KT200 - ECU PCR 2.1 ( Read Password, Read on Boot, Unlock )
Вставка
- Опубліковано 5 вер 2024
- 👩🏻💻 KT200 reading ECU Continental PCR2.1
- How to read password from ECU
- Read ECU in boot mode for clone
- Unlock eeprom on bench for OBD Reading.
If you like - Subscribe & Share
Hi there. Thank you very much for the contribution. I have blocked and I have no backup
I need to recover the pincode so that i can pair a new ecu with the existing immobiliser and cluster in a 2011 mk3 caddy.
i have the pincode for the new/ retrofitted bosch edc16 ecu but not the original continental pcr2.1 or cluster
The vehicle will run with the edc16 ecu and matching clocks but they are the older style from a mk5 golf.
how do i go about extracting the pincode so that i can adapt the new ecu to the caddy.
Hello, i don’t understand what you want to say, my advice make more research. You cannot swap pcr2.1 with bosch, and clusters you need to transnfer immo data its not working only with pin code.
Im stuck on massge remove and give power to ecu before to continue how to fix this issue please ?
strange to ask to cut ignition on/off when using it in bench. Is that for this reason there is a switch?
To reset ecu / communication. If you don’t perform on/off you cannot read after id or write.. i have tryed without on/off and result was fail…( on some ecu-s not all )
so each time it asks you use the switch? that's damn a job thinking original tools can do that ECU through obd...@@UnixCoDElectronics
Seems it can't calculate checksum in case we make any modification. How many tricore ecu have you read and how much kt200 can calculate cheksum!?
Hello, Checksum for password is not possible, if is read / write is able to do checksum check from 3:30
Vraiment je suis intéressé j'attends votre signe
Miller Ronald Lewis Helen Thompson George
Taylor Melissa Miller Jose Clark William
Sir can we clone this using this tool
Hello, KT200 is capable to read eeprom, flash, security but immo data adaptation for pcr2.1 you need to do it with 3rd party software
@@UnixCoDElectronics thank you so much sir
@@UnixCoDElectronics sir can you tell me which 3rd party software we can use
@@anirudhgautam9213 Hello, weboctopus is via web and there are many others but none of them is free
How to clone pcr2.1 pls
How can Delphi ecm read
What type/model of delphi ecu ?because are many delphi ecu type
@@UnixCoDElectronicshow many model are ?
immo off ?
I have not did immo off, i have only cloned ( transfered immo data ). but it should work without any issues also immo off from flash.
🙏🙏🙏🙏🙏🙏🙏🙏👌👌👌👌👍👍👍👍