идеей сделал себе пильный стол под пилу Hammerflex CRP 900A. С учётом невысокой квалификации и примитивного инструмента на него ушло больше двух месяцев. Себе на удивление - получилось! Управление подъёмом и поворотом - по-своему, попроще. Но сама идея заворожила и провела через все трудности. Теперь наслаждаюсь!
Юрий Курский я сделал такой же стол, но у меня диск при 90 и при 45 не попадает в один и тот же прорез. Где ошибся???
@@olel7431 Прежде чем делать прорезь на чистовой заготовке столешницы, я помучался с настройкой на черновых заготовках. Во-первых, добился, чтобы ось вращения при наклоне диска точно совпадала с плоскостью столешницы. Иначе при наклоне прорезаемая диском щель будет смещаться в сторону. Во-вторых, радиусы поворота с обеих сторон механизма при наклоне постарался установить как можно точнее одинаковыми. Иначе плоскость диска будет уводить, т.е. линия пересечения её со столешницей изменит угол по отношению к одной из сторон стола. Кроме того, в финале обнаружилось, что после установки пилы плоскость диска не совпала чуть-чуть с перпендикуляром к стороне столешницы. Хорошо, что винты, крепящие корпус к механизму, позволили подстроить этот угол. Это тоже влияло на неизменность положения диска в щели столешницы.
DAMN!!! YOU'RE ONE HELL OF A CRAFTSMAN!!!!!
Congratulations! You produced extremely. This is the best diy table saw I have ever seen... Good luck man...
This is really one of the nicest, smoothest blade lifts that I have seen. Very nice friend, very smooth idea.
Такие люди как вы облекчяют жизнь простым людям за кто боль шое спосиба вы молодец
Great Job. Given the decline of corded power tools to battery tools. And the inexpensive cost of a nice skill is saw. This is definitely a great option.
Bye far the best home made table saw I've seen on you tube well done mate I'm going to make one now.
Perfect work!👏👏👏 German engineering in action!👍
Лучший самодельный распиловочный станок, который я видел.
Точно. Жаль ,что как ни старайся,а класс точности очень низкий всё равно остаётся.Даже точно выставишь поначалу, то через небольшое время собьется.Для серьёзных работ (обьемных)по столярке не пойдёт. А так для себя хороший.
Идея стола великолепная, но появится выроботка от вибрации стола на соединительных узлах (поворотных) и будут покрешности. Станина сама "жидковатая".
На поворотных узлах использовать пластик.
@@Сергейсев.Урал это пила чисто для хобби. Любой даже самый малозанятый контрактор купит себе пилу фабричного производства. Это для людей, у которых есть время, есть желание чтото поделать и нет желания тратиться на нормальную пилу, чтобы та потом включалась одир раз в год - т.е. для хобби.
То же самое касается и остальных комментариев о поворотных узлах, которые износятся. Он (самодельный станок) не предназначен для частого использования. Он нужен, чтобы был, если вдруг надо одну доску распилить, после дождичка в четверг. И самое главное, нужен он как проэкт сам по себе. Процесс постройки станка важнее полученного результата.
A riving knife attachment would have given me 120 marks out of 100 for now i ll rate this video 99.99999999999percent out of 100 and a very impressive video hatts off from India
Impressive. I'm glad you started using push sticks, though. I was getting concerned about your first cuts.
außergewöhnlich, outstanding, bravo fuera de serie.
Melhor que as de fábricas seria bom fazer umas dessas pra vendas ou encomendas parabéns amigo muito bom
خ
you play wood it looks very easy huh, really creative you play wood it looks very easy,👍👍
Excellent job! You are a master in that! Congratulations!!! Do you have the plans to make it?
Amigo tu diseño está genial, gracias por compartir tu trabajo, con esto podré hacer mi mesa de corte y estoy de cero.
Saludos desde Colombia.
Simply amazing! Do you have plans for this particular build? ty.
Superb finesh table saw very very good nice bro good luck
I respect the engineering. Amazing project. But it's definitely not with the "simple tools"
Very true!
@@ash1spook But it´s amazing isn´t it? 😁
Honestly I disagree, it is a circular saw, jig saw, router, power drill, chisel, hand saw, and a hammer. Pretty darn simple. Especially since you could technically replace all the the saws with just the jig saw.
His materials (the bearings, threaded rod, plywood, and screws) are also super simple.
I 100% agree, kinda clickbaity if you ask me.
@@FatherEldritch what the heck, do you want it to be built with a rock? :D He is literally using a circular saw, a drill (you don't need a drill press for this, just a guide made of wood), router, chisel, hammer, hand saw and a wise. Hand held circular saws like this can be bought with less than 50 dollars and same with the router. So like basic garage tools.
Outstanding. Gives me Ideas for my old craftsman/ DIY wooden hybrid table saw. Thanks
Very interesting! Having a kind of cheap but good Skil circular saw I'm very tempted to transform it into a table saw like this one! But I'm afraid of the tilting mechanism, could you share the plans for it, please?
Thank you!
U can probably buy the pla s for tese fir little more than 10 or 20 dollars bro. Most of the guys who buikd tese now sell their plans with templates aswell so u can make it easy to buikd for us now. Check te description of te video man. He night have the olans for sale online there. U can go to websites and buy them cheap enough even if this lad don't do it.
Мужик, ты гений!
Thank you for taking the time to film, edit and post this build. It was really fantastic to watch you build this saw!.
Building a table saw from another table saw lol
I loved it great job
Muito bom mesmo criatura parabéns mais um inscrito sucesso pra vc meu amigo
Olha só em, nosso companheiro ae
What an exciting project to look forward to , thank you for sharing your creativity with people , God bless.
good job. do you have a construction project / technical drawings and would you like to share?
То, что я давно хотел увидеть!!! Спасибо, товарищ!
After having watched the whole video I noticed that you made a video about this table saw before.
I missed that somehow, so i took a look now. I'm very impressed and according the comments, I'm not the only one.
Do you have plans (for sale)? Some parts will have other measurements for other circular saws than you have,
but the principle of the mechanisms should be for all circular saws the same.
Hans de Groot xytifi kUvfihvc,yc
Very, very, very nice build and engineering.
Clever and aweasome! This turns out great.
How do you prevent the tilting mechanism to move with the vibrations?
Thanks! It does not move.
I'm very enjoy to watching your video. You are a true master craft!
Maravilhosa máquina!
Parabéns você é o cara !
Excellent job. You are great in your work.
Sem palavras... realmente um trabalho de mestre, meus parabéns.
Wel said my man. Welk said. This dude is a master craftsman. Salute to u sir for recognising talent when u see it. Some ppl are blind, u know what I mean.. Big up to ya mayne.
Мужик, ты супер. Молодца
It's a truly magnificent build. But there is no way we can make it with simple tools, as i read in the title. We need a fully equipped workshop for this.
U are genius sir thank you for this Chanel Its very amazing
its only because this is such a beautiful project that i feel the need to say this: use a coat of primer before you paint it green! it will look so much better!!!!!!!!!!!!!!!!!!!!
handdancin It’s probably that paint and primer in one stuff..
+me 2 p pu ú ớ
Very simple and intresting... thank you for sharing
nice and solid build. Love it!
Ай красавчик, ну ты даёшь, такую вещь своими руками сотворил, молодец, дерзай дальше.
HI I am the Inventor Luis Burgos I write to you from Spain, I really liked your work, you are very good at your job, congratulations, I wanted to ask you if you could please send me the plans to make me the same model.
Thank you
this guy has got some skills!!!
Do you have plans to buy for this? Would love to buy them.
You need a riving knife. :) Great build!
Spot on mate, was thinking the same thing. We call it a Kerf in Australia (fun fact), and is a more essential safety feature than a hand guard or safety switch in my not so humble opinion
@@loknut6614 in my part of Australia the kerf is the amount of material removed by the blades teeth.. it has nothing to do with the riving knife which moves with the blade or a splitter which has a fixed height..
@@UnacceptableViews yes, I have heard that terminology as well, I think they call the Riving knife a kerf in NZ as well as parts of Australia.
outstanding DIY project
I’m lost, where are the simple tools u’re referring? This is amazing dude 👍🏼
Nevermind the tools. You need experience too.
супер.гениально.самое лучшое что я видел.практически все с дерева👍🙂
Hmm. Wait.
Why aren't they ALL like that?
pocket83² Right!?
👍
indeed..!
عمل فى منتهى الروعة والاتقان
تحياتى من مصر
Really clever! Getting the axis for the trunnion like that took some thinking! I'm guessing you passed all your geometry classes. Having the lift / tilt mechanism mounted to the cabinet instead of the top is smart too!
I wonder why so many major manufacturers don't do that? Oh wait... yeah now I remember.
It should be fun waiting for the safety trolls' comments on this one. Those unorthodox circ-saw techniques might cause some wet panties. ;-)
The system is wobbly as fuck like this. Only the threaded rod and the precision of the wood guides limit the wobble... Making that stuff precise enough for zero movement would cost more than most table saws do.
beatifully set of mechanism with one blade out gap. georgeus.... you are kinda genius in this design.. thanks... and i think i need to make it too
Can you please drawings of this design?
I am impressed........ Too job...... You've answered a lot of questions that has had my project stalled
GENIOUS! but watch your hand😉
A real artist! Compliments!
Excellent build. Very nice design!
Do you need a pressure lock to keep it from vibrating out of settings?
Hi, no.
Excelente!!!!
Saludos desde Argentina
You should sell the plans, make some money on it, you deserve it.
totally agree!
i was about to ask where can i get the plans. LOL
Awesome project and nice set of tools man! Toll! Sehr gut!
Cosmas you beats Matias:):):)
Arman Seric I absolutely agree with you
I don't agree, although I totally like the resulting table saw, I think Matthias' video's are more educative.
SAFETY: Matthias corrects, or explains himself when he does something stupid, or when something goes wrong. Although you can see small accidents happen in Matthias' workshop, he rarely hurt himself because he takes better safety precautions. If you have/want million of viewers you better set a good example.
DESIGN: Matthias shares more of his design / experiments.
and both are best than you man...
ЛАЙК!!! сделал себе подобный стол,теперь наслаждаюсь работой))) СПАСИБО за идею!)))