Installing TP-Link AC1300/600 on Kali Linux
Вставка
- Опубліковано 18 вер 2024
- Unlock the power of your TP-Link AC1300/600 Wi-Fi adapter with this STEP-BY-STEP tutorial on setting it up on a Kali Linux system. This video is your one-stop guide to transforming your adapter into an effective tool for network penetration testing and ethical hacking.
Throughout this tutorial, we'll break down the process step-by-step, from configuring your system and installing the correct Linux headers to the final stages of installation and setup. By the end, you'll be ready to use your Wi-Fi adapter to its fullest potential, conducting network penetration tests with ease and efficiency.
Network Adapter: www.amazon.in/...
Driver Link: github.com/cil...
For more informative and practical tech content, remember to subscribe to us and turn on the notification bell. If you find this video helpful, please consider giving it a thumbs up and sharing it with others.
Have a question or suggestion? Drop a comment down below. Your feedback fuels our content. Stay tuned for more exciting tech guides and tutorials. - Ігри
Thank so much. Finally i already connect my Linux Mint to TP Link T3U Plus
Are you able to capture handshake ?
after many strugles i finaly made it with your help bro thankyou so so much
Thanks a lot dude. İts working
thank you so much, work in my tp link
facing error in installing headers
E: Unable to locate package linux-headers-6.3.0-kali1-amd64
E: Couldn't find any package by glob 'linux-headers-6.3.0-kali1-amd64'
Thanks bro it's working 👍🏻
My t3u plus is working without any driver installation...but it's not capturing WPA handshake
bro you are awesome i will support you if you make more videos
absolute genius dude it really worked out for me!
This does not work.
FUCKIJNG LEGEND THANK YOU!!!!
still didnt work. Why wont tp-link just make a damn driver for it?
pls help !!! I'm using the same wifi adapter but it is giving a internet speed of 30-40 mbps while my laptop's integrated adapter is giving 80mbps and also the number of wifi access points shown through this external adapter are more or less similar to the number of wifi access points shown through my laptop's adapter however the strength of the signals is a bit higher through the external adapter
Does Ac1300 supports monitor mode & packet injection?
Yes
unable to locate package linux-headers -6.3.0-kali1-amd64
while I run command apt install Linux headers (Uname r)
try just without u name r
sudo apt-get install linux-headers
Unable to locate package linux headers
in iwconfig wifi is showing but in network section wifi is not able to show any network. no available network found
Could not open lock file /var/lib/dpkg/lock-frontend - (13: permission denied)
Unable to aquire dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root ?
This is what is saying brother
did u add sudo before the command
@@jonathinporterfield4863 yea I didn't but I've got the solution man thanks 👍🏻 I read through the github page for installing it
My system is showing problem while compilation
My TpLink T600U nano appears in the list when i type "lsusb" on Kali. But it does not work. I am new to Linux. I am using ethernet cable for inernet everytime and i want to use the WiFi adapter. I even called TpLink customer care and i was told there are no drivers for Linux. Can i follow the same procedure to install the drivers? Kindly reply.
Hello
Don't scam people! Money does not come from air
2 baar phele Kiya tha tab ye sari commands chal rahi thi kal mene firse Kali install Kiya to ye commands chal to gyi wifi ka bhi a gya par available network Mai ek bhi network show nahi ho rha hai phele ye problem nahi aati thi
ac1300 support monitor mode or not. how to install driver of this
This doesn't work for latest kernel 6.6.9
I have the pcie version that shows 14e4:43a0 rev 03.
I can't find anything that work's.
Can you tell me if this will work for me, or provide any information please?
It seems you have a Broadcom BCM4360 wireless card. Follow the below-mentioned steps:
1) Broadcom drivers are proprietary, so you need to include the "non-free" repository in your sources.list.
echo "deb http.kali.org/kali kali-rolling main contrib non-free" | sudo tee -a /etc/apt/sources.list
2) Update Repositories: sudo apt update
3) Install Broadcom Drivers: sudo apt install broadcom-sta-dkms
4) Unload Conflicting Modules: The broadcom-sta-dkms package will blacklist most of the generic Broadcom drivers, but to be sure, unload any conflicting modules.
sudo modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
5) Load the wl Module: sudo modprobe wl
And by this point, your wireless should be up and working.
@@p0is0n_9 sorry for replying late, I was having problems with connection but it turned out my router extender was the problem.
I tried connecting to the main router and it is working flawlessly in all mode's!
Thank you so much.
Much respect from Australia
@@p0is0n_9 I just finished testing and it seems to refuse monitor mode? 🤔
Do you have any suggestions?
Sure. You can type the following commands to set the monitor mode manually.
1) Stop network manager: sudo systemctl stop NetworkManager
2) Put the wireless adapter into monitor mode:
sudo ifconfig wlan0 down
sudo iwconfig wlan0 mode monitor
sudo ifconfig wlan0 up
3) sudo iwconfig wlan0 to check of its get into monitor mode. You will see something like, Mode:Monitor in the output.
4) sudo systemctl start NetworkManager
And all done. Let me know if it works for you
@@p0is0n_9 Error for wireless request "set mode" (8B06) :
SET failed on device wlan0 ; operation not supported.
I also get experimental driver error sometimes.
I guess it's just a proprietary thing.... I'll definitely look into things more when buying, especially chipsets and driver's.
Thank you heaps for your help.
If you think if anything else let me know please and thanks again
can we use any old router as a wifi adapter???
hi friend
i try it on kali2024-2 and 2022-2 and i can change to monitor mod but i cant get any network when i use airodrup or wifite
what is the problem ..... please help me
Your adapter use a monitor mode
Sir nhi ho rha.. Bol rha hai are you root? ...
anyone tried to use this adapter with kali nethunter ???
/bin/sh: 1: bc: not found
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/6.5.0-kali3-amd64/build M=/root/rtl88x2bu modules
make[1]: *** /lib/modules/6.5.0-kali3-amd64/build: No such file or directory. Stop.
make: *** [Makefile:2392: modules] Error 2
What should i do to fix i am using ac1300
download "bc" by trying "bc" and "y" and "y" that work for me
Bhai kaam to kre pr fir mera kali hi crash kr gya eske baad reboot krne k bad open hi nahi ho rha 😢
not working bro
Hello Sir ,
Please Help me.
Tp Link Archer AC 1300
Kernel = 6.3.0-kali1-amd64
Not working Sir😢
100% Done Sir....
It's just a Stunning video
Thank you so much sir 🙏
not working for me
┌──(root㉿kali)-[/home/kali/Desktop/rtl88x2bu]
└─# make
/bin/sh: 1: bc: not found
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/6.5.0-kali3-amd64/build M=/home/kali/Desktop/rtl88x2bu modules
make[1]: Entering directory '/usr/src/linux-headers-6.5.0-kali3-amd64'
/bin/sh: 1: bc: not found
getting errors all around :(
not worked
Whats the issue you facing?
unable to locate package linux-headers -6.3.0-kali1-amd64
while I run command apt install Linux headers (Uname r)@@p0is0n_9
it's not working for me and giving error on compilation
"/bin/sh: 1: bc: not found
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/6.5.0-kali3-amd64/build M=/home/kali/Desktop/rtl88x2bu modules
make[1]: Entering directory '/usr/src/linux-headers-6.5.0-kali3-amd64'
/bin/sh: 1: bc: not found
CC [M] /home/kali/Desktop/rtl88x2bu/core/rtw_debug.o
/home/kali/Desktop/rtl88x2bu/core/rtw_debug.c: In function ‘dump_drv_version’:
/home/kali/Desktop/rtl88x2bu/core/rtw_debug.c:45:69: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time]
45 | RTW_PRINT_SEL(sel, "build time: %s %s
", __DATE__, __TIME__);
| ^
In file included from /home/kali/Desktop/rtl88x2bu/include/drv_types.h:60,
from /home/kali/Desktop/rtl88x2bu/core/rtw_debug.c:17:
/home/kali/Desktop/rtl88x2bu/core/rtw_debug.c:45:51: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
45 | RTW_PRINT_SEL(sel, "build time: %s %s
", __DATE__, __TIME__);
| ^~~~~~~~
/home/kali/Desktop/rtl88x2bu/include/rtw_debug.h:254:46: note: in definition of macro ‘RTW_PRINT_SEL’
254 | _seqdump(sel, fmt, ##arg) /*rtw_warn_on(1)*/; \
| ^~~
cc1: some warnings being treated as errors
make[3]: *** [/usr/src/linux-headers-6.5.0-kali3-common/scripts/Makefile.build:248: /home/kali/Desktop/rtl88x2bu/core/rtw_debug.o] Error 1
make[2]: *** [/usr/src/linux-headers-6.5.0-kali3-common/Makefile:2059: /home/kali/Desktop/rtl88x2bu] Error 2
make[1]: *** [/usr/src/linux-headers-6.5.0-kali3-common/Makefile:246: __sub-make] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-6.5.0-kali3-amd64'
make: *** [Makefile:2392: modules] Error 2
┌──(root㉿kali)-[/home/kali/Desktop/rtl88x2bu]
"
plz help ...
you find the answer? same error to me
@@carlosguerra6737 apt-get install bc
Don't know who you are, but thankyou !! LOVE YOU MY GUY, saved me a lot of time@@marioandrei2496
@@marioandrei2496lifesaver