I was hoping with a name like O’Reilly you were based in Ireland, but unfortunately you’re not. after seeing this I would have called you having the same issue with my Mercedes. Super informative upload 🙏
I'm addicted to this channel ! Jimmy makes it look so easy and comes across as a complete professional in his line of work. My brother-in-law has a problem with his Audi A3, something to do with lamda sensors ?? I think he said .....I said to get in touch with O'Rileys , not a huge drive from Leicester and I'm confident Jimmy would get him sorted.
Hi and thankyou for all the lovely videos. We don't have many diesel cars here in Canada, only tucks. Fascinating stuff on just how screwed up you can make a diesel engine. I do diagnostics but mainly on US cars and trucks so the information on these vehicles is invaluable should I get one. Same deal as a lot of repair, visual inspection first and don't touch anything until you have too. Sometimes the fault jumps out at you. Listen to the customer and try and read between the lines. They sometimes forget all that has been done or happened. Like "I fitted an aftermarket radio and it did not work after that". One I had recently was I fitted your repaired manifold and now the throttle does not work LOL. He knocked a wire off the throttle body LOL. Sometimes you just know. Been at it over 45 years.
This is exactly what happened to our c250 cdi 2012 2.1L first the boost pipe went then a few weeks later I had to replace Differential pressure sensor. How ever a forced regen was done so im lucky it didn't cause damage to the dpf. Great video
After replacing the sensor couldn't delete the dpf fault so did a full reboot . To clear the code. Now I have learned the sequence how to clear codes thanks mate
Two things that should be avoided forced regen of a DPF and using easystart on a common rail diesel engine you will always get the haters keep up the good work thanks for sharing your knowledge.
MB DPF absolutely do need to be cleaned when a system sensor has failed. We did an ML250, same engine. DPF upstream temp sensor had failed, client kept driving with the MiL light on. Vehicle was on ramp, so injected Launch fluid via the upstream temp sensor port. Job done, there are many self-proclaimed DPF specialists who are more concerned about selling their snake-oil additives than actually learning about how to maintain a modern diesel engine in a healthy condition.
Is MB DPF the exhaust mainfold temp sensor? If that failed and you clean the DPF, wouldn't that still send an error message to the ECU? Although maybe no check engine light?
Great Video as always, Great solution. Looking at you selecting the different items to load into the live data stream, it's a shame you can't save a selection of checks to automatically load for that error type. (Pressure sensor, etc) Save time. (I know you can save sample, but seems you can save the selection) Mr Goodle reply for fault P246309 was (Excluding your videos which were first in the list) "the dpf is not working as it should be and will need replaced." LoL .O'Riles does it again. Thanks for sharing once again, take care
Top man jimbob , love your vids I like how you explain everything you're doing throughout it all , making it all worth while for new viewers, i watch most of you're videos so I understand what your talking about, but to new viewers they can learn so much because of you walking through every step of the process mate 👍.
Hi Jimmy Do you know if the radiator shutter mechanism on the c class (250 CDI 2012) is tied into the regen for the DPF? customers car has a B218E :13 fault code in the PCM. Actuation of the radiator shutters has a malfunction. There is an open circuit. I know from working on fords that the grille shutter mechanism can effect the regen so wondered if you knew if this was the same for mercs.
A question Jimmy. Some time ago you sprayed your cleaner into an exhaust manifold. Is this safe to do, was thinking maybe an exhaust valve could be open and product could get into the cylinder. I wish we could get that cleaner here in New Zealand
Great video, but I think best way to deal with a dpf is take it off and have it cleaned on a flush machine as aggressive cleaning olwuth chemicals damages metals inside dpf and it will get blocked again. Had mine done on a machine amazing difference compared to chemical cleaning through the sensor pipes.
Jimmy if you go back 8 or 9 months you had a topdon Phoenix plus with. Jlm gun winns fluid and you was doing a regeneration. At that time I would take that you don’t know how to do a reset on the dpf .how did you come to find how to do that at the start .
Oh not sure just learned over time. Some cars won't accept a reset so you have to do a regen. But I always flush it first so its safe to do the regen after
It's great to listen to somebody who actually knows what he's doing!! Your professionalism is brilliant mate. 😎👍
Thanks 👍
I was hoping with a name like O’Reilly you were based in Ireland, but unfortunately you’re not. after seeing this I would have called you having the same issue with my Mercedes. Super informative upload 🙏
Dpf whisperer strikes again 👍 legendary work 🙌
Thanks again!
@@ORileysAutos no sir thank you for taking the time to put content like this on here 👍
I'm addicted to this channel ! Jimmy makes it look so easy and comes across as a complete professional in his line of work. My brother-in-law has a problem with his Audi A3, something to do with lamda sensors ?? I think he said .....I said to get in touch with O'Rileys , not a huge drive from Leicester and I'm confident Jimmy would get him sorted.
Hi and thankyou for all the lovely videos. We don't have many diesel cars here in Canada, only tucks. Fascinating stuff on just how screwed up you can make a diesel engine. I do diagnostics but mainly on US cars and trucks so the information on these vehicles is invaluable should I get one. Same deal as a lot of repair, visual inspection first and don't touch anything until you have too. Sometimes the fault jumps out at you. Listen to the customer and try and read between the lines. They sometimes forget all that has been done or happened. Like "I fitted an aftermarket radio and it did not work after that". One I had recently was I fitted your repaired manifold and now the throttle does not work LOL. He knocked a wire off the throttle body LOL. Sometimes you just know. Been at it over 45 years.
This is exactly what happened to our c250 cdi 2012 2.1L first the boost pipe went then a few weeks later I had to replace Differential pressure sensor. How ever a forced regen was done so im lucky it didn't cause damage to the dpf. Great video
These aren't as fragile as some other dpf
After replacing the sensor couldn't delete the dpf fault so did a full reboot . To clear the code.
Now I have learned the sequence how to clear codes thanks mate
@@TheChrisco1969Hi what do you mean by a "full Reboot"?
Two things that should be avoided forced regen of a DPF and using easystart on a common rail diesel engine you will always get the haters keep up the good work thanks for sharing your knowledge.
MB DPF absolutely do need to be cleaned when a system sensor has failed.
We did an ML250, same engine. DPF upstream temp sensor had failed, client kept driving with the MiL light on.
Vehicle was on ramp, so injected Launch fluid via the upstream temp sensor port.
Job done, there are many self-proclaimed DPF specialists who are more concerned about selling their snake-oil additives than actually learning about how to maintain a modern diesel engine in a healthy condition.
Is MB DPF the exhaust mainfold temp sensor? If that failed and you clean the DPF, wouldn't that still send an error message to the ECU? Although maybe no check engine light?
Great Video as always, Great solution. Looking at you selecting the different items to load into the live data stream, it's a shame you can't save a selection of checks to automatically load for that error type. (Pressure sensor, etc) Save time. (I know you can save sample, but seems you can save the selection)
Mr Goodle reply for fault P246309 was (Excluding your videos which were first in the list) "the dpf is not working as it should be and will need replaced."
LoL .O'Riles does it again.
Thanks for sharing once again, take care
Proper job 👍
Your the best mechanic gbu
Great job👍🏻
Top man jimbob , love your vids I like how you explain everything you're doing throughout it all , making it all worth while for new viewers, i watch most of you're videos so I understand what your talking about, but to new viewers they can learn so much because of you walking through every step of the process mate 👍.
Jimmy any reason you recommend orignal Mercesdes DPF pressure sensor instead of the equivalent Bosch part which is half the cost?
It's just difficult to find a bosch. Most factors around here supply any random brand
should be call the soot doctor 😂
Boss channel lad DPF Top Don 👑
Hi Jimmy
Do you know if the radiator shutter mechanism on the c class (250 CDI 2012) is tied into the regen for the DPF? customers car has a B218E :13 fault code in the PCM. Actuation of the radiator shutters has a malfunction. There is an open circuit. I know from working on fords that the grille shutter mechanism can effect the regen so wondered if you knew if this was the same for mercs.
what kind of price would the service you just did cost thanks ps i drive a Mercedes same
prob thanks
Hello mate do u see b60 exhaust back pressure were is this being picked up from . When dpf sensor is removed its still reading
Awesome work thanks for your efforts ❤...
Thank you so much 😀
A question Jimmy. Some time ago you sprayed your cleaner into an exhaust manifold. Is this safe to do, was thinking maybe an exhaust valve could be open and product could get into the cylinder. I wish we could get that cleaner here in New Zealand
Jimmy question for u: the solution that u put inside dpf will it clean both soot and ash or just the soot?
It cleans loose ash. Nothing cleans ash solids
Great video, but I think best way to deal with a dpf is take it off and have it cleaned on a flush machine as aggressive cleaning olwuth chemicals damages metals inside dpf and it will get blocked again. Had mine done on a machine amazing difference compared to chemical cleaning through the sensor pipes.
Does a blocked dpf cause the turbo to knackered up? Anyone.....
Thank you for your advice to me recently about what to use ... gbu I will order it in Amazon this Forte dpf cleaner
Jimmy if you go back 8 or 9 months you had a topdon Phoenix plus with. Jlm gun winns fluid and you was doing a regeneration. At that time I would take that you don’t know how to do a reset on the dpf .how did you come to find how to do that at the start .
Oh not sure just learned over time. Some cars won't accept a reset so you have to do a regen. But I always flush it first so its safe to do the regen after
Please ,kindly explain all the parameters and it's values
Thank you bro
Sounds like the extra large parts cannon was used again!!
One sensor that isn't a lot of money is a parts cannon?
Jimmy any irish blood in ya?
If you’d get a dime for every text message…. 😉
its nonsense, i have had two mercs with blocked dpf
Colour me suspicious but that "Merc" engine looks quite PSA,,, :-)
You’re correct