You would think that after all these years of car design manufacturers would fit a power point and Phono socket in the boot to connect things like this.
Watching this helped me so much, I was having weird sounds from my sun and it wasn’t playing properly I’m guessing it was interference because last time I had people do it for me and the RCAs were running next to the wires so ima change that and see if that helps thank you
Hi dude, i have the same subwoofer (Edge) when the stereo is off and the car is closed(locked), the green light on the subwoofer has to be on or off?? Thanks
Great video! Torn between this and the Kenwood KSC-SW11, feel like this would shake my Fiat Panda to pieces! At £100 it's tempting, but it does steal a lot of room in the boot.
This is the 10" one. Its not that big to honest. Just right for me. But would look a bit bigger in a fiesta or panda type boot. But hay!... fuck it!!! Full send..hahaha
@@sonarcreep3691 Yeah the panda's boot is tiny! I was thinking of upgrading (thing's gutless) but I've done so much to it now I may as well go all out and keep it a bit longer. New sony hu, sound deadening throughout, stock speakers are actually decent but lack in the bass department. If it does well on the MOT in a few weeks I'll definitely consider getting a sub for it.
@@RayovacWorkhorse you can always take to the sub to your new car if you upgrade though. So not a waste of money.. thanks for the comment as well bud. Much appreciated 😁😁🙏
Hey, trying to install the same in my car, with the RCA cable, are you only supposed to plug one in? I have a subwoofer like you did but have no clue about the other or does that not matter
@@sonarcreep3691 I installed the blue amp wire to the blue and white remote wire it had a sticker saying it was the remote cable so I just don't understand why it drained my battery
I've got a sub to fit in my Megan coupe, I have jo idea but was great video to watch... can you show more about splicing the wires as not sure what that means
Thanks for watching.😁 hope it was of some use?.hah. "Splicing" is just joining a wire onto an existing wire by either cutting the wire you would like to connect to. And soldering what would now be 3 wires all back together. Hope I explained that OK?. Haha. If not? Just look up "Splicing wires" on utube.. there is tonnes of them.
I installed this exact one in my BMW 3 series and is a dual subwoofer. But the audio sounds funny. The car’s original speakers bass doesn’t seem to work and the bass boost setting does nothing. I’m so confused. The bass just comes from the boot and it seems like the cars bass has been switched off. Would appreciate your help
@@sonarcreep3691 thanks for your response. It’s the I drive business edition. They are the normal speakers which come with BMW not the upgraded ones and sorry I don’t know nothing about audio to answer the second question. All I remember was the guy who fitted it in was doing something from the glove box, underneath the passenger seat and then finally the boot.
@@BMW-M3C ok. He might have wired it up incorrectly. It should not affect the tonality of the stock speakers. So something is defo a mess... hope this helps
@@BMW-M3C hi bud. Bit of an old comment! But just in case you still haven't sorted this. I also have the idrive with base speakers (no tweeters, just 2 front door speakers, 2 rears and 2 udnerseat subeoofers) Set the HU treble and bass to a little over half. Then adjust the frequency on the sub to your liking.
On this sub? Put volume on full on the sub. Turn the frequency knob just over half way.(will need to tweet this, as it depends on what your door speakers sound like) And the final "bass boost" knob! Apply to taste. Once the sub has been set, you can now control just how much bass you want be adjusting the EQ of your headunit. Again! Its a personal teste thing. So adjust what sounds good to you... hope this help
@@sonarcreep3691 I'd recommend removing the negative terminal from the battery, as it removes the spark when you put it back on :) On another note - that is one clean engine bay! The amplifier settings are not meant to be done to taste lol, gain is for matching the input voltage to the cd player, the frequency is the crossover so you can blend it with the speakers, and the bass boost - be careful with that one at high volume lol.
" 12 inch will take up too much room in the boot" meanwhile im looking at a twin 12 inch sub to fit in my mini lol
You would think that after all these years of car design manufacturers would fit a power point and Phono socket in the boot to connect things like this.
No Sh1t pal,Save all the Piss on,potential ruining the fittings in a Rage.
Watching this helped me so much, I was having weird sounds from my sun and it wasn’t playing properly I’m guessing it was interference because last time I had people do it for me and the RCAs were running next to the wires so ima change that and see if that helps thank you
Thank you for the comments. Glad it helped in some way. 😁👍💪💯
Turns out the rca is still damaged but I recon the only reason it’s messed up is because it was put where it was
Hi dude, i have the same subwoofer (Edge) when the stereo is off and the car is closed(locked), the green light on the subwoofer has to be on or off??
Thanks
No lights should be on after the ignition is off.
Great video! Torn between this and the Kenwood KSC-SW11, feel like this would shake my Fiat Panda to pieces! At £100 it's tempting, but it does steal a lot of room in the boot.
This is the 10" one. Its not that big to honest. Just right for me. But would look a bit bigger in a fiesta or panda type boot. But hay!... fuck it!!! Full send..hahaha
@@sonarcreep3691 Yeah the panda's boot is tiny! I was thinking of upgrading (thing's gutless) but I've done so much to it now I may as well go all out and keep it a bit longer. New sony hu, sound deadening throughout, stock speakers are actually decent but lack in the bass department. If it does well on the MOT in a few weeks I'll definitely consider getting a sub for it.
@@RayovacWorkhorse you can always take to the sub to your new car if you upgrade though. So not a waste of money.. thanks for the comment as well bud. Much appreciated 😁😁🙏
@@RayovacWorkhorse i actually have a panda myself did it rip your car apart? Hahaha. I’m interested
@@dnblegend280I also have a panda 😂 looking at fitting one soon did you end up going through with it?
Thanks for the detailed explanation Sam UA-camrs legging the most important Thing I am no Mechanic but that was simple to understand what i need to do
Well I got it instal it in my car Thanks very much
Didn't get how to fuse the remote wire to the antenna cable. I'm a newbie. Are there any tutorials for it? Thanks
Might pick this up. What wiring kit should I get ??
I had it in polo 2003 all was perfect. Now I have Pegout 207 SW and I can not find any access to the engine room from the cabin. Any advice?😊
The camera angles though, are you working on a Ford Edge or the damn Space Station
Hey, trying to install the same in my car, with the RCA cable, are you only supposed to plug one in? I have a subwoofer like you did but have no clue about the other or does that not matter
Thanks for video.How can it gooooo?Does it go near 45hz?
I see you have mazda 3 with removed stock air filter too.Did it ad those claimed 5-6hp?
where do you plug the grey wire? i have an rca cable but idk where to plug, wohld help if you showed in the video
I have just bought a new Edge sub; can I come to you for install?
Wanted one, watched this now it seems longgg to install
It took mine at the mechanic 2 hours,there's a lot o cable to set up,and the electricity part were you need to be careful.
3 Mazdaspeed channels uploaded today lessshhgooo! Great vid Cliff!
Thanks buddy
So nobody gonna tell this guy he sounds just like Tyson fury
Hahahaha. I dont think I sound anything like him mush... ya big dosser...hahahhah
😂😂 jokes aside, your video did actually help a lot though mate, cheers
@@Ethan-cb6lt hahhah. Im glad it was if some help..hah. 😁😁😁
Nobody gunna tell him that none of us can hear him half the time
Do i need to buy high-quality tweeters to go with it or does it matter?
I like to listen to classic rock and roll.
what’s the Hi inputs for to connect speakers maybe ?
Hiya I've just Installed the same subwoofer yesterday worked great then this morning my car is completely dead any ideas why?
Sounds like the control wire to headunit is not on the right wire. The sub should not be active if the ignition is off..
@@sonarcreep3691 I installed the blue amp wire to the blue and white remote wire it had a sticker saying it was the remote cable so I just don't understand why it drained my battery
@@justmekeileyful when the ignition is off, is the amp light still on?
@@sonarcreep3691 no the green light goes off
@@justmekeileyful if there is no light on ? Then it's not that.
How did you fit your remote wire? Did you wire it up to the head unit?
Can’t bloody see what he’s doing, don’t really know why people even bother uploading a video like this they must see it before loading it up 🙄
I did yes.
@@babbarshare3062 did you figure it out?
@@Eikenv1 unfortunately not
I've got a sub to fit in my Megan coupe, I have jo idea but was great video to watch... can you show more about splicing the wires as not sure what that means
Thanks for watching.😁 hope it was of some use?.hah.
"Splicing" is just joining a wire onto an existing wire by either cutting the wire you would like to connect to. And soldering what would now be 3 wires all back together. Hope I explained that OK?. Haha. If not? Just look up "Splicing wires" on utube.. there is tonnes of them.
What is the best set settings for the max bass and deep bass please mate?
Its a personal preference to be honest. Just finding the sweet spot so you can get the smooth punch and still have clear mid and top end.
That yellow ring connector,are they ok to use with the thick red cable?
As I need to fit the same sub,and not sure what connectors to use
All seems to be working find for me buddy. So yes.
Does this wiring kit work with the 12inc model
Thanks for the information. 👌👍
Hello, very good video, was just asking if its possible to just tap into the fuze box instead of going through the fire wall
Not recommended.
Don't do this unless you want a pile of ashes in place of your car
Lol the gain is not a volume control. It is only for matching the output voltage of your headunit to your amplifier :)
what wiring kit did you use?
Reckon this setup will fit in a Nissan Juke?
I cant see why not. As long as the sub will fit in the boot?.
@@sonarcreep3691 should do lol , cheers mate
How do I connect at home ?
I installed this exact one in my BMW 3 series and is a dual subwoofer. But the audio sounds funny. The car’s original speakers bass doesn’t seem to work and the bass boost setting does nothing. I’m so confused. The bass just comes from the boot and it seems like the cars bass has been switched off. Would appreciate your help
What head unit are you using? And how have you got the subs input signal wire tapped from?
@@sonarcreep3691 thanks for your response. It’s the I drive business edition. They are the normal speakers which come with BMW not the upgraded ones and sorry I don’t know nothing about audio to answer the second question. All I remember was the guy who fitted it in was doing something from the glove box, underneath the passenger seat and then finally the boot.
@@BMW-M3C ok. He might have wired it up incorrectly. It should not affect the tonality of the stock speakers. So something is defo a mess... hope this helps
@@BMW-M3C hi bud. Bit of an old comment! But just in case you still haven't sorted this. I also have the idrive with base speakers (no tweeters, just 2 front door speakers, 2 rears and 2 udnerseat subeoofers)
Set the HU treble and bass to a little over half. Then adjust the frequency on the sub to your liking.
Could be phase cancellation. It'll cut the bass right out. Look into the topic a bit more.
Where does the ground wire go
Anywhere metal in the body of the car
Did the sub come with the wiring kit?
No. You have to buy it separately
One I’m looking at says INC wiring kit
@@ernstix8358 think it depends who you get it from. And who has the best deal. So if it Comes with a kit? Your good to go.. happy days...
Yeah I appreciate it man, installing it on my 2002 fiat punto mk2 😂
Hi mate, trying to find everywhere whats the best way to set settings on the sub? Freq bass boost and gain? Whats the best?
On this sub? Put volume on full on the sub.
Turn the frequency knob just over half way.(will need to tweet this, as it depends on what your door speakers sound like)
And the final "bass boost" knob! Apply to taste. Once the sub has been set, you can now control just how much bass you want be adjusting the EQ of your headunit. Again! Its a personal teste thing. So adjust what sounds good to you... hope this help
@@sonarcreep3691 thank you i really appreciate it
@@Rycka9 no problem at all. Glad to help
Hey man you live on my estate ive seen your car and you walking your dogs 😊
Hahha really?
@@sonarcreep3691 I'd recommend removing the negative terminal from the battery, as it removes the spark when you put it back on :)
On another note - that is one clean engine bay!
The amplifier settings are not meant to be done to taste lol, gain is for matching the input voltage to the cd player, the frequency is the crossover so you can blend it with the speakers, and the bass boost - be careful with that one at high volume lol.
Oh my God even your dog sounds British
Hahah
I need that high level input cable if anyone has one ??
what car stereo have you got?
Eonon
@@sonarcreep3691 thanks alot
The install of the unit is on the channel..🙏👍
@@sonarcreep3691 thanks. One more question . Where did you buy your stereo from ? What website?
I got it off the eonon website..👍👍
Good Vid Bro !!
Thanks fella 😁😁😁👍🙏
What about the fuse?
What about it?
Rule no.1 don't let animal hair near the sub 🤣🤣🤣🙈🙈
Tatatata day junior.,lol
BOSE Stands For (B)ecause (O)ur (S)hites (E)xpensive
Imagine if setup the wires so they melt from heat from the engine , and fries your ecu. Rip 💀💀💀
Edge fli trap and vibe are the worst subs
Шляпа