Home Automation with Tasmota using ESP32 Alexa voice control relay & DHT11 sensor | IoT Project 2021
Вставка
- Опубліковано 23 лип 2021
- In this ESP32 project, I have explained how to make the home automation with Tasmota using ESP32 Alexa voice control relay and DHT11 temperature sensor to control 8 appliances with Amazon Alexa and manual switches. You can monitor the real-time feedback, room temperature and also control the relays manually from switches without the internet.
You don't need any coding knowledge to make this voice control Alexa smart home system. And all the tools used for this IoT project are FREE and you can easily download them from the Tasmota GitHub page.
Visit the following website to get electronics components, modules at a very reasonable price
utsource.net?source=UA-cam
__________________________________________________________
We need your support 🙏🏻 to make Tech StudyCell sustainable.
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
__________________________________________________________
During the IoT tutorial video, I have covered the following topics:
00:36 Control relays with Tasmota Alexa using ESP32
01:39 Control ESP32 without internet.
02:47 Required Components for this Tasmota ESP32 project.
03:15 Circuit diagram of ESP32 Alexa smart home system.
04:50 Download the ESP Flasher tool & Tasmota release from Github.
05:33 How do you install Tasmota on ESP32?
06:59 How to configure Tasmota sensor & devices in ESP32?
10:10 Tasmota Alexa integration for ESP32.
11:06 Setup Amazon Alexa App for Tasmota devices.
12:19 Control relays with voice using Amazon Alexa App and buttons.
Required Components for the ESP32 projects:
1. ESP32 DEVKIT V1
2. 8-channel 5V SPDT Relay Module
3. Push Buttons or Switches
4. DHT11 sensor
5. Amazon Echo Dot
Amazon India Affiliate links:
ESP32 DEV KIT V1 : amzn.to/331pohb
8-channel 5V Relay Module : amzn.to/3mTWyVZ
Echo Dot Alexa(4th Gen) : amzn.to/3srCiPA
Amazon United States Affiliate links:
ESP32 DEV KIT V1 : amzn.to/3mBjCch
8-channel 5V Relay Module : amzn.to/3p50UeH
Required Components for the ESP32 control Relay Module PCB:
1. Relays 5v (SPDT) (8 no)
2. BC547 Transistors (8 no)
3. PC817 Optocuplors (8 no)
4. 510-ohm 0.25-watt Resistor (8 no) (R1 -- R8)
5. 1k 0.25-watt Resistors (10 no) (R9 -- R18)
6. LED 5-mm (10 no)
7. 1N4007 Diodes (8 no) (D1 -- D8)
8. Push Buttons (8 no)
9. Terminal Connectors
10. 5V DC supply
Important Points:
1. You need an Alexa device like Echo Dot for this project.
2. For no device found error, restart the Echo Dot and try again.
3. The ESP32 and Echo Dot must be connected with the same Wi-Fi.
4. When the flashing starts, you have to press and hold the BOOT button of ESP32.
5. DHT11 sensor is optional.
6. Please take proper safety precautions while working with High Voltage.
7. All the tools used are open source and FREE.
Important Links:
Download the Tasmota firmware and ESP flasher tool from the following article
iotcircuithub.com/tasmota-esp...
Download PCB Gerber file for this ESP32 IoT based home automation project
drive.google.com/uc?export=do...
$2 for 1-4 Layer PCBs, Get SMT Coupons: jlcpcb.com/RHS
Previous video on Tasmota ESP8266 NodeMCU
• Smart Home using Tasmo...
During the Tasmota tutorial video, I have explained all the steps to make this ESP32 Alexa home automation system using Tasmota to control the home appliances with and without the internet.
You can control the home appliances from Amazon Alexa app from anywhere in the world. Only the ESP32 and Amazon ECHO DOT should be connected with the same Wi-Fi.
Anyone can make this Amazon home automation, as you don't need any coding skills to make it. Just flash the ESP32 with Tasmota Firmware, then configure the Tasmota dashboard as per the requirements.
So with this smart house system, without writing a single line code, you can convert any appliance to IoT devices and control them through the internet.
So, now you can just say "Alexa, turn on Light" to control the home appliances.
#homeautomation #tasmota #internetofthings
-------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more such projects: iotcircuithub.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
Twitter: / techstudycell
-------------------------------------------------------
Other useful Internet of things projects:
Latest ESP32 projects playlist:
• ESP32 Projects
Latest NodeMCU projects playlist:
• NodeMCU Projects
ESP32 Smart Home System with Amazon Alexa app & Manual Switches
• ESP32 Smart Home Syste... - Наука та технологія
⚠ This video took a long time to make if you would like to buy me a coffee to say thanks, link below: ☕
PayPal: paypal.me/sdaspay
Patreon: www.patreon.com/techstudycell
How to switch google assistant instead of alexa
Where is temp sensor reading in alexa
Thank You so much brother,from months to months i have searched for this Project on UA-cam,but finally got it.Thanks bro for these project
Well done great job👏👍
Thank you for the explanation
Welcome
l like your video and l understand properly.🎉🎉👏👏👏😊
Congratulations for 100k subscribers. 🥳🥳🥳🎉🎉🎉
Thank you for your support 👍👍
Osm bhai
Great tutorial. Keep up the great work.
Thank you
Nice work , please make a video how you build that PCB 4:08 or how make such PCB's , if you already made a video pls share a link it would be helpful. 👍
Great video 👍👍👍
Very helpful. Thanks!!
Welcome
thank you Bro really
Thank you for the explanation
how to connect -> Tasmota IR remote
Superb
Very good Job!!! Could you make this same project adding BLE? It will be the best and complete automation system.
Thanks.
Indeed a nice job. Is this expandable to address multiple boards with 8 or 16 relays?
I have a situation which requires to address 32 relays and need to add a multiplexer/switch register.
Great son. Good explanation.
Thank you
Felicidades muy buen trabajo
Pregunta se puede hacer lo mismo pero para 12 canales muchas gracias
Wonderful work ,
Thank you!
hi can we connect this only with alexa app? if yes then please guide me as i'm not able to find these devices on alexa app.
Sir, i wanna ask you, why the PCB viewer in video different with the Gerber File viewer? there is IR in the Gerber File but in there is not in video. Is that same or not?
nice project
I want to make hime automation project by esp32, i made a project ir sensor, Bluetooth, wifi, manual switch together but i face a problem, when add manual switch in program then doesn't working, again remove manual switch or ir remote then work,
it possible to make it, bt, wifi , manual together?
sir aapne vcc and ground par konse components lagaye he
Good. I like it. I will try
All the best
Thanku sir
how to change the tasmota wifi network without losing the schedule,great video
Noob here, does 5v realy can work with my laptop charging which requires input of 240v?
Which software you are useing for circuit designing
Bought the board and connected all components one problem no7 not working. Changed led, re solder all IC without success. Any suggestions?
👍🏻👍🏻👍🏻
Dear thank you For a Informative video but I'm unable to find the Esp32 on Alexa App. Please let me know if you can Guide me about
congratulations very good job
Question, can you do the same but for 12 channels, thank you very much
Can I use it with echo flex
I want to do smart home with it
Plz reply
Bro can you a project including
Ir remote+alexa+blynk+humidity+
temperature+Bluetooth+manual
Which controlls 8 relays
Can we use 4 channel ssr...with dht11....?
Sir .very nice video
Thanks and welcome
Can you make a circuit for auto on off motor to empty a tank
I mean when tank is full motor on
When tank gets empty motor turns off
HI where can I buy the board that you are using here. Thanks
Hi Sir Please add IR Remote Also...
Thanks
hello, nice job. When the device is turned off and on, tasmota does not reconnect to wifi. Can you help me
HEY, HOW CAN I ADD A FAN TO THIS AND CONTROL ITS SPEED ?
मैं आपके टेलीग्राम ग्रुप का सब्सक्राइबर भी हू सर
Can it work with alexa smart speaker using aap only
I don't know why I can't receive temperature data from dht11 after doing all same configuration
Sir is it work over the internet or in local area network
Hi... Can we control fan speed with tasmota
Very good
Thanks
Bro Google aassistent Alexa,Ir control manuval condroll 4 chanal relay circuit bord plsss
I could not get the BIN files to work i like to get some help
Bom dia. Se possível poderia fazer um vídeo de como voltar o firmware de fabrica, passo a passo. Desde já agradeço
What's the advantages and disadvantages of using the third party applications like sinric or IFTTT or blynk
Paid
Do you encounter relay flickering issue(turn on and off split of second) during power up the board?
Which board are you using, ESP8266 or ESP32? in ESP8266 TX0 should be avoided for relay
How to control a fan speed with tasmota please make a video about
Can you please tell manual switch wiring
Sir Plz.. Make Video on how to Enter wifi credentials OTA in ESP32 in basic simple way
Sir how can we install this in direct switch board? Please reply and show how to install in switch board directly
for alexa connectivity any bridge device required ? please help to connect alexa i follow all correctly but not sucess to connect without hue bridge ?
You need an echo device.
You make a video using esp32 and 8 channel relay using Amazon Alexa and IR receiver...
can i use tasmotizer to flash firmware
Does it works with google nest
День добрый, спасибо за видео. Но расскажите о настройке правил (rules) в tasmota
Sir next video touch and internet control fan regulater
Can we use dht22 sensor
Sir ESP8266 8 chanel pe bhi eak video banaiye
Com port 6 is not showing.... How to solvd it
Sir Do I need to buy the Amazon Echo Dot to work alex? I try the alex add device on my mobile apps only no device located.
Yes. You need one echo device
can we integrate this tasmota project into home assistant plz tell
Hello how are you?
Congratulations on the content, I'm learning now on this IoT adventure.
I followed everything right in this tutorial, the tasmota is all configured, but the Alexa app can't find my ESP32 board, could you help me solve this problem?
Thank you very much in advance!
use alexa divoice for this
please guide to install esp8266 Timer Control with Blynk
Add ir also bro in ur nxt video
Bro can you make this project with infrared
New subscriber here... i really like all your projects sir... may i know the value of the resistor in R19
10k
How many esp32 devices can be added in alexa for free?
Sir agar ham manually on krenge then pin low rhegi fir sir application se state kese change ho rhi he 🤔isme xor Gate lga he?
It has pull-up resister to do this job
Sir wife router off kr k on krne pr esp32 auto reconnect ni ho ra...pls help
Can be used multiple esp32 in a home, if yes, please let me know the process or make a video as soon. I will be highly obliged. Thanks
Okay
@@TechStudyCell hi can you please share your whsatpp please I have order pcb from jlcpcb and connected all the components but facing some problem please help me out
Facing relay flickering issues after connecting, what could be the issue? Tried different esp32 boards also different relay boards, same issue. Using 2.4a mobile charger as power source
It may be due to loose connection
it is from the bad wireing
it is from the bad wireing
Great project and works very well too. However, the IP address changes whenever there is a power outage and the router power cycles. How to set it right?
Pls don't generate the IP again and again.. once generated try to acces it with same ip
Hi, I'm Brazilian. I would like to know if it is possible to connect two switches in parallel to command the same relay?
Como ninguém te respondeu,sim é possível usar interruptor paralelo, se preferir a resposta em inglês é dizer
@@vanderleisilvasantos5343 Salve blz? pois é cara eu acabei montando e funcionou legal. Tecla controlando o rele e por voz tbm. Pena não da para ter a temperatura aparente na alexa.
@@helbertmaik1894 salve ,não sei se você ainda tá mexendo com tasmota, vamos lá já rodei tudo não encontrei, como mudar a rede Wi-Fi sem perder a programação, exemplo montei um módulo tudo funcionando, quero instalar em outro lugar, aí preciso só mudar a rede Wi-Fi, aí começa o pesadelo não consigo faço o reset mais aí perde a programação.
Is it possible to add the push button for turn on / off all the lights?
Ok
I’m not able to connect it to Alexa don’t know why help me
Hi
Your project is very nice and interesting.
I want to buy your PCB module.
How and where to buy it.
Can you share the link to buy pCB from you.
Thank you 🎉
I can deliver within India only
Sir.how much the full home automation project.
Sir please make telegram group so we can suggest and discuss our problems with u and members
Okay
Bro how can I apply 16 channel relay
Hello.
I would like to buy a ready-made platine from you, it is possible.
Can we use microusb to power the circuit instead of 5V Dc power supply?
Yes. You can use mobile charger and connect it with ESP32. It should be atleast 2Amp
@@TechStudyCell I follwed the same procedure as you. (For 4 channel) but whenever there is a power cut and power comes again. The 2nd relay is defaultly setting to off position. How to fix this?
Como podemos intercambio de ideas
what is the cost of pcb ..
what is the cost of full circuit ..
Can we use Alexa mobile app to control the appliances without Amazon eco dot
No. You need a Alexa device
Hi my name is juan sebastian im a 11 year old kid from colombia and i like a lot your iot projects and i wanted to see if you could help with one project i wanted to do is automating my garage door so i can open it and close it through a button and through alexa or google home please could you help me.
Thanks
What if when power goes off for a while and comes back.. Will th relay regain its previous state... I mean relays which where off while stay off and relays which where on will stay on....
Yes
@@p-tech8166 Actually i have automated my room using ESPALEXA, Blynk old version... I also have add A RF remote........
As we have to pay for every new device we add in New Blynk version and as blynk has launched a new version so i fill that now and then they will discontinue the old version... So was sreaching for a alternative.... So how will we add RF Or IR remote with Tasmota....???
@@burhanuddinbhiwaniwala618sorry I don't have any idea about that
@@p-tech8166 Whenever the power goes off and come again.... The 2nd relay is setting to off position defaultly... How to fix this?
@@vineelarepalli I didn't face any problem regarding this . You can try it by resetting the device
Can we connect multiple ESP32 in a single Alexa app?
Yes u can connect. N number of ESP32. I connect 3 in my home
iam a newbie in this field, and i follow your instruction, and succes drive the relay with tasmota, but if i take out the usb cable ( for download flash), suddenly tasmota cannot connect with ESP32, and cannot control the relay, what happend?, can you support?
thanks and regards
After that can you control it with Alexa app?
@@TechStudyCell not yet try with alexa
Touch switch kese bnaye iske liye
सर हिंदी में वीडियो बनाएँगे तो और भी अच्छा होगा
I am a university student, can you help me with this project?
Sir aap timer project banaen jaise ki time to time Light On Ho Jaaye or off ho jaaye time to time motor on ho jaaye time to time motor off ho jaaye
Noted... Thanks
sir how can we connect google home with tasmota