Slide disassembly idea- put you hands and gun inside a clear plastic bag to remove spring tension parts. When they go BOOOOOIING! they wont have anywhere to go, except in your plastic bag.
12:54 "For some of you, it might be a crescent wrench!" Truer words have never been spoken! Why go find a hammer, when a crescent wrench is right next to you? Incidentally, one of the best videos I've ever seen on how to do a procedure like this!
I've tried several triggers in my Hellcat and the MCARBO one is by far the most comfortable and is easily what I consider to be the best of the bunch. Sold the rest and this one remains. Great upgrade!
@@rookiboi26I have the Apex, it is insanely good and I'm more accurate and fast with a sub HCP than with some full sized guns in great part to it. That said, it is not comfortable. I get a little pinch here and there from the safety blade. Have not tried any others on the HCP.
I installed the titanium striker assembly and the trigger and springs into my Hellcat Pro. I could to be happier. It is fantastic. I installed the striker assembly first and it alone reduced my trigger to 4.5 lbs and improved smoothness. Then installed the aluminum trigger and spring. I also adjusted out some of the pre-travel. The aluminum flat trigger is a huge improvement. The Hellcat is an incredible gun with exceptional grip, size, and capacity. For small gun it is easy to keep on target. . However, the 7 lbs stock trigger was a killer. M*Carbo has out-done Apex on this one. It is my opinion that this is as good as it gets.
Great instructional video. Explained everything very well. Took me like 15 minutes from start to finish. No polishing or other touch ups done. Just installed the complete kit. Smooth, crisp 4lbs every time. This is EXACTLY what the Hellcat Pro needed IMO. Everything else on the pistol was just right... Except the dang trigger. Great job MCarbo on the FCG refit!
This is honestly one of the best instructional videos I've ever seen, good lighting, good camera angles, entertaining and good explanations of everything going on.
I just replaced my trigger with the full kit on my Hellcat Pro went together just like the video shows. The only suggestion I would make is when you are reinstalling the safety spring, spend an extra minute on showing the safety button orientation other that than great video and instructions are spot on.
Just got this kit and installed in my hellcat pro, makes a whole world of difference in the feel of the gun and this video makes it stupid simple to install. Got it done in about 10 minutes
Just in time. Just got Pro yesterday. Triggered Glock like which means not great. Love the gun however enough that I’m gonna buy the smaller version this week. May as well doing both at the same time. I concur this is a great no BS video.
It lowered my groups from 4.5-5 inches to around 2.5 once average. Since the trigger is smother and easier to pull my hand wasn’t pulling down to the left as much.
I used Mcarbo parts for my Savage rifles and love the ease of installation and functionality of the items. The kit is on backorder, but I will definitely be upgrading my hellcat soon
Great tutorial, didn't skip any steps or go too far into details that don't matter. Was able to follow along and complete the whole job in half an hour, plus some cleaning time. The upgrade feels great too, can't wait to get to the range!
Amazing video!! From start to finish I was able to completely follow along without getting lost. For never having disassembled a firearm completely, I was able to install this trigger in firing pin with no problem. Thanks!
picked up your guys trigger right after i took home my pro when it first came out. been in love with the trigger ever since, now if only this video existed when i first installed it lmao
Definitely prefer this trigger to other aftermarket ones. I only did the trigger shoe but definitely worth every penny. Only issue I had was I had to back screw out at least three turns for all the way in. Trigger would not reset otherwise.
Once I get this hellcat pro I definitely will buy that kit once I break in however I pretty much enjoy ur video thanks for ur efforts and time demonstrating this to us looking forward to see more hellcat pro kit upgrade
❤BIG THANKS to M-CARBO🇺🇸! I went to their website n bought A kit called SF hellcat triggers spring kit & steel sleeve which has all BUT the trigger and the fire-pin (does have the fire-pin steel sleeve). I just installed it today n cut down 1.2 lbs trigger pull 🎉🎉🎉(from 6 to 4.8, smooth), new pistol, I am HAPPY! PS: I think it’s only $60 w fast free shipping!
BRAVO BRAVO Greatest ever product video EVER! the "special efx" sounds epic! Crap, I guess I gotta get a hellcat so I can have such an awesome experience! Thank you for a great product spotlight and installation video!
Thanks for sharing the knowledge! Also great comedy at the beginning there. Despite this video being very informative, I think it is best if I send mine in for yall to do the work.
What a great videos . I’ve already watched the other one on the channel like 3 times installed my own kit minus the trigger shoe and rewatched this one to see if it was as precise and it was. I installed the Apex shoe since a buddy had an extra one but it didn’t remove as much take up and doesn’t have a set screw. In all honestly if you have other color shoes besides black or an American flag design I would have the M Carbo one in it now. I have the red freedom flag Apex trigger. Please make an extended mag released and slide lock so I don’t have to pay 60$ plus for Apex ones. By far the best upgrade on my Hellcat pro!!!
Good job on the video! No rambling, I'm surprised. Straight to the point with just enough splainin to rather effectively communicate the dissassembly I and assembly. I could have avoided some tinkering if I watched this before I took mine apart a few times. Video looks good as well. Nice. I've got a competitors trigger so I may or may not get that but I'm getting the springs and striker for sure. Thanks
Great Video - looks like a great upgrade. Looks better than the Apex. Once I get some rounds through the Hellcat Pro, I will be order all those parts.....
Awesome tutorial! Had some trouble with the trigger setting screw and it did not stay glued in when I was taking the allen out (pretty sure a screw up on my end. I’ll let you know in a week or so on how the kit upgrade went!
Just installed the striker set along with a DPM recoil reduction system and I’m excited to go try them out. I can already feel a good difference in the trigger just by dry firing it. Still on the fence about getting the actual trigger just because I want this to keep the stock appearance.
Question for the pre travel soo for the least amount of pre travel you want to have the trigger bar as far down as possible then tighten the set screw? Idk why I’m confused about this part. I just shot mine and want less pre travel
Oh, so it sounds like you got the regular Hellcat instead of the Pro model like mine with 15 round mags. I don't know about you but mine came with a mag loader. That seems like that's what you need. On very rare occasions when encountering difficult magazines ,I brace them on a table top and press the cartridges down. You just need strong thumbs.
It is an awesome package too!! It reduced my trigger to 3lbs I love it!
How did you get 3 pounds but he got 4 pounds
Slide disassembly idea- put you hands and gun inside a clear plastic bag to remove spring tension parts. When they go BOOOOOIING! they wont have anywhere to go, except in your plastic bag.
12:54 "For some of you, it might be a crescent wrench!" Truer words have never been spoken!
Why go find a hammer, when a crescent wrench is right next to you?
Incidentally, one of the best videos I've ever seen on how to do a procedure like this!
I've tried several triggers in my Hellcat and the MCARBO one is by far the most comfortable and is easily what I consider to be the best of the bunch. Sold the rest and this one remains. Great upgrade!
Would you say it’s better than the apex trigger. can’t decide what to go with there is so man options wish I could test em all before purchasing.
@@rookiboi26 I don't know that "better" is how I'd describe it, but personally I like the MCARBO feel and function very much.
@@rookiboi26I have the Apex, it is insanely good and I'm more accurate and fast with a sub HCP than with some full sized guns in great part to it. That said, it is not comfortable. I get a little pinch here and there from the safety blade.
Have not tried any others on the HCP.
Any experience with the PRP trigger assembly?. I did the upgrade to my XDsc and really liked it. Thinking about doing the same to the hellcat.
@@j8nkies20 I like the feel of the MCARBO best, but the PRP would be a nice upgrade as well.
I bought the trigger but didn't know I was going to need the HellCat.. brb
I installed the titanium striker assembly and the trigger and springs into my Hellcat Pro. I could to be happier. It is fantastic. I installed the striker assembly first and it alone reduced my trigger to 4.5 lbs and improved smoothness. Then installed the aluminum trigger and spring. I also adjusted out some of the pre-travel. The aluminum flat trigger is a huge improvement. The Hellcat is an incredible gun with exceptional grip, size, and capacity. For small gun it is easy to keep on target. . However, the 7 lbs stock trigger was a killer. M*Carbo has out-done Apex on this one. It is my opinion that this is as good as it gets.
Great instructional video. Explained everything very well. Took me like 15 minutes from start to finish. No polishing or other touch ups done. Just installed the complete kit. Smooth, crisp 4lbs every time. This is EXACTLY what the Hellcat Pro needed IMO. Everything else on the pistol was just right... Except the dang trigger. Great job MCarbo on the FCG refit!
This is honestly one of the best instructional videos I've ever seen, good lighting, good camera angles, entertaining and good explanations of everything going on.
Love the guys at MCarbo
I just replaced my trigger with the full kit on my Hellcat Pro went together just like the video shows. The only suggestion I would make is when you are reinstalling the safety spring, spend an extra minute on showing the safety button orientation other that than great video and instructions are spot on.
Just got this kit and installed in my hellcat pro, makes a whole world of difference in the feel of the gun and this video makes it stupid simple to install. Got it done in about 10 minutes
I'll definitely order this. Mcarbo 's proven itself when their parts improved my Ruger Pc9 performance 3 years ago.
Just in time. Just got Pro yesterday. Triggered Glock like which means not great. Love the gun however enough that I’m gonna buy the smaller version this week. May as well doing both at the same time.
I concur this is a great no BS video.
Please do an updated video for California compliant with magazine disconnect safety.
Yes I second an updated video for the CA compliant Hellcat Pro with the magazine disconnect. Not sure if that comes out easily or not.
Isn’t there a way to remove the magazine disconnect?
New Hellcat Pro owner. Thanks for the very informative breakdown and assembly. I know what my first upgrades will be.
It lowered my groups from 4.5-5 inches to around 2.5 once average. Since the trigger is smother and easier to pull my hand wasn’t pulling down to the left as much.
I used Mcarbo parts for my Savage rifles and love the ease of installation and functionality of the items. The kit is on backorder, but I will definitely be upgrading my hellcat soon
Great tutorial, didn't skip any steps or go too far into details that don't matter. Was able to follow along and complete the whole job in half an hour, plus some cleaning time. The upgrade feels great too, can't wait to get to the range!
Amazing video!!
From start to finish I was able to completely follow along without getting lost. For never having disassembled a firearm completely, I was able to install this trigger in firing pin with no problem.
Thanks!
picked up your guys trigger right after i took home my pro when it first came out. been in love with the trigger ever since, now if only this video existed when i first installed it lmao
Definitely prefer this trigger to other aftermarket ones. I only did the trigger shoe but definitely worth every penny. Only issue I had was I had to back screw out at least three turns for all the way in. Trigger would not reset otherwise.
Once I get this hellcat pro I definitely will buy that kit once I break in however I pretty much enjoy ur video thanks for ur efforts and time demonstrating this to us looking forward to see more hellcat pro kit upgrade
Can’t wait to get mine, I’ve looked extensively through the different brands and this one seems to be the best 🇺🇸.
❤BIG THANKS to M-CARBO🇺🇸! I went to their website n bought A kit called SF hellcat triggers spring kit & steel sleeve which has all BUT the trigger and the fire-pin (does have the fire-pin steel sleeve). I just installed it today n cut down 1.2 lbs trigger pull 🎉🎉🎉(from 6 to 4.8, smooth), new pistol, I am HAPPY! PS: I think it’s only $60 w fast free shipping!
Very nice presentation. I'm sure Chris is happy with it too.
Amazing vid….fricken amazing!!! Thank you for the amount of attention u gave to the little things. Thank u sir! 👍🏾
the level of detail on the instructions it comes with is just perfect\
Holy smokes what an improvement! Also, this video was tremendous, guided me all the way through the whole process. Thank you.
Given mcarbo finds all these stuff that needs to be upgraded. This makes the max 9 look more worth it
BRAVO BRAVO Greatest ever product video EVER! the "special efx" sounds epic! Crap, I guess I gotta get a hellcat so I can have such an awesome experience! Thank you for a great product spotlight and installation video!
Thank you mcarbo for the awesome gun video
❤Much better than ur last installment video! Ur website shows this kit is still in back-order. When do u think it would be available again??
Never mind, just bought ur springs & s sleeve kit, and installed. Cut 1.2 lb trigger pull down to smooth 4.8 lb on a NEW pistol! I’m a HAPPY man🇺🇸
I have all the parts....now I want the darn Tshirt !!
Thanks for sharing the knowledge! Also great comedy at the beginning there. Despite this video being very informative, I think it is best if I send mine in for yall to do the work.
Just a thought, I wanted to upgrade everything that’s in this video EXEPT for the trigger itself is that possible ?
Great detailed video. Thank you for sharing Mcarbo!
What a great videos
. I’ve already watched the other one on the channel like 3 times installed my own kit minus the trigger shoe and rewatched this one to see if it was as precise and it was. I installed the Apex shoe since a buddy had an extra one but it didn’t remove as much take up and doesn’t have a set screw. In all honestly if you have other color shoes besides black or an American flag design I would have the M Carbo one in it now. I have the red freedom flag Apex trigger. Please make an extended mag released and slide lock so I don’t have to pay 60$ plus for Apex ones. By far the best upgrade on my Hellcat pro!!!
U just saved my from buying a tyrant cnc trigger and offered me upgrades at the same time 😂🎉 ❤
Just got the HC Pro. Not sure of your age but like your talk. Good job.
Good job on the video! No rambling, I'm surprised. Straight to the point with just enough splainin to rather effectively communicate the dissassembly I and assembly. I could have avoided some tinkering if I watched this before I took mine apart a few times. Video looks good as well. Nice. I've got a competitors trigger so I may or may not get that but I'm getting the springs and striker for sure. Thanks
Oh, pointing out where to polish is very very helpful, thanks again.
Enjoyed the video Ken
I LOVE MCARBO BABY! GOOD VIDEOS . SAY HI TO KRIS FOR ME!!!
Doing mine today!
Thank you!!! Great video very helpful 👍
Great Video - looks like a great upgrade. Looks better than the Apex. Once I get some rounds through the Hellcat Pro, I will be order all those parts.....
Awesome tutorial! Had some trouble with the trigger setting screw and it did not stay glued in when I was taking the allen out (pretty sure a screw up on my end.
I’ll let you know in a week or so on how the kit upgrade went!
You guys do amazing video's! I have purchased several of your kits and they work awesome. Will definitely buy more!
THANKS MAN.!!
GREAT VIDEO.!!
Love all the MCARBO parts for the Pro, good instructional video! Side note, this dude loves to say little hole, big hole and nipple!
Thanks Ken! Just wanna say, that’s a thick ass boiiii
Manual safety video link does not work
With this titanium striker can i port my hellcat pro and the striker?
Just installed the striker set along with a DPM recoil reduction system and I’m excited to go try them out. I can already feel a good difference in the trigger just by dry firing it. Still on the fence about getting the actual trigger just because I want this to keep the stock appearance.
Excellent video!
Does this full upgrade work for both the older model and the pro model?
Yes this kit will work with both the original and pro hellcat models.
Can you guys make a drop in trigger for the mossberg mc2c Please!!!!
Nice
Question for the pre travel soo for the least amount of pre travel you want to have the trigger bar as far down as possible then tighten the set screw? Idk why I’m confused about this part. I just shot mine and want less pre travel
Is there another option that you may suggest for the recoil spring for the hell cat pro to reduce some of that pop that it has ?
super helpful thx!
Just did this trigger job right now and now I cannot pull the trigger. what do I do to fix this I cannot take the pistol apart anymore
What was the fix
@@jasonmurray9060 i pulled the trigger forward out more instead of trying to pull the trigger , and it worked
I ordered this on Nov 26th. I still haven't received it and emailed them with no reply as of yet.
😂😂😂 The only thing holding it is this pin and God’s will. So true!!!
anybody else have any issues with loading the hell cats mags to full capacity? seems like mine is really tough to get the last few bullets in.
Keep them fully loaded and in about a month, spring tension will lighten, making it a lot easier.
@@tommccormick9290 Thanks I will try that. The only issue us is I can only get about 8 rounds in a 11 round mag.
Oh, so it sounds like you got the regular Hellcat instead of the Pro model like mine with 15 round mags. I don't know about you but mine came with a mag loader. That seems like that's what you need. On very rare occasions when encountering difficult magazines ,I brace them on a table top and press the cartridges down. You just need strong thumbs.
How about the california version particularly the trigger?
What about the rdp ?
Yes will work with the RDP
M chinnnnnssssssssd