Any idea what would cause this unit to start and then stop after 3 seconds? Also any tips for if the front light stays on even when in the standing position? Batteries and charger are good. Thanks.
@@NeverDoubtMe23 I have 3 of theses and 3 commercial grade hoovers. After a few months use they have been all been shutting on and off after a few seconds or at random. I have taken all of them apart cleaned everything new belts & bags no change. tried eliminating upright safety switch. tried changing circuit bords no change. very frustrating with no change.
Hello. I was trying to track down an odd noise on mine, and thinking it was something possibly in motor or airway duct, I used your video to break it down. There was nothing there, but I noticed the felt gasket needs replacing. I can't locate it anywhere online, could you offer a suggestion please? I did trace the noise down after reassembling, and it only occurs when pulling the vacuum back a little too rapidly. Strange. Thank you for the great videos and expertise.
Do you know if you are able to use the Oreck brush on these and vice versa? You mention this one is a bit thinner...if it needs to be spit on to fit in, I can do that also haha.
@@PerformanceReviews I notice the price difference between the two machines is about $150...is that brush the only difference between the two? Would seem like a hell of an expensive brush roll haha
The vacuum running lights do not turn off even when the vacuum is turned off. That then drains the batteries. Need to remove battery to conserve charge. Anyone know what is going on and how to fix it?
TTI is one of the better budget consumer brands, I've got a Hoover T series bagless machine and it's not half bad compared to its competition. On another note, I had someone preaching about Shark vacuums and how they were so good, well, my new style Bissell Powerforce Bagged put them in their place, it's quieter, lighter, and cleans better with less mess and less maintenance, I've got 3 bagged Powerforce machines, 2 are the classic Samsung style, one's a 10 amp and one's a 12 amp, and one is the new style, They didn't do too bad with the redesign, I've put some hours on it and I like it, it's dead simple and easy to use, unlike a Shark, it's also lighter than an Oreck, also unlike a Shark
So basically it’s a copy cat version of Oreck as far as the set up of the motor. I’ve noticed oreck & hoover is very close on the set up how it’s set up
I knew I could count on you to have a video for this! Mine clogged up and I was able to take it apart and find the culprit very easily thanks to you!
Dang! Performance Reviews knows almost every trick in the book!
one of the best dirty air upright designs I have ever seen.
Where might I find a replacement for the microswitch for the upright sensor?
Any idea why the vacuum only works on the lowest speed regardless ok of switch position?
Sounds like something broken bring it to your local vacuum repair store.
No kidding!!!.. that's why I asked your advise, thanks for nothin
😅😢😂
Any idea what would cause this unit to start and then stop after 3 seconds? Also any tips for if the front light stays on even when in the standing position? Batteries and charger are good. Thanks.
Did you ever figure this out? Mine is doing the same
@@NeverDoubtMe23 I have 3 of theses and 3 commercial grade hoovers. After a few months use they have been all been shutting on and off after a few seconds or at random. I have taken all of them apart cleaned everything new belts & bags no change. tried eliminating upright safety switch. tried changing circuit bords no change. very frustrating with no change.
@@bentystoystore3768 Ah, thank you sir, I have tried all the above as well and still nothing...very frustrating.
Hello. I was trying to track down an odd noise on mine, and thinking it was something possibly in motor or airway duct, I used your video to break it down. There was nothing there, but I noticed the felt gasket needs replacing. I can't locate it anywhere online, could you offer a suggestion please? I did trace the noise down after reassembling, and it only occurs when pulling the vacuum back a little too rapidly. Strange. Thank you for the great videos and expertise.
Your local vacuum store will have you covered.
@@PerformanceReviews Thank you very much!
Do you have the brush roll part number for this?
There is a link in the description.
what sie/kind of bit none of mine are working,
My hoover onepwr keeps shutting off after 5 seconds, and all the lights blink on and off. Can you tell me what would cause that, and how to fix it
Bring it to your local vacuum store and have them fix it.
Help! I can't find the brushroll anywhere online!
amzn.to/3PMmxNO
@@PerformanceReviews THANK YOU!!!!
Do you know if you are able to use the Oreck brush on these and vice versa? You mention this one is a bit thinner...if it needs to be spit on to fit in, I can do that also haha.
Yes
@@PerformanceReviews I notice the price difference between the two machines is about $150...is that brush the only difference between the two? Would seem like a hell of an expensive brush roll haha
The vacuum running lights do not turn off even when the vacuum is turned off. That then drains the batteries. Need to remove battery to conserve charge. Anyone know what is going on and how to fix it?
I have the same problem contact Hoover for replacement
Is the oreck battery able to go on the hoover?
Of course
TTI is one of the better budget consumer brands, I've got a Hoover T series bagless machine and it's not half bad compared to its competition. On another note, I had someone preaching about Shark vacuums and how they were so good, well, my new style Bissell Powerforce Bagged put them in their place, it's quieter, lighter, and cleans better with less mess and less maintenance, I've got 3 bagged Powerforce machines, 2 are the classic Samsung style, one's a 10 amp and one's a 12 amp, and one is the new style, They didn't do too bad with the redesign, I've put some hours on it and I like it, it's dead simple and easy to use, unlike a Shark, it's also lighter than an Oreck, also unlike a Shark
So basically it’s a copy cat version of Oreck as far as the set up of the motor. I’ve noticed oreck & hoover is very close on the set up how it’s set up
The same company made in the same factory not sure how it could be a copycat?