you may not need this advice anymore, but removing the clock setup as well makes things super easy to do in there as it gives you another access point. i put an fm modulator in my 07 and removing the clock was a small extra step but it made getting to that stud in the rear alot easier and freed up some extra arm space.
I know this was like 9y ago you updated it; but I appreciate you more then you know my guy. Subbing just for the effort of making a video because there wasn’t one
I looked on both websites, I can't find one for the Endeavor. I found some for the Lancer, Montero, Eclipse, Raider, Galant, & Outlander. Can you share the link please. Thank you
easy way to mark a hole for drilling is to get a small screw the right thread size cut the head off and file it to a sharp centre point ! screw into hole leavimg a small amount of protrusion, fit the plate over the top ofitand gentlytap with a hammer, this will give you an exact mark for drilling,
That's a really good find, thank you for sharing that I really appreciate it. However the cost is much greater at $280.00 plus $35.00 for shipping = $315.00 Plus another $200.00 for a stereo = $515.00 (ouch!) Personally had my vehicle been a lot newer I think I would spent the extra money for the custom bezel. Another option: Later I found out you can purchase a fiberglass kit layup your dash panel, sand it all out, repaint it for a custom fit just like the one on Ebay. However it's gonna be much more time consuming: lay up, dry time, sanding, and painting. Definitely more than a 2 or 3 hr job. Thanks again and good luck.
Thanks for this video. It is really helpful as I am about to attempt this. Did you ever figure out how to get the error code off on the old radio display?
It says error because the radio isn't communicating with the display module once you replace the stereo. I was thinking about cutting the wire to the old display module but I haven't gone back and attempted this yet, it doesn't really bother me. Thanks for watching.
For the life of me, I just can't pry off the three connectors on the bottom for the HVAC controls... I've tried for mor than 2 hours, and have no idea what to do... They just won't come out. I have an aux cord ready to be installed also, it's driving me insane.
I don't know, I didn't have that problem but I have read a few other people did. Try disconnecting the battery wait 10 minutes reconnect and start the vehicle, it may clear or reset itself. Good luck
Thank you so much for making this video. I have a grey 2005 mitsubishi endeavor I've had it since 2006 and I love my car, it's been loyal to me and I've taken it all over the country. but I hate the fact that I can't listen to my music on my phone or my ipod so I always have to keep making new cd's. I'm so gonna try to do this, my question is where did you find that trim to put on the outside?
+Anabel Villarreal I think so? I used what's called a double din but with enough ingenuity and craftsmanship I'm a firm believer anything can be done. The Stereo shop I originally went to told me replacing the stereo in the same place couldn't be done, they wanted to install it in front of the cup holders/gear shifter No way! Never let anyone tell you it can't be done. Good luck!
Hey, i am attempting this myself with a radio my friend is going to give me. Anyone have any idea where i can find a dash trim that is better for this than cutting? I ha an FM modulator setup and the guy washing the car today threw out my switch with the garbage and looking around for solutions for bluetooth instead I found your video. I hate this panel. It is the thorn in my side. lol Any and all help is appreciated because I cannot live without music on my iphone. Pls help.
Muse TD The whole purpose of this video was an alternative to installing an additional stereo in the cubby, which sits in front of 2 cup holders and the gear shifter. Plus it leaves the stock stereo sitting there dead and useless. Why didn't the company you paid install it where the existing stereo was? You have succumbed my friend, well as I said in this video "it's your vehicle do whatever you want with it, as long as you're happy with it.
Well I just completed installing a pioneer FH-X820BS in my 2004 Endeavor using this method. Turned out really nice. Couldn't or wouldn't have tried it without seeing this video. Thanks. drive.google.com/file/d/0B-SWqb5rezubcm5YSl9DSVpmSjA/view?usp=sharing
I have a question about the wiring I have an 04 also with the infinity system I have 3 plugs coming out of the back of my radio was yours the same if so what did you do for wiring the new radio I bought an adapter kit but it only comes with one plug?
+chris wallace I didn't have the infinity sound system. I would look into purchasing the wiring harness it makes the job a lot easier. You can also check with a car audio shop or shop on-line. I bought my parts at a store called Crutchfield, Good luck to you
you may not need this advice anymore, but removing the clock setup as well makes things super easy to do in there as it gives you another access point.
i put an fm modulator in my 07 and removing the clock was a small extra step but it made getting to that stud in the rear alot easier and freed up some extra arm space.
Agreed
I know this was like 9y ago you updated it; but I appreciate you more then you know my guy. Subbing just for the effort of making a video because there wasn’t one
For anyone reading this in 2017 you can now buy dash kits online from carid and even Walmart
I looked on both websites, I can't find one for the Endeavor. I found some for the Lancer, Montero, Eclipse, Raider, Galant, & Outlander. Can you share the link please. Thank you
***** You're right, I mistook the Galant console for the Endeavor. So disappointing
thy are the same thing
@@boogerbooshoestock They look almost the same. But the Endeavor piece is bigger.
No encuentro
Thank you for making this video! My wife has been wanting a new stereo just like this, but we didn't want it in the cubby either. Thanks!
Thank you for the video, super helpful and gives me a project to do tomorrow!!
Great video
I have my hands full trying to this
I'm glad you gave me a leg up
easy way to mark a hole for drilling is to get a small screw the right thread size cut the head off and file it to a sharp centre point !
screw into hole leavimg a small amount of protrusion, fit the plate over the top ofitand gentlytap with a hammer, this will give you an exact mark for drilling,
thanks for the video.. it helped out alot.
Thanks for making this viseo.
It's a good video, I have to do something like that on my 2010, I can't put music from my phone....
Thank for the video. I just replace my radio. This gave me some good advice and confidence. Did you have to reset you SRS light on the dash?
Hey man on eBay you can find a custom bezel made for a double din radio.
That's a really good find, thank you for sharing that I really appreciate it. However the cost is much greater at $280.00 plus $35.00 for shipping = $315.00 Plus another $200.00 for a stereo = $515.00 (ouch!) Personally had my vehicle been a lot newer I think I would spent the extra money for the custom bezel. Another option: Later I found out you can purchase a fiberglass kit layup your dash panel, sand it all out, repaint it for a custom fit just like the one on Ebay. However it's gonna be much more time consuming: lay up, dry time, sanding, and painting. Definitely more than a 2 or 3 hr job. Thanks again and good luck.
I'm about to do it anyway as a Christmas present for my mom
Thanks for this video. It is really helpful as I am about to attempt this. Did you ever figure out how to get the error code off on the old radio display?
It says error because the radio isn't communicating with the display module once you replace the stereo. I was thinking about cutting the wire to the old display module but I haven't gone back and attempted this yet, it doesn't really bother me. Thanks for watching.
car stereos have been the same for decades and the designers of this vehicle somehow decided to just throw that all away. smh.
For the life of me, I just can't pry off the three connectors on the bottom for the HVAC controls... I've tried for mor than 2 hours, and have no idea what to do... They just won't come out. I have an aux cord ready to be installed also, it's driving me insane.
Good show mate
How do you reset the SRS light? Once i removed and replugged the 2 srs plugs, the SRS light stay on all the time. Thanks for advice.
I don't know, I didn't have that problem but I have read a few other people did. Try disconnecting the battery wait 10 minutes reconnect and start the vehicle, it may clear or reset itself. Good luck
Thank you so much for making this video. I have a grey 2005 mitsubishi endeavor I've had it since 2006 and I love my car, it's been loyal to me and I've taken it all over the country. but I hate the fact that I can't listen to my music on my phone or my ipod so I always have to keep making new cd's. I'm so gonna try to do this, my question is where did you find that trim to put on the outside?
I bought it at Crutchfield
Good luck
What’s new stereo called and will it work on my 05 Galant
does this have the 6 cd changer?
hi can u put any kind of stereo n how many inches does it have to be..
+Anabel Villarreal I think so? I used what's called a double din but with enough ingenuity and craftsmanship I'm a firm believer anything can be done. The Stereo shop I originally went to told me replacing the stereo in the same place couldn't be done, they wanted to install it in front of the cup holders/gear shifter No way! Never let anyone tell you it can't be done. Good luck!
Hey, i am attempting this myself with a radio my friend is going to give me. Anyone have any idea where i can find a dash trim that is better for this than cutting? I ha an FM modulator setup and the guy washing the car today threw out my switch with the garbage and looking around for solutions for bluetooth instead I found your video. I hate this panel. It is the thorn in my side. lol Any and all help is appreciated because I cannot live without music on my iphone. Pls help.
Try Crutchfield
www.crutchfield.com/S-GnXYRKBPzDd/
I actually got it installed on the bottom and it doesnt look or feel bad at all. Quite happy with t
Muse TD The whole purpose of this video was an alternative to installing an additional stereo in the cubby, which sits in front of 2 cup holders and the gear shifter. Plus it leaves the stock stereo sitting there dead and useless. Why didn't the company you paid install it where the existing stereo was? You have succumbed my friend, well as I said in this video "it's your vehicle do whatever you want with it, as long as you're happy with it.
hey bro do u know if u can only conect an aux without puting another stereo
I'm not sure here's a video link I found. ua-cam.com/video/0FpBNI3R-YM/v-deo.html
What kind of radio did you use?
Alpine CDE-W235BT Double Din
This info is also at the end of part 2
Good luck
Well I just completed installing a pioneer FH-X820BS in my 2004 Endeavor using this method. Turned out really nice. Couldn't or wouldn't have tried it without seeing this video. Thanks. drive.google.com/file/d/0B-SWqb5rezubcm5YSl9DSVpmSjA/view?usp=sharing
I have a question about the wiring I have an 04 also with the infinity system I have 3 plugs coming out of the back of my radio was yours the same if so what did you do for wiring the new radio I bought an adapter kit but it only comes with one plug?
+chris wallace I didn't have the infinity sound system. I would look into purchasing the wiring harness it makes the job a lot easier. You can also check with a car audio shop or shop on-line. I bought my parts at a store called Crutchfield, Good luck to you
Beycar
I'm sorry but the Grammer Nazi in me has to correct heighth to height** heighth is not a word