Worked on my 2013 Toyota Venza! Dealership hasn't been able to figure it out for years. They wanted me to pay an arm and a leg to really get into the seats for them to try and find the issue. This video saved me time & money! 🎉🙌
Yep, that what they do same for charging you a kidney just for plugging your car to a scanner. I bought a code scanner on Amazon and check UA-cam for installations and stuff.
Dude you totally help me out! I was checking the fuses and other stuff. I un-plugged it and plugged it in a few seconds later. That solved the problem! Thanks man!!
But, I'd like that blinking light when I take out the key to stop blinking, is their a button or switch on steering column, called a check lite. To use if I want to just check it to see if it's working or not. Not by putting key ingition to stop it. I want it to stop when all lies in car off
@@DanielFrost21 I might have to take it in - after noticing someone screwed around with the airbag itself, I'll try a junkyard replacement, if it's under $20. Should be, my winter beater is 16 years old. If it pisses me off enough, out comes the bulb ;P
@@junehp3507 Yes I did it with it off, DeoxIT D100L-25C in the connector, Last time I'll have to do that. I'll add it's really easy to tilt the seat back when you remove the bolts in front and just loosen the ones in back.
I have done everything nothing takes care of the problem or the issue because is not doing anything to harm me anyway the only thing I can think k is if the thing deployed with out warning and squash me over some how that it brakes my nebut other than that nothing
Hello from Austin TX I have a 2008 toyota tundra Do you know if do I have to add a switch/interruptor for the front bumper fog lights? Since the tundra come with harness for the fog lights originally But the main switch does not turn the lights on
Hey I'd did all that nothing work, my light went out I drive it for about 1 mile I went to park the car I went to put it on park the light came back on, no accidents and nothing, it happen after we had all that rain but my car was park all that time, then i went to the store came back light I notice it was on, then I follow every one suggestions but nothing works, I'm tire no more trying to get it off no more !!!
Thank you sir. I found the connection under the driver seat and just jiggled it a bit and made sure it was not lose and it worked. didn't have to even remove it.
Do you need to disconnect the neg cable on the battery before messing around with the wiring or plugs?? You also mentioned "Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?" I have a 1998 Toyota Corrolla LE. I don't know where the passenger airbag light is, I only thought there was one on the dash? Thanks
On most OBD2 vehicles, doing this will not work. What he did was fix a bad connection, nothing more. IN most cases you need to read the codes and determine the issue first. But hey, feel free.
Sure has worked for a lot of vehicles according to the comments. And virtually every vehicle on the road today is on OBD2 vehicle. Looks like you're incorrect.
This guy is 100% right. This is not how you do ANYTHING except fix a bad connection. This is not a reset. For example, a reset requires a scan tool or a paper clip in the obd pin hole 4 and 13.
@@JonEhBee I agree. My SRS warning light is on, so I tried this 'fix'. It didn't work, and I didn't expect it to work either. It's kind of suspicious that he doesn't show whether it worked on the car in the video, isn't it? I know he says it doesn't work every time as a disclaimer, but if I were making this video, I'd show one of the times where it did work as proof that it works at least sometimes. If this fix works for you, then it's because the connection was loose in the first place. All you're doing is re-seating a loose connection. It's not in any way a "reset" of the airbag system.
Guys if you are going to do this, Disconnect your battery and wait for 5 min . Otherwise if theres some current in wires, the Air bag can Go off, when u move the cable .
Could be car seat sensor is bugged to believe there is a child in your passenger seat and turn off the airbag in case it might do sever damage to the make believe child there if no one is there
So what color? I'm sorry dude, thanks for trying, but annoying video between the beeping, the repeating, and general useless information. I'm not sure if you even said what to do, because I got so irritated waiting for the point. My key take away was beeping, yellow, subscribe, no thank you
hello I have bag light only if someone sits in the passenger seat after it stay on till the car is turned off. I have 2010 Chevrolet Aveo i bought a scanner and got the results of scan and hope you can help me with your understanding of results of data. here it is as follows: code B0081_0F PASSENGER PRESENCE MODULE ERRACTIC/ B10010_0 / SENSEING AND MODULE (SDM) OPTION CONFIGURANTION ERROR # 2 / SUPPEMENTAL INFLATBLE RESTRAINT / FAULT 12 THAT ALL HAVE FROM SCAN HOPE YOU WILL RESPOND SOON
Worked on my 2013 Toyota Venza! Dealership hasn't been able to figure it out for years. They wanted me to pay an arm and a leg to really get into the seats for them to try and find the issue. This video saved me time & money! 🎉🙌
Yep, that what they do same for charging you a kidney just for plugging your car to a scanner. I bought a code scanner on Amazon and check UA-cam for installations and stuff.
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
Same here. Wow. Thank you!
Mine it's like that now. Don't know what to do.
I unplugged and plugged back and still not working. I'm thinking is belt switch.
Just letting you know that the warning label at 0:56 is written in French not Spanish.
@gordon mathew Because if you're taking advice from someone on youtube, you want them to be smarter than that.
@gordon mathew Smart fellers...
@@acehandler1530smorlof forlorf....
I will try this on a 2003 Toyota Avalon; hope it works--by the way, the warning tag as seen in your video is in French.
Dude you totally help me out! I was checking the fuses and other stuff. I un-plugged it and plugged it in a few seconds later. That solved the problem!
Thanks man!!
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
is the battery connected and the ignition on? I think the answer is yes. would like ooster to specify.
Thank you your trick worked for my 2013 camry
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
do I have to disc the battery before I touch that yellow box.. Also what is thef use for the air bag. thanks
that photo with the two guys during a crash is hilarious!!!
Tnks boss...one question....Car have to be on, off, battery disconnects....switch on or off??
I know this was 2 years ago but thank you that light was bugging me lmao
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
👍🏼 Hi 👋🏻! Do you know the place of the fuses for airbag light 💡?
😂
@@LOLZZ184I already fixed it by myself
Hey where was it;!!?
Just one side need to be disconected or both side ?
Thanks for the help. You saved me some service fees. I owe you some beers
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
Thank you it is still working.
Mine got activated in a windy day going down on the freeway.
You don’t have to unhook the negative batt terminal before to unplug that harnesszv
Harness*
I did it 😂
But, I'd like that blinking light when I take out the key to stop blinking, is their a button or switch on steering column, called a check lite. To use if I want to just check it to see if it's working or not. Not by putting key ingition to stop it. I want it to stop when all lies in car off
Can a dealership turn them off to get more money or have you buy a new car
They sure can, if you have no will and are easily manipulated.
@@DanielFrost21 I might have to take it in - after noticing someone screwed around with the airbag itself, I'll try a junkyard replacement, if it's under $20. Should be, my winter beater is 16 years old. If it pisses me off enough, out comes the bulb ;P
Do you leave the ignition on when un-plugging the connector?
Im not a mechanic...but The ignition should be off, a short can lead to airbag discharge!
@@junehp3507 Yes I did it with it off, DeoxIT D100L-25C in the connector, Last time I'll have to do that. I'll add it's really easy to tilt the seat back when you remove the bolts in front and just loosen the ones in back.
@@onefastwienerdogmy Honda Civic has the airbag light on and I’m scared to fix it 😅 what if they explode with me working on it
@@pushups443 Make sure you disconnect the battery and wait a few min. before you work on it.
bro please help I change my aribag the stubid worker dose not remove the battery wire now I got the light on for airbag do you know what is the issue
Worked 100% thanks 🙏🏻
Hey dude you know how to fixed the air bag light on the 2007 toyota matrix , nothing you guys say I done nothing works, I'm given up !!!
Dude you know how fix the knock sensor code in a Honda Element 2004?
drive side connector is difficult to plug out. How to do?
I have done everything nothing takes care of the problem or the issue because is not doing anything to harm me anyway the only thing I can think k is if the thing deployed with out warning and squash me over some how that it brakes my nebut other than that nothing
What year was your Tacoma ?
The car has on position?
Should I disconnect battery
Thank you it’s worked❤
Worked, thanks!
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
I don’t recall, I followed what he said to do in the video and it worked.
Thx fixed it :)
Hello from Austin TX
I have a 2008 toyota tundra
Do you know if do I have to add a switch/interruptor for the front bumper fog lights?
Since the tundra come with harness for the fog lights originally
But the main switch does not turn the lights on
Alfonso Martinez I have the same question
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
i try it does not work at air bag light stays on 2012 toyota rav4
did you figure it out? whatd you have to do
@@KollynJ yes it was the black unit under the passangers seat problem sloved
dude take the keys out the ignition
Lol, i hate that damn beeping it drives me crazy😂
Airbag deployment is not nice.
😅
😅😅😅😅😅
Is not necesary to disconnect the baterry before you disconnect the wire? Sorry for my English
my own 2016 corolla driver's seat airbag was messed up after accident..if I unplug it,will the light go off ???
I have tires that on my vehicle and airbag light is still on
this wouldn't reset it if it came on after swapping the head unit would it?
Usually if those aftermarket are from China they usually have a way to deactivate it
Hey I'd did all that nothing work, my light went out I drive it for about 1 mile I went to park the car I went to put it on park the light came back on, no accidents and nothing, it happen after we had all that rain but my car was park all that time, then i went to the store came back light I notice it was on, then I follow every one suggestions but nothing works, I'm tire no more trying to get it off no more !!!
The connection is loose. Electric Tape the yellow connector together so it’s not jiggly.
Thank you sir. I found the connection under the driver seat and just jiggled it a bit and made sure it was not lose and it worked.
didn't have to even remove it.
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
2007 Tacoma, didn't work. :(
Do you need to disconnect the neg cable on the battery before messing around with the wiring or plugs?? You also mentioned "Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?" I have a 1998 Toyota Corrolla LE. I don't know where the passenger airbag light is, I only thought there was one on the dash? Thanks
Hi there,
I also got a 1998 Corolla with the same problem. Have you solved it yet?
Kind regards
No, everytime I try to fix this problem something comes up.@@Neo-0423
Helpfull!
On most OBD2 vehicles, doing this will not work. What he did was fix a bad connection, nothing more. IN most cases you need to read the codes and determine the issue first. But hey, feel free.
Sure has worked for a lot of vehicles according to the comments. And virtually every vehicle on the road today is on OBD2 vehicle. Looks like you're incorrect.
Such a great knowledgeable comment from a car repair shop.
Are you sure this will not help I have a 1995 T100 Toyota will this disconnect the airbag because my light is on
This guy is 100% right. This is not how you do ANYTHING except fix a bad connection. This is not a reset. For example, a reset requires a scan tool or a paper clip in the obd pin hole 4 and 13.
@@JonEhBee
I agree. My SRS warning light is on, so I tried this 'fix'. It didn't work, and I didn't expect it to work either.
It's kind of suspicious that he doesn't show whether it worked on the car in the video, isn't it? I know he says it doesn't work every time as a disclaimer, but if I were making this video, I'd show one of the times where it did work as proof that it works at least sometimes.
If this fix works for you, then it's because the connection was loose in the first place. All you're doing is re-seating a loose connection. It's not in any way a "reset" of the airbag system.
thanks work like you said
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
I did and didn’t work
Thanks, that worked great and was very simple.
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
Excellent bro
I tried this on my RAV4 it didn’t work
What you're calling a "Casing" is actually called the connector's "Shell" or "Body". 'May as well use the correct term, huh?
That warning is in French actually, not Spanish. Anyway thanks for the video!
Where is the fuse for the airbag I cant find it ?
Did you find it?
@@chriiss6936 I did thank you
@@FollowTheCloud where? And what car do u have?
I want to know also
Which is airbag fuse
Thanks it worked 😅😅😅😅
Before you did this, was your passenger side “airbag off” light on and passenger seat buckle light flashing even when nobody was in it?
That did not work for me
Honda Civic 2015 have systems airbag I what it off
Guys if you are going to do this, Disconnect your battery and wait for 5 min .
Otherwise if theres some current in wires, the Air bag can Go off, when u move the cable .
Thank u so much
This video was about 2 minutes too long
The beeping noise tho
Nice jobe
Gracias muy buen video bendiciones
Cheers pal
The casing is called a connector. The button is called the lock.
And the door is not a jar. Lol
I just tried that and the light still on!!! What else could it b????
Could be car seat sensor is bugged to believe there is a child in your passenger seat and turn off the airbag in case it might do sever damage to the make believe child there if no one is there
Disconnect the battery
Yappin!
Dude just skipped a whole step..
What is the whole step??
Do I have to Disconnect the battery
You encoded the video wrong.
Get on with it.
THANK U....UM IT'S WORKS!!!.....
Gonna try this on my Lexus IS250.. I can’t stand that damn light
Did it work?
So what color? I'm sorry dude, thanks for trying, but annoying video between the beeping, the repeating, and general useless information. I'm not sure if you even said what to do, because I got so irritated waiting for the point. My key take away was beeping, yellow, subscribe, no thank you
Next time take your keys out of the ignition so it’s not beeping. I couldn’t even finish your video. Wow
Video screen to too less to identify or viability understand properly
Fuck the heeling up
Jesus, take the key out of the ignition and turn that DAMN BEEPING OFF!!
How hard can this be?
BS 3 mins lecture just to tell in 10 secs to unplug and plug that
Some people's kids
Shit no one made any comments
And no one ever will.
hello I have bag light only if someone sits in the passenger seat after it stay on till the car is turned off. I have 2010 Chevrolet Aveo i bought a scanner and got the results of scan and hope you can help me with your understanding of results of data. here it is as follows: code
B0081_0F PASSENGER PRESENCE MODULE ERRACTIC/ B10010_0 / SENSEING AND MODULE (SDM) OPTION CONFIGURANTION ERROR # 2 / SUPPEMENTAL INFLATBLE RESTRAINT / FAULT 12 THAT ALL HAVE FROM SCAN HOPE YOU WILL RESPOND SOON
He did not respond soon.