Це відео не доступне.
Перепрошуємо.
FCS Hellcat Pro Magwell and extensions install
Вставка
- Опубліковано 26 гру 2023
- Install video for Floyds Custom Shop Hellcat Pro Magwell, plates, and extensions. Note that the Magwell will make marks on your Frame.
Just bought a hellcat pro comp and yeah I need this in my life.
Really changed the look of the whole gun looks nice
Waiting for the green light! They look awesome, great work!!!
I ordered a magwell and two +2 baseplates yesterday and it was shipped today and i should receive Thursday. Cant wait but in a couple weeks i have to order more baseplates.
@@jimb788 right on thank you!!
Absolutely Stunning!!!
Thank you!
Would Vibratite work well on the base plate?🤔
Just got mine for cali! 10rd
I want to buy but, I’ve got a couple questions:
(1) What baseplate do I need for the 15 and 17 Round OEM mags? I want to keep the grip as short as possible, so I don’t want any extensions.
(2) will this install over my talon grip pros?
Thanks! Love your products. Keep up
The great work!
Both our +2 and base plate are the same size so either will work, and be shorter then your 17rnd mags, as our extension is shorter then the one on the 17s. As for your gallon grip, you will need to trim it back a little.
Just ran a couple hundred rounds through the +5 extensions, was dropping them all day for training purposes and noticed one of my set screws backed out and was missing. Do you sell a individual packet of set screws?
Email the office, we will get you sorted
@@floydscustomshop2157thank you just did it! Amazing extensions and mag well btw! No feeding issues whatsoever.
Would it be possible to just dremal down or grind down plastic on stock mags to fit into magwell?
On the 10rnd mags yes, on the standard 15, I wouldn’t recommend it. You could easily cut too much and weaken the plates to the point they could brake under the pressure of a loaded mag
Looking great! When will they be available?
Some time next week
@@floydscustomshop2157say when.
@@floydscustomshop2157Would you recommend heating up the frame with a heat gun before installing the magwell so the teeth grab a little better/easier...?🤔
@@quevas93 I have not tried that, but would not recommend it as you could easily deform your frame if you heat it up too much and have problems
Does the Tyrant CNC +3 baseplate fit with magwell?
@@Stussy2314 looking at pictures, they look to be designed to be the size and shape of the frame. Only our plates and extensions are designed to work with our Magwell as we currently have the only hellcat pro Magwell out. The Magwell is designed to funnel the mag into the frame so in order to make that work properly the extension has to be a slim design
Nice set-up, does the EPS Carry co-witness?
They are nice and low, perfect for backup sights, just wish I could find some black out sights
Cool, thanks
I have a few questions . I purchased this set up . I put the plus 5 on a 17 round mag and it seems to only fit 17 still . I also purchased the plus 2 and put it on a 15 round mag and I can only fit 16 . Any ideas ?
@@969Garage hm, the +5 on the 17rnd mag will get you 20, as the 17rnd mag is just a 15rnd with longer spring and stock extension. Make sure you removed the stock locking plate. And the 15rnd with +2 will get you the 17 but it is a tight fit for the last round. That one doesn’t have a locking plate as they use the spring. Let me know if that helps. If not email us and I’ll get some more info from you and get you working right away
Would you guys ever make a mock extension for California resident?
Yes we are working on them for the ten round mags
Thank you for this question I was looking everywhere for this not a lot of companies think of us sadly
@@floydscustomshop2157on the topic of California do you guys have any intentions or know a company that could do a loaded when up indicator delete?
@@Dsynced_ none I know of, but our base plate for the 10rnd mags just dropped yesterday
@@floydscustomshop2157 nice you guys are hitting the hammer on the nail with these products thank you guys! I just ordered my 10 rd mag baseplates and magwell will be doing a small review for my buddy’s thank you
Any considerations / future plans for more of a EDC version?
This is an edc version, it’s a little wider then the frame but still very concealable and useable. Some EDC style magwells out there are so small they are basically useless
I noticed with the 17rd factory mag the spring follower was on the base upon taking apart the mag, but when installing the +5 it was installed first. What’s the reasoning?
Sorry I’m confused at what you mean. The follower is the plastic peace at the top of the spring that pushes up the bullets. The 17rnd mags (15rnd mag with a stock extension) have a locking plate that holds on the extension. We remove that plate and lock on with the set screws. If you are meaning the direction that the extension slides on, the +5s go on from the back to give the best shock resistance and durability if dropped. The +2s go on front to back only because of spacing issues with the back of the frame. Couldn’t get a solid hold going back to front with the angle of the mag on that extension. But still locks in securely with the screws
@@floydscustomshop2157Thanks I understand now. Placing my order today!
will the mag extension work without the magwell?
Yes
@@floydscustomshop2157if you don’t use the magwell would there be some silver showing from the magazine? Thanks man
@@basket_ball_reels_ um, maybe slightly, I’ve never actually looked at it without the Magwell
@@floydscustomshop2157also one more question. Would you be able to mill a slide on the hellcat pro comp so a Holosun eps carry fits flush so I can get rid of the plate? Thanks Floyd I really appreciate the info!
@@basket_ball_reels_ yes we do that, option is on the order form, if you haven’t bought the comp yet, our porting is better 😜
So am I able to use either the +2 or +5 with the oem 10 round mags or just the 15 and 17?
No, the ten round mags are designed in a way that you can Not add capacity. We make plates specific for the 10rnd mags.
@@floydscustomshop2157so is there any way to add capacity to the 10 rd or only a mag well ? Thanks for the reply
@@Mr.Two4 our plates for the 10rnd mags will allow you to use the Magwell, but because of the design of the 10rnd mags having the rails go inward rather then outward, there is no way to add capacity on those mags
Any chance for a magwell for the Hellcat OSP?
No, problem is that the frame is too short, it would need to be a grip extension as well as a Magwell, basically making it the same size frame as the pro and you would have to switch to pro mags
Will this fit on my regular hellcat?
No, the regular hellcat frame is too short, would need to be a grip extension aswell as a Magwell, then you would need to change to pro mags.
Im on the website looking at the pricing for porting my hellcat pro. Is it possable to get it ported and not pay for the extra coating ? Will it be scratched from the porting process?
No it will look clean still with the enforcer porting. This one in the video has not been refinished. The slide and barrel is a carbon steel though so there is some risk of rust if you don’t take care of it. Just a little oil wipe down when you clean your gun should be fine
Do i need to replace the OEM magazine baseplate (10rd mag CA complaint) if im gonna install the magwell extension?if so do you guys offer just the magazine baseplate extension?thanks
We are making the 10rnd mag plates very soon. So they will be available in the next month or so. You can modify the stock 10rnd plate to work in the meantime time. Just chamfer the sides with a file or something. But yes ideally you will change out the plates once we have them so that they fit properly and stick out enough for easy mag changes. The ORM ones will sit inside the Magwell a little
So the +2 baseplates go on the 17rd mags and the +5 on the 15rd mags ?
Both work for either mags as the mag body’s are the same size. The 17rnd mags have slightly longer springs as they come with the stock +2 to make them 17rnd
@@floydscustomshop2157 Thanks for the quick response , I’ve been hearing a lot about the quality of your company , I’ll be placing some orders soon 👍🏼
@@FilthyFirearms thank you very much!
Would you guys ever offer this in fde?
You can request them cerekoted for a extra fee
Do you recommend putting loctite on the screw for the mag well ?
No need for the Magwell screw
@@floydscustomshop2157 What’re your thoughts on putting some sort of epoxy/adhesive when attaching the mag well?
@@FilthyFirearms I would not recommend it. Are you having any issues with it holding tight?
@@floydscustomshop2157 Why not ? And no , I was just thinking on applying some type of epoxy before I put the set screw in
@@FilthyFirearms the set screw will bite into the polymer of the frame and hold the Magwell on securely. You shouldn’t need anything else as long as you follow the video and do it right. Using epoxy will make it permanent and not able to remove without damaging your frame.
Would i be able to use that magwell with my tyrant 3 plus extension on my mag ?
I haven’t seen there extension, but we have the first Magwell for the hellcat pro, and all extensions I have seen are designed to the size and shape of the frame, where ours are designed to work with the magwell. So I doubt that they would work. In order to make a proper Magwell the extensions have to have a narrower profile to fit inside
How long does it take for you guys to ship the items?
If it’s in stock, then same or next business day
I like it! Want one for my Hellcat RDP. Why you ask? Because America.
Legit. Been looking for this for a while. Will the OEM 17 round mags work with the magwell?
You will need to change to our plates or extensions on your mags. The stock plate and extension are too big to fit properly
Got my magwell and +5 extension to put on the 15 round magazine. I haven't ran a mag through it yet but I did notice it's not locking back when cycling the slide. Overall, solid products and I love the way the Hellcat Pro looks now.
@@rgarcia1227 thank you! Mine did start to lock back after running a few mags through but did have some trouble at first. But mine was a new gun so I believe it just needed to wear in a bit
Will the Magwell work with any other mag extensions?
I don’t believe so, all others I’ve seen are designed to the size and shape of the frame and not designed to be Magwell compatible. This is the first Hellcat Pro Magwell that I know of.
Close your eyes..Kermit the frog is telling you how to upgrade your gun lmao 😂
Will the +2 mag extension work on the original Hellcat 11 round mags?
Don’t know, if the bottom of the mags are the same they should
@@floydscustomshop2157 yeah they are the same. I’ll be buying real soon now.
Will that magwell work with 15rd mags?
Yes, you will need our plates or extensions though as the stock plate is designed to match the width of the frame and we need a little more clearance to make the Magwell properly.
Where can get the +5 baseplate
Floydscustomshop.com
Is there any way to get this to czech republic?
Unfortunately we don’t have the licenses required to sell or ship outside the USA. You would need to find and exporter to order through or something
Hey man I’ve tried calling and emailing y’all but I just got my magwell in yesterday and didn’t get the tool for the center screw, for $75 I would expect that, can you send me that or either tell me what exact tool I need plz Floyd
It’s a common Allen wrench for the screw in the Magwell. I believe it’s a 5/32 but I’m not 100% sure. We are closed Fridays but if you call in Monday and hit 2 to go to the shop I can verify for you
@@floydscustomshop2157 ah ok thank you I thought y’all were avoiding my calls🤣🤣
Where can I get one of each?
Floydscustomshop.com
order placed and thanks.@@floydscustomshop2157
Any plans on a Brass Magwell for the Hellcat Pro....?@@floydscustomshop2157
I saw this and said finally… then I went to the sight and saw it was $75. I’m sorry but that is a crazy price for a piece of plastic or aluminum or whatever it’s made of. Guess I will wait longer or until china clones it
We are a small family business and keep our prices as low as we can and competitive with similar products. Sorry that’s it’s a little out of your price range. They do cost to machine and produce, and we have to feed our families as well 😉 thank you for your input, have a great day!
It’s worth the 75 bro. Just got my two baseplates today. Loving it
Will this work with a 10 round mag? you know California.
@@par20crew78 we are working on the 10rnd mags and will have plates for them soon. You can modify the ten round plates safely to work with the magwell
@1luckyguner289 LoL sure in your next life. You get what you pay for