Peggy Pegs Jumbo set - Tested and reviewed
Вставка
- Опубліковано 28 кві 2024
- Peggy Pegs are screw in tent pegs with a unique fixing system that mean they can be used in rocky or root filled ground where you may not be able to insert them to their full depth.
They could be a great solution as a more reliable way of pegging out your tent or awning when on less suitable ground. As well as avoiding some of the potential strains when trying to remove them.
In this video I tested them for speed and staying power to see just how well they worked.
For a 13% discount!! you can use the discount code DTsquared13
Peggy Peg StartKit - peggypeg.co.uk/collections/ca...
Jumbo Set - peggypeg.co.uk/collections/ca...
(These are NON Affiliate links I receive no remuneration from Peggy Peg if you purchase using these links.)
Best channel on UA-cam, thank you sir for your service. Fantastic wee video. A diamond in the rough. ❤
Thank you, that's very kind of you to say. I'm glad you liked it.
Hi Dave, thanks for your reply. I e taken on board your comments, which make perfect sense. I’ve decided that I will make a Peggy pegs purchase of the lihutweight aluminium pegs, which I’ve done some research on. They are practically indestructible, but I will have to pay a premium price for them. I do think it’s a case of you get what you pay for. I believe that, for a pack of four aluminium pegs is around the £20 mark.
Don't forget to use my discount code DTsquared13 to get 13% off. Will save a bit.
Thank you for this review. It was very timely for us as we are looking into using this type of screw peg.
If used instead of standard large pegs for storm straps this should stop you hitting your hand with a hammer whilst first holding the pegs in place :)
Glad you enjoyed it. I didn't push the point to much in the review but there's definitely an argument to make that they reduce the risk of injuries both in trying to extract stubborn pegs and as you say accidentally hitting your hand when banging them in. Peggypeg do make some other products specifically for awning straps and tie downs but I haven't tried these ( . . . yet ).
Hi Dave, you’ve cleared up one or two things for me…firstly, do I use a drill or an impact driver for drilling or removing pegs?
I was originally advised to purchase an impact driver, by a company where I purchased some hard duty pegs from…after listening to your review on Peggy pegs I’m so pleased I didn’t buy an impact driver.
One other thing I noticed in your video. You were testing, using a weight luggage weighing scales, how much resistance each peg was by using the digital scales, which after seeing how much the digital scales cost (£13.99) on Amazon. I’ve used a peg puller before, and the metal hook part of the peg puller started to straighten out rendering it virtually useless. So after seeing how you were pulling different pegs from the ground, would it be a good idea to invest in digital scales (Meilen) to pull the pegs from the ground, after all, the the scales are able to withstand up-to 50 kilograms of pulling weight, and may be a better solution than using a plain peg puller.
I’d be interested to read your comments.
Hi Rich, I'm glad you found the video helpful. An impact driver would be fine until you met significant resistance such as a tree root. At which point it would put so much torque into the peg it would sheer it. I've sheared 4inch steel wood screws with impact drivers before.
In terms of extracting pegs I don't think scales are the way to go. I used them because I was putting pegs into ground that was not SO solid that extracting the pegs would be challenging. It was a test of the peg adhesion rather than the puller.
If you have a situation where a peg is lodged into the ground. For example if it has bent under a rock, gone thru a tree root or the ground has baked hard. Then the force required to pull it will probably be way more than 50kg. The only option is a good quality puller, I've seen some with a brass hook screwed into the end of a mallet handle. Which wouldn't last 5 seconds with a stuck peg.
This is where pepgy pegs have the advantage since unscrewing a stuck peg is easier (more likely to be successful) than pulling it.
Think about how easy it is to remove a screw compared to a nail.
Hope that helps.
Dave
on the negative side its a tad skewed only on 1 point where you talk about the need for a drill, my set came with a tool to do that by hand, although that was 8 years ish ago. and i can see on your desc you have the same tool your just missing the blue bit..
The tool is still in the kit and I do mention it in the video. It comes in two parts the bit that goes in the drill and then an orange handle that it can attache to. I also point out that it's probably not practical to put a lot of pegs in with the provided tool as that would take quite a while.