Berto I am so proud of you man. I knew you would do great things in this field. Here I am searching things about Fanuc robots because I have an interview tomorrow and they house quite a few fanucs. So I kind of wanted to get familiar. I have a lot of knowledge with Yaskawa robots. And after your very informative video I’ve came to realize these things are very similar to Yaskawa so I think I will feel right at home. Thank you so much. I hope all is well, Caleb Whaley.
Very interesting information i hope you keep doing tutorials like that just one recommendation can you please get a tripod that way the camera man wont be to shaky
Very helpful I work in a foundry and we use the same system for our robots and due to me being a 2nd shift employee there is only so much the upper people have time to teach I will be making my own in future downtime hopefully il make some strides in moving up
I think i work with the R-30ib, these robots can to immaculate work. Thats cool seeing smaller robots, that system (cabinet) under the robot is way smaller than the one im used to, and it looks way newer, we dont have the touch screens. The system/console i work with one about the size of a refrigerator and the robot is about 18-20ft in length when laid out
It is definitely not more advanced than the Yaskawa Motoman, you just know the Fanuc better. I used to work for Yaskawa Motoman and there were many places I went where they were using both brands and there would always be someone one would say the Fanuc could do more But, there was NEVER something that Fanuc could do that I couldn't also do with the Motoman. Also, many of those functions were free with Motoman, but cost extra with Fanuc. Both are very good robots. To me, the main difference is the cabinet. Keep the control door closed on the Motoman and it will stay spotless. The Fanuc will be full of dust, if it's running in a dusty environment. Not usually a huge deal.
@@cornpop7805 thats cool man, these are my first robots im learning on i hope to progress further to other robots or jobs as well.. That makes me think of PlayStation vs. Xbox, as playstation is notorious for getting extremely dusty
I'm sure you've come a long way from when you started your training, but you're making some broad assumptions about the two brands, based on on a very limited experience. Likely the reason you perceive the Fanuc having more "dexterity" than the Yaskawa (Motoman) system, is only because of the size of the manipulator (arm). If your school would have purchased a similarly sized arm, the motion envelope and joint angles would have been similar to that of the Fanuc. Similarly, if they would have purchased a slightly smaller Fanuc arm, the work envelope for it would have sucked too. I used to work for Yaskawa/Motoman and I never encountered a situation that Fanuc could do that we couldn't also do and usually easier. We also provided many more programming freebies that Fanuc would charge extra thousands for.
You know you're really talented but one thing you lack of is understanding that people can't see the screen that you can see due to the angle and the lighting You should have tested out and it always angles and screen and teach pants so people can refuse can see it
Keith Kohl this I can answer from experience. Robots, PLCs, PCs, and other devices require constant power in order to attain its documents, programs, and settings as well. When it comes to robots, they should always have a proper shut down and must have the batteries ready at hand. Now this is also why it is very important for you to always have the robot back in to home position during a maintenance or major shut down in the facility because if it runs out of batteries and it’s been off for a good while it will lose its original 0 homing program position. If let off for a longer time than the software will be lost. It’s a lot like computers truly. When the PC has low CMOS energy, then the BIOs settings will change and you can lose some programs/information.
r30 i r30 ib different teach (manipulateur) different cabinet (armoire en francais) la trajectoire peut etre ameliorer en temps de cycle u can enhance trajectory too much time repeat same point merci
Paresh yes, there is a section within the controller teach pendant that shows the ladder logic that is used to activate the servo drivers... everything that involves electronics will have some form of logic if you really think about. Nothing can perform without conditions.
To me looks like you don't want to share.because the camara was to far away from the teach pendent. I'm been working with ABB robots. And now I'm trying to learn fanuc.
Berto I am so proud of you man. I knew you would do great things in this field. Here I am searching things about Fanuc robots because I have an interview tomorrow and they house quite a few fanucs. So I kind of wanted to get familiar. I have a lot of knowledge with Yaskawa robots. And after your very informative video I’ve came to realize these things are very similar to Yaskawa so I think I will feel right at home. Thank you so much. I hope all is well, Caleb Whaley.
Caleb Whaley find me on LinkedIn bro
Great information on the Fanuc robot teaching pendant !!!
Great video, congratulation from Brazil!
This is very informative. Thank you so much.
Great video! Exciting that it is same operating way as our robotic screw fastening machine which reach one second per screw!
I've only learned on the motoman, this was very helpful
Very interesting information i hope you keep doing tutorials like that just one recommendation can you please get a tripod that way the camera man wont be to shaky
Im in the IT field for about 4 years now… u can find me on LinkedIn
A CNT movement is a move across multiple axes that is more rounded and smooth.
Very helpful I work in a foundry and we use the same system for our robots and due to me being a 2nd shift employee there is only so much the upper people have time to teach I will be making my own in future downtime hopefully il make some strides in moving up
I’m very glad my videos are still meaningful to many of you
Thank you! this is very useful, but maybe you should use a second camera for the teach pendant.
I think i work with the R-30ib, these robots can to immaculate work. Thats cool seeing smaller robots, that system (cabinet) under the robot is way smaller than the one im used to, and it looks way newer, we dont have the touch screens. The system/console i work with one about the size of a refrigerator and the robot is about 18-20ft in length when laid out
Dude thanks!! Also my dad went to Shelbyville Tech so thats pretty cool!
Good to hear, keep it up… one technology opens to other doors to learn and grow
It is definitely not more advanced than the Yaskawa Motoman, you just know the Fanuc better.
I used to work for Yaskawa Motoman and there were many places I went where they were using both brands and there would always be someone one would say the Fanuc could do more But, there was NEVER something that Fanuc could do that I couldn't also do with the Motoman. Also, many of those functions were free with Motoman, but cost extra with Fanuc. Both are very good robots. To me, the main difference is the cabinet. Keep the control door closed on the Motoman and it will stay spotless. The Fanuc will be full of dust, if it's running in a dusty environment. Not usually a huge deal.
Havent worked with motoman but yes that is so true about the cabinets getting hella dirty on the fanuc ones
@Derno545
Yaskawa (used to be Motoman) seal up tighter than a refrigerator. Keep the door closed (and latched), and they're absolutely spotless.
@@cornpop7805 thats cool man, these are my first robots im learning on i hope to progress further to other robots or jobs as well.. That makes me think of PlayStation vs. Xbox, as playstation is notorious for getting extremely dusty
Thank you for the information. A question for you my dear brother. Which is the most difficult to fix? Is it fanuc or ABB
Very informative 📷 video
I'm sure you've come a long way from when you started your training, but you're making some broad assumptions about the two brands, based on on a very limited experience. Likely the reason you perceive the Fanuc having more "dexterity" than the Yaskawa (Motoman) system, is only because of the size of the manipulator (arm). If your school would have purchased a similarly sized arm, the motion envelope and joint angles would have been similar to that of the Fanuc.
Similarly, if they would have purchased a slightly smaller Fanuc arm, the work envelope for it would have sucked too.
I used to work for Yaskawa/Motoman and I never encountered a situation that Fanuc could do that we couldn't also do and usually easier. We also provided many more programming freebies that Fanuc would charge extra thousands for.
Fucking cool man. I know its been two years since youve posted by I hope you continue the tutorials.
No worries... I’ll be back (sink to the hot boiling molted metal pit)
Nice effort sir. But the program on teach pendent screen is not visible sir.
Hey hope that you’re day is going well.. I’m in a fanuc class how do you build a program.. etc
S vẽ đc hay vậy❤❤
Where is all of the calculations for ramp up, ramp down, quadrature encoder counts..etc?? Or is it just plug and play?
Do we always have to switch to teach mode on that control unit too or only switching on teach pendant will be enough?
Usually the teach pendant is enough but just make sure your read the manual of your type of robot to make sure tho
Dude you need to show is how to use the gripper on fs 100.♥️
Meizinge
You know you're really talented but one thing you lack of is understanding that people can't see the screen that you can see due to the angle and the lighting You should have tested out and it always angles and screen and teach pants so people can refuse can see it
I would be more helpful if you get closer to the pendant to actually see what you doing in it
Why do you need to reload or restore the software when the batteries run low or die...?
Keith Kohl this I can answer from experience. Robots, PLCs, PCs, and other devices require constant power in order to attain its documents, programs, and settings as well. When it comes to robots, they should always have a proper shut down and must have the batteries ready at hand. Now this is also why it is very important for you to always have the robot back in to home position during a maintenance or major shut down in the facility because if it runs out of batteries and it’s been off for a good while it will lose its original 0 homing program position. If let off for a longer time than the software will be lost. It’s a lot like computers truly. When the PC has low CMOS energy, then the BIOs settings will change and you can lose some programs/information.
Teachpendent is not visible, audio part was good
Plz make clear video of Fanuc.. Nothing showing there on tech pendant
Thanks 👍
Türkçe yayında iyi olur yayınlarsanız
can you tell me the procedure to change the language
Is there any option to change the language of the teach pendant?
If you got the procedure to change the language please tell mr
Teşekkürler
r30 i r30 ib different teach (manipulateur) different cabinet (armoire en francais) la trajectoire peut etre ameliorer en temps de cycle u can enhance trajectory too much time repeat same point merci
Fred boulanger merci beaucoup !!!! Enchanté
BATTERIES IN THE MOTORS RUN OUT AND FAIL
Are these robots are related with PLC in anyway?
Paresh yes, there is a section within the controller teach pendant that shows the ladder logic that is used to activate the servo drivers... everything that involves electronics will have some form of logic if you really think about. Nothing can perform without conditions.
@@techlivesmatter9718 tysm😊
What's the point of the music ?
Plz convey this in hindi.
Hello bro can I get training there can I get the details
To me looks like you don't want to share.because the camara was to far away from the teach pendent. I'm been working with ABB robots. And now I'm trying to learn fanuc.
And WHY do we need background music?
kinikinrd because it’s yo boy Berto coming at you fast!!
What's the salary for a certified fanuc robot programmer?
Mobile phone no
@@mohitsaini9193 ?
@@DeeOne88 hello what
@@DeeOne88 I have some need for robotic system
I want to learn all the basics to the advance please help someone
hello guys , can somebody help me ? i'm trying to add a new program for deferent material but i don't know witch software to use ? please need help
Can do ABB IRC5 program
cherche mec... search guy u hav on yt information
THESE PENDANTS LOOSE COMMUNICATIONS FREQUENTLY
Hindi mein milega
Fault is not go ait
Fault not remove sir my system
Bhai fanuc robot operator ki job mil jati he kya
please, write me password robot
I HAVE RAN ONE OF THESE ...NOT USER FRIENDLY AT ALL
Bullshit.