many tnanks for your tutorial, i have a podcast studio usb behringer with uca 200 sound card and gnu linux kx studio system. It's a great little setup production audio,ciao
Can you still use the mixers headphone output instead of using the interface headphone out? I have an old Behringer MX 1804X. It is not a usb mixer. I was looking for a good inexpensive way to connect it and use it with my computer. Thanks for the videos on this product.
If you use the MX1804X's 2-Track RCA in and out sockets, then you can use the Control Room 2-TK switch to your monitors or the switch 2-TK to MAIN to listen them on your mixer's headphones.
Would we need a mixer to transfer recordings of old interviews or university lectures onto a laptop via the Behringer UCA222 or can it be used on its own?
What I'm doing is kinda confusing. I'm playing guitar along with a drum beat app. I'm running the drum beat app from the Galaxy Tab E into a Behringer Xenyx 802 mixer, running my guitar amp into the mixer and jamming along with the drums. I'm running the mixer into my PC and recording what I'm playing. I've been told by many ppl I need an Audio Interface, I just don't know which one to pick.
Will Behringer UCA200 USBAudio Interface allow playrecord songs on UA-cam/stream simultaneously while playing sounds on my DAW at optimal latency? Any ideas?
Yes, the idea is that you replace your PC soundcard with this unit and a mixer, then have your powered speakers or even PC multimedia speaker to the mixer.
Sir how do you get the sound of the computer, beacuse i dont have the speakers, just the spekaers pf the laptops? i have the uca222 input to the output of the of the mixer, but cant hear the sound, the mic is working great.
When you plug the UCA222, it directs audio to its RCA connection for audio input and output, so no audio will go to your laptop speakers. Plug your headphones into UCA222 or your mixer to listen.
Hola mi amigo necesito de su ayuda Yo tengo un mixer American Audio pero no tiene la entrada de in como lo podría conectar Espero que me ayudes gracias mixers 14MXR
RecordingStudio9.com so after purchasing a mixer will i be able to record? I was plugging my microphone(beta 58A) jack into that audio interface headphone port. tell me if i'm doing something incorrect. thank you.
If the 3.5mm jack is line output and not headphone output. Might be possible if headphone, as you need to turn the volume way down. But personally I would not plug it unless it is a line output.
i just received my uca222 and non Usb mixer behringer 502...........First of all i do not have studio monitors but a small bluetooth speaker. So now where do i give the ouput of uca222 to? my bluetooth portable speaker has a 3.5mm jack. Please help......im getting squeel and hissing noise. (2) im usin very cheap rca cable so will the quality differ massively? im using audacity so where can i add or see the asio driver option?i have installed iso4all. looking forward for ur reply to all my question and doubts. thank you.
To feed the UCA222 output to your bluetooth speaker's 3.5 socket, you need 2 x RCA to 3.5mm Stereo plug lead. I don't think Audacity supports ASIO drivers. Maybe someone can correct me. Is the noise in the headphones plugged into the UCA222? or the Xenyx 502 mixer?
are i need a mixer when i just only need a mono output? i just bring my UCA 222 for my piezo trigger , and get the mono jack 3.6mm to single RCA going to input , i think it's no need a mixer right? also for output with single rca to speaker , please help me to find out hehe cause i don't have any mixer here
Is this to trigger drums? Not sure how much gain the UCA222 will have for it's RCA input. I doubt it will be enough to run the Piezo. But I can't be sure.
RecordingStudio9.com yes it's for kick trigger and i place the piezo on the pedal beater not on bass drum head , actually i don't really need the original sound i just only need the signal from the piezo to my VST , hopefully it can be work haha , thanks for the reply sir regards
Your tutorial is super good and clear!! Thank you so much!
many tnanks for your tutorial, i have a podcast studio usb behringer with uca 200 sound card and gnu linux kx studio system. It's a great little setup production audio,ciao
That's a cool little piece of gear...Actually I like that small mixer as well.
It's great inexpensive way to connect any mixer. The Xenyx Q502USB in the video is already a USB mixer and the UCA222 is not required.
thank you very much cool understanding!
Thanks.
How about the outboard processors? How would you integrate them in this setup? If possible, please make a video. Thank you.
Just outstandig🥰🥰🥰🥰🥰🥰🥰
Can you still use the mixers headphone output instead of using the interface headphone out? I have an old Behringer MX 1804X. It is not a usb mixer. I was looking for a good inexpensive way to connect it and use it with my computer.
Thanks for the videos on this product.
If you use the MX1804X's 2-Track RCA in and out sockets, then you can use the Control Room 2-TK switch to your monitors or the switch 2-TK to MAIN to listen them on your mixer's headphones.
Would we need a mixer to transfer recordings of old interviews or university lectures onto a laptop via the Behringer UCA222 or can it be used on its own?
This depends how they are being played back. If a cassette deck, then no. Connect the deck RCA output into UCA222 input.
@@RecordingStudio9 Thank you. They are recorded on minidiscs.
Can i use this to live stream from my dj controller to my phone?
What I'm doing is kinda confusing.
I'm playing guitar along with a drum beat app. I'm running the drum beat app from the Galaxy Tab E into a Behringer
Xenyx 802 mixer, running my guitar amp into the mixer and jamming along with the drums. I'm running the mixer into
my PC and recording what I'm playing. I've been told by many ppl I need an Audio Interface, I just don't know which one to
pick.
Hi, can i put my speacers in mixer "Main Out"? (no there in uca222 2:58)
Will Behringer UCA200 USBAudio Interface allow playrecord songs on UA-cam/stream simultaneously while playing sounds on my DAW at optimal latency? Any ideas?
Is this interface necessary for behringer 302 as i am using with my laptop.
thanks a lot mate
Can you connect the speakers directly to the audio mixer?
Yes, the idea is that you replace your PC soundcard with this unit and a mixer, then have your powered speakers or even PC multimedia speaker to the mixer.
Sir how do you get the sound of the computer, beacuse i dont have the speakers, just the spekaers pf the laptops? i have the uca222 input to the output of the of the mixer, but cant hear the sound, the mic is working great.
When you plug the UCA222, it directs audio to its RCA connection for audio input and output, so no audio will go to your laptop speakers. Plug your headphones into UCA222 or your mixer to listen.
Thanks, in what part of the mixer should i put de headphones, cause im not hearing anything in the PHONES jack of the 802 mixer
Make sure you press down the 2-track to phones button
Hola mi amigo necesito de su ayuda Yo tengo un mixer American Audio pero no tiene la entrada de in como lo podría conectar Espero que me ayudes gracias mixers 14MXR
do i need mixer also to connect it with microphone? Is there any other alternative to connect your microphone?
You can purchase Xenyx 302USB or Q502USB mixer instead.
RecordingStudio9.com so after purchasing a mixer will i be able to record? I was plugging my microphone(beta 58A) jack into that audio interface headphone port. tell me if i'm doing something incorrect. thank you.
One doubt uca 222 device and mixer have any installation or just pugin in laptop . Please clear me !!
Just plug and play
RecordingStudio9.com thanks
cani connect it to my guitar amp which has a 3.5mm jack? so which means i can use an rca to 3.5mm cable. Will it be ok?
If the 3.5mm jack is line output and not headphone output. Might be possible if headphone, as you need to turn the volume way down. But personally I would not plug it unless it is a line output.
i just received my uca222 and non Usb mixer behringer 502...........First of all i do not have studio monitors but a small bluetooth speaker. So now where do i give the ouput of uca222 to? my bluetooth portable speaker has a 3.5mm jack. Please help......im getting squeel and hissing noise. (2) im usin very cheap rca cable so will the quality differ massively? im using audacity so where can i add or see the asio driver option?i have installed iso4all. looking forward for ur reply to all my question and doubts. thank you.
To feed the UCA222 output to your bluetooth speaker's 3.5 socket, you need 2 x RCA to 3.5mm Stereo plug lead.
I don't think Audacity supports ASIO drivers. Maybe someone can correct me.
Is the noise in the headphones plugged into the UCA222? or the Xenyx 502 mixer?
👏👏👏👏👏👏👏👍👍👍👍
are i need a mixer when i just only need a mono output? i just bring my UCA 222 for my piezo trigger , and get the mono jack 3.6mm to single RCA going to input , i think it's no need a mixer right? also for output with single rca to speaker , please help me to find out hehe cause i don't have any mixer here
i mean from piezo i direct to UCA222 using jack 3.6mm to single RCA
Where does the 3.5mm jack fit to?
Is this to trigger drums? Not sure how much gain the UCA222 will have for it's RCA input. I doubt it will be enough to run the Piezo. But I can't be sure.
RecordingStudio9.com yes it's for kick trigger and i place the piezo on the pedal beater not on bass drum head , actually i don't really need the original sound i just only need the signal from the piezo to my VST , hopefully it can be work haha , thanks for the reply sir regards
Well, you can try. If it does send enough signal to trigger the VST Drum, then you are all good. Just kick it harder LOL!
I dont conek to windows xp
Playbck ok.becaous recording troble..daw adobe 1.5