I'm Changing EVERYTHING...(New bow build)
Вставка
- Опубліковано 20 січ 2024
- James heads to the bow n arrow shop to see which 2024 flagship compound bow and arrow he will be using for the year. He ends up walking out with the Bowtech Core SR after doing a speed test in performance mode.
www.bowdisciples.com
aimforapassthrough.com (PUMPSTATION)
deercrossingarchery.com (PUMPSTATION)
podiumarcher.com (PUMPSTATION) - Спорт
Congrats on the new bow. Sweet setup.
Thank you!
James, I was watching one of your other videos when this came up. Thanks for the content!
Awesome, thank you!
Congrats on the new bow and great choice in accessories that bow sounds whisper quiet God bless and I can't wait to see your next video hopefully slinging arrows 100 yards piece out
Thank you!
Excellent! Thank you.
Thank you
Great bow, congrats!
Thank you!
Sweet bow and good set up.
My Core SS should be here this week!
I'm sure you'll love it!
You set your Core SR up very similar to how I set my Core SR except I am running the QAD integrate rest. I love this bow so much!!
Great to hear! I thought about getting that rest
Good choice. I would pick that one too. Look forward to seeing you put it thru its pacers. Wonder if you will start tingering with more things since it so adjustable?
That's the plan!
Sweet Bow!
Thank you! I'm stoked on it
Awesome Rig Bro congratulations, im digging that new Ripcord i may have to get one for my Bow I've got the old Ripcord ace on it ive had really good luck with Ripcord rest over the years been using them 20 plus year's..
I'm impressed with it so far
Went through a gambit of peeps in my hunting bows from 5/16 wayyy down to what im currently using a 3/32”
Money 👍🎯💰 and I’m 65
Awesome!
You can change the launcher angle on the Hamskae as well.
Hope you enjoy the bow!
Thanks! Love the Hamskea also
My dual pin setup I run 20yd and 40yd.(actually is like 42yds. But you get the point) Using both as my floating (travel) pins I can easily get to 150 yds for TAC. SR350, 30 1/2" draw (with My loop), at 72#, axcel carbon pro with avx 31mm housing and ranger pins. For long bombs I prefer the bottom pin because it is closer to the bubble. My eyes don't have to go back and forth between pin and bubble. Great bow, good luck with the new setup!
Thank you!
Just the shop to have the knowledge is super huge. Great setup man. Cheat code
Thanks man!
Core Sr for the win !! Just picked one up myself. The dual trac sight is the cats meow . I just ordered the ripcord ratchet limb driven. Been running hamskea for awhile now but the new ratchet looks legit
Heck yeah! Congrats on the new pig bro
We are on the same page for 2024!
Great minds think alike
I shot both the Core SR and SS last week in addition to the Lift 33 and Alpha X 33. Something about the Mathews just felt really good to me over the others. It was close between the Core SS and the Lift though.
Heck yeah, lot of great options
I can’t believe Bowtech hasn’t sponsored this guy yet… he’s probably their best PR.
Thank you brother
i agree
Noticed that was a top your Javelina. Good deal brother.
That was actually the SR350 👌
I loved the core sr myself also. I shot it and had to have it. I myself went with the 3 pin centermass slider
Great choice brother
@@BowDisciples yessir I do believe so. Excited for foam season and deer season next year!
That thing is sick bro Montana! I just pulled the trigger on a new lift. Yeah I know but I had to buy it. I’ve never had a flagship quality bow and I didn’t end up winning yours. 😂
Congrats on the lift bro!
Great looking bow and those numbers are wonderful , my poundage is up 4 pounds and i don't even get that speed with a slightly lighter arrow out of my V3X 33 , i was going to upgrade it , but replaced my 3D bow with a Title 36 :D
Heck yeah, congrats
@@BowDisciples thanks , debating if I should bring it to TAC this year lol
Why not!@@cseckel62
Awesome bow. You may be able to slide your sight in or out to eliminate the the light around the sight housing. You probably already did that though. As always, excellent content. I look forward to watching you and your crew shooting 3d animals this year. Best wishes!
Thank you!
I second that. Slide her in a bit and you can keep the 3/16 peep.
Bought a shirt for the bow giveaway. Look forward to watching more of yalls videos.
Good luck! Thank you very much 🙏
"Im excited! Im pumped up 😎"
So jacked up
Think I’m holding on to the ss one more season. Gonna make quite a few changes to setup on the next one as well.
Heck yeah, great bow brother
@@BowDisciples well like you have mentioned before “shoulder health”!!! Gotta have it.
Go for a Hamskea 5/32” peep or could you move the sight in one click that should make it fill the peep area?
Site is all the way in but yes that 5/32 will probably be money
cut the shaft a little and get 300 :) nice bow dude that grip is WICKED!!!!!
Heck yeah!
I probably missed it but did you mention any different mind set or hand feeling perspective on the grip change
Not yet. Still haven't played with it
He needs a 5/32 hamskea peep. Its righr in-between 3/16 and 1/8 peep size
Thanks!
@@BowDisciples no problem James! Love the videos.
Appreciate it, thank you 🙏
🏹 👍 ❤️
Thank you sir 👌
They make a 5/32ths peep sight.
Yep, 5/32 is the answer if you don’t want to move the sight in towards the bow.
I'll have to give it a try
Hamskea raptor
I wish their draw cycle in performance wasnt trash.
I feel you
What quiver is that?
What spine is your arrow set up?
300
What stabilizer is that?
Aim for a pass through mule stabilizer. You can get it off of aimforapassthrough.com and use code PUMPSTATION to save 10%
bow shop homies got some elk shape vibes with his lingo 😂
🤣🤣🤣
That paper tuning was hard to watch
For sure, we are so ass
You weren't even an arrow length away from the paper man. Let me guess, you have to broadhead tune with a fixed blade to right? Nevermind man, I don't have a UA-cam channel so what do I know
For sure
@@mikeguy9668you are correct! You should be 3 yards away from the paper when you shoot threw paper. Standing that close is very inaccurate and not a correct paper tune.
Boo another bowtech... Y'all need a hoyt & mathews 😅
🤣
can i win your SR350?
Soon
The click bait was real
How hahaha
For real
Thought you were going to a different brand bow lol
ahhh gotcha haha@@hunterslifestyle625
So new bow BUILD doesnt stand out to you?
That bow was Built at the factory all you did was set it up 🤣 y'all clowns gotta stop using this word build for everything
For sure, we are so trash
@@BowDisciples freakin trash builders....😂
Great decision. I shot all the bows and the core sr was just what fitted me.ive shot bowtech for years and their technology is ahead of everyone else.congrats .
Thanks! Congrats to you too
@@BowDisciples yes sir.anytime.keep up the awsome content.you guys rock.
Thank you