Get the Smallest Home Automation project delivered at your door step - techiesms.com/product/smallest-home-automation-project-using-esp-01-and-shiftregister/ Keep Supporting, Keep Sharing....
I had achieved the same extending upto 16 pin using esp8266 and shift register. However, my approach is little different as i have made a function to update and latch shift register array and then calling it inside the virtual write function. It's working ok, but I don't know how optimised the code is. But today I learnt a different way to achieve the same. Thank you so much for this awesome tutorial.
Sachin, every Sunday after wake up I first use watching your video 📸 only, last time you missed on Sunday video. 1. How to use the above project locally only? 2. How to configure the above project with "Tasmota" ?
Nice isolation of the mains on the pcb, interesting how the logic code works. I'm a little confused still, are you talking direct to your shift register that's firing the relays? I reckon we could get your device working with esphome also.
I like this one but... is it possible to add "IR control" or other sensors like "temperature and humidity sensor" in this project having esp01 controller?
You can add this project input as voltage and amps It is more useful feature to any normal user they can see how much power consumption on this board and how much appliances are consume that much of power
I made same but some components are different Like i used relay module seperatly There is a proble When i change fan speed all relays are chage their state it is a big problem for the project All relay works v. fine without connecting the fan ( inductive load) May be its reverse spike voltage of inductor .. Pls give me any solution .....
Best progress in home automation 🔥🔥🙌🙌but nevertheless it would have been better to use esp32 chip or esp8266 chip atleast we can update wifi credentials
I would suggest you to read about WiFiManager and OTA Update, its available for esp devices but as for esp-01 i still do some research to compress the code
Wish someone could teach how to design a pcb from scratch; using not altium of course. Don't quote me wrong I like it but it's very expensive for just hobby projects.
@techiesms Automate a 1ph submersible pump which is a capacitor Start capacitor run type . That should get on when the OH tank is empty and shut down when it is filled. 😊 Expecting your reply Sir.
you will need 1 40A Solid State Relay 1 Small Solid State Relay 1 Normal Relay (NC) Microcontroller (Nodemcu or d1 mini or anything ) Ulltrasonic Sensor to detect water level Cat 6 Shielded Cable Hi Link 5V 2A Optional: Oled display or ir receiver etc
@@amitsamanta996 Sir Ultra Sonic sensor doesn't last for more than 2 months. It's better to use a float sensor or SS sensor. Please provide me any video about this Sir.
Well using this project do require to build some logic for shift register so if you know how to do that in HA well you can make it work And if you don’t know that, well I’ll suggest to use our other home automation projects that are directly compatible with HA Contact on 8200079034 for more details
Useless channel, He doesn't share any gerber file, He is just publishing this kind of video for his business. You should let us try. Many other channels share their gerber files.
Get the Smallest Home Automation project delivered at your door step - techiesms.com/product/smallest-home-automation-project-using-esp-01-and-shiftregister/
Keep Supporting, Keep Sharing....
As long as your in India...
I had achieved the same extending upto 16 pin using esp8266 and shift register. However, my approach is little different as i have made a function to update and latch shift register array and then calling it inside the virtual write function. It's working ok, but I don't know how optimised the code is. But today I learnt a different way to achieve the same. Thank you so much for this awesome tutorial.
Can you please share your project details?
Chandan kumar bro app circuit kaise build krto ho muzhe samzayi na
Splendid work done with ESP8266 . This chip is amazing . 🌹🌹
Sachin, every Sunday after wake up I first use watching your video 📸 only, last time you missed on Sunday video. 1. How to use the above project locally only? 2. How to configure the above project with "Tasmota" ?
Nice isolation of the mains on the pcb, interesting how the logic code works. I'm a little confused still, are you talking direct to your shift register that's firing the relays? I reckon we could get your device working with esphome also.
Ya
It will work with ESPHOME as well
can you please show how to add inputs to this board also
very clever coding using shift register and get logic
Your team did great work
World best projects making this chanal
U r amazing✌️✌️
Truly unimaginable. Wonderful work .as usual.
Kia Baat Hai.... Bhai Red Node waley Videos ko Public hi kar dain...
Hey Sachin
Good efforts to your team for building that logic
Even i know those logic gates but never implemented on these projects
as usual, only surprises in your research, congratulations!!! how to add a second shift register (16 output)?? thank you😇😇😇😇😇😜😜😜
I like this one but... is it possible to add "IR control" or other sensors like "temperature and humidity sensor" in this project having esp01 controller?
yes it is possibe
Very nice, thanks for the video. I wonder why you are not using esphome, it is clearly much easier.
Cool project, can wifi module go back to the pcb as it is multilayered pcb.
It will save more space.
Thank you so much for this video I have waited so long for this video thanks for sharing
I can now peacefully use my shift register🙏🙏🙏
Hahaha
Happy Making….
You can add this project input as voltage and amps
It is more useful feature to any normal user they can see how much power consumption on this board and how much appliances are consume that much of power
Legend level work
Thank you 🙌🏻🙌🏻
can you share video of same
internet and manual
I made same but some components are different
Like i used relay module seperatly
There is a proble
When i change fan speed all relays are chage their state it is a big problem for the project
All relay works v. fine without connecting the fan ( inductive load)
May be its reverse spike voltage of inductor ..
Pls give me any solution .....
Excellent prototyping 🎉🎉🎉...
Please do complete AWT IOT based automation..
Sachin sir you are great.....
I’m just a Maker 😅😇
Super bro 🔥✨🥳
I wish this has an US shipping available
Best progress in home automation 🔥🔥🙌🙌but nevertheless it would have been better to use esp32 chip or esp8266 chip atleast we can update wifi credentials
By adding one button you can add the option for updating WiFi credentials in AP mode
@@rahulb23 can u explain a bit more or did anyone made the working code for this
I would suggest you to read about WiFiManager and OTA Update, its available for esp devices but as for esp-01 i still do some research to compress the code
@@akay9865 ok thanx for the info
Wish someone could teach how to design a pcb from scratch; using not altium of course. Don't quote me wrong I like it but it's very expensive for just hobby projects.
Hey Sachin can you pls share schematic for the fan regulator system using BT136 triac instead relay....
Your videos' presentational style is excellent.
Thank you 😊
Kindly make a video to use Esp8266 both online and Offline
Wow very nice product... will it also work with voice assistant... can we integrate with Alexa and Google home
Can you provide the gerber file.. im have a cs background and im interested in iot and electronics..
Hi Sir can you make your own AI using ESP 32 no Google no alexa just for a own iot board "hey ....... Turn on the lights"
Sir, If any power failure happen in electricity line, after power coming back it will remain the same?
Nice video, are there any ways to change the template id or auth token after uploading the code..?
I remember you have manual regular control on the older version. No manual regulator option for this one ?
In this version, their is no option for input
You can only control via mobile application
Hi buddy really great, i like to discuss about the pcba designing, pls let me know how to reach you out.
eager to make purchase but waiting for realtime feedback of manual switch board
Can we connect it with home assistant?
Yes, with change in codes
Nice project
But one question ❓
Do you offer automation courses to students?
Good evening sir please I want to know how can we make a 5-speed fan regulator
hi am sorry but do not know how to change address on you form do you sell this to england
Can you confirm this works with TASMOTA? IF YES, please share template and i will order.
Sachin
Why don't you make home automation using solid state relay and ESP12E with fan dimmer.(Just move on from those tiktok spdt relays)
1) When the power supply failed it's kept the last status when the power is came back?
2) when you make smart IR blaster?
1. Use LittleFS to store data in the memory
2. IR blaster is just a normal IR LED, and use IRSend library to send any hex code
@@amitsamanta996 you have any tutorial for both
Can we use the same hardware to control 7 appliance(lights) instead of fan speed controller?
the design will need modifications but it shouldn't be a very big change
Yeah you can but need to relay to those extra pins
Creative video, thanks :)
Sir i want to know how much is the input supply to your power supply?
Can we use rain maker
I need a person who has the whole knowledge of home automation and know whole knowledge of esp boards . I need help plzz reply
Excellent, keep it up 🙏
Thank you 😊
Do share it with others as well
@techiesms Automate a 1ph submersible pump which is a capacitor Start capacitor run type . That should get on when the OH tank is empty and shut down when it is filled.
😊 Expecting your reply Sir.
already did that
you will need
1 40A Solid State Relay
1 Small Solid State Relay
1 Normal Relay (NC)
Microcontroller (Nodemcu or d1 mini or anything )
Ulltrasonic Sensor to detect water level
Cat 6 Shielded Cable
Hi Link 5V 2A
Optional: Oled display or ir receiver etc
@@amitsamanta996 Sir Ultra Sonic sensor doesn't last for more than 2 months. It's better to use a float sensor or SS sensor.
Please provide me any video about this Sir.
there is no video
i made for me
with ultrasonic sensor i know the realtime water in tank in litres
and its lot cheaper than a pressure sensor
Does this product actually work in long term. Esp-01 catches noise from switching of fan and resets. I have worked hard to solve this issue.
Bro can you explain how did you solve the issue
@@AAatish-pt2nt sure
credit card he Q
ATM card v likh sakte the
Gerber file where is it?
please sell pcb also at resonable price
Is this works with home assistant
Well using this project do require to build some logic for shift register so if you know how to do that in HA well you can make it work
And if you don’t know that, well I’ll suggest to use our other home automation projects that are directly compatible with HA
Contact on 8200079034 for more details
Yar fan regulator nahi mil raha project ke liye koi or way hai manual fan control karne ka in iot
you can use traic. for controlling it
where if pcb design file
Good
plz make this video in hindi
Thanks bro
Always welcome 🤗
Can u send in pakistan
nice
Thanks 😊
Alexa compatability
it is costly try to make it more cheap
Pehla comment
Thank you so much for the comment 🙌🏻🙌🏻
Useless channel, He doesn't share any gerber file, He is just publishing this kind of video for his business. You should let us try. Many other channels share their gerber files.
Point is ५०%correct
How can I contact you 😂 can u give me your exact mail id
techiesms@gmail.com