Man...some of the vehicles you guys get down there are just amazing (I'm sure in many cases the same is true in reverse with regards to North America)...I would buy that vehicle in a heartbeat if it were available here. Nothing on our market even comes close to fitting the bill this vehicle does. Cheers from Canada.
Divot repair tool. They make inexpensive aluminum ones that are a bit thicker that work pretty well for those plastic fender guard keepers. Some of the thinner ones can make good knob pullers too.
Man the days of cutting your Support bar are over. Used to give me anxiety knowing you increase your mortality rate when you cut it to clear the intercooler lol. Also seeing a overflow bottle that isn't yellowed is impressive
The exhaust brand reminded me of my younger years growing up in Puerto Rico and bodydoarding. I had a Manta PRO-X3T which was the bees knees 25 years ago and 1 of the top brands of bodyboards at the time and also made in AU.
@@BennysCustomWorks hi Benny, thanks for your reply, i have had a boost gauge installed prior to the intercooler installation, its still has the same amount of boost, i only do long straight cross country drives, so there is no traffic, and i keep the same speed 100kmph to avoid traffic fines
I see you tracked down the dark FGX pillar trims and headliner at some point. Good stuff 👍 Can't stand the "sand" ones, they make the interior feel like a fleet car.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Your past couple videos with the driving footage look great. Nice addition Gian. Keep it up.
Looking forward to another "Benny and Scotty nerding out about cars" session next week!
Great vid mate.
Wurth make a great set of pliers for trim clip removal. I used one for 10 years fitting for Toyota.
Luv seeing the workhorse get some bling
07:38 "Gian, edit that out" Gian: *doesn't edit it out*
Nice easy job, satisfying to watch 😁
Greetings from Southwest Texas 🇺🇸 🦵on 🔥
Exhaust sounds great Benny. It's not droney or farty. People seem to forget that noise doesn't equal power.
Man...some of the vehicles you guys get down there are just amazing (I'm sure in many cases the same is true in reverse with regards to North America)...I would buy that vehicle in a heartbeat if it were available here. Nothing on our market even comes close to fitting the bill this vehicle does. Cheers from Canada.
Nothing new like that here either unfortunately :(
Nice mars bar
Divot repair tool. They make inexpensive aluminum ones that are a bit thicker that work pretty well for those plastic fender guard keepers. Some of the thinner ones can make good knob pullers too.
Nice set of mods this time round. Sweet ute
Since you use Wurth stuff you should know they do a very well thought out trim removal tool.
Benny, no such thing as a standard daily. 🏎️🏎️🏎️🏎️🏎️
Always happens haha I tried so hard to just daily my old 3rz powered hilux.... next minute I've built a log manifold and bought a haltech haha
Man the days of cutting your Support bar are over. Used to give me anxiety knowing you increase your mortality rate when you cut it to clear the intercooler lol.
Also seeing a overflow bottle that isn't yellowed is impressive
It’s almost new, fitted it with the new engine. It’s a Dayco one from Sparesbox
@@BennysCustomWorks god i miss my 6t ute haha. Got a tb48 patrol now so i guess its the same 🤷♀️
Shiny, nice sounding, great mods, you need to be Mighty Bennys Custom Works Mods, bloody great video Benny, cheers from Melbourne
Mighty Skid Benny's Custom Works Mods Factory?
Vessel Tools 970 CR-120 9” automotive clip remover. Japanese made, awesome grip. I really like it
Great video Benny!
Your knees are on fire! Wait until you're over 60🥺 they go on strike 🤣
Your beard is eating a pack of twisties lol…
Sounds smick !!👍🍻
You needed the old walk past bumper removal, like on the old driveway days
1:30 is that the christmas tree style clips or the ones that are 2 piece?
snap on do a grouse metal clip demon removal tool, been using it for years in my shop and does the job mate
Can I ask why you have chosen to keep the factory airbox rather than the battery relocation?
Looks more factory that way and isn’t needed for my power goal.
another swt episode bro! Chur!
The exhaust brand reminded me of my younger years growing up in Puerto Rico and bodydoarding. I had a Manta PRO-X3T which was the bees knees 25 years ago and 1 of the top brands of bodyboards at the time and also made in AU.
I just need a trans cooler then back on the road but Nop I keep blowing them apart help
Nice work. Should get it detailed since you've given it a bday mechanically
Coming soon :)
Name of the 2nd track in the video?
Toledo do a clip/trim removal tool, comes in a set of 2 from Supercheap for about $40
Enjoying the video. Did it already have an f6 cooler? I'm a bit Rusty on fg/X models for intercoolers.
i installed an intercooler onto my turbo pickup, it comes with no intercooler stock, but now my consumption went up ... any ideas?
Sounds like you have a boost leak or a heavy right foot :)
@@BennysCustomWorks hi Benny, thanks for your reply, i have had a boost gauge installed prior to the intercooler installation, its still has the same amount of boost, i only do long straight cross country drives, so there is no traffic, and i keep the same speed 100kmph to avoid traffic fines
I see you tracked down the dark FGX pillar trims and headliner at some point. Good stuff 👍
Can't stand the "sand" ones, they make the interior feel like a fleet car.
A Barra-powered car that DOESN'T have a 4 inch straight through drainpipe exhaust with a screamer pipe? Somebody pinch me, I must be dreaming!
You all know you're only here for the ASMR of Benny's beard lightly caressing the microphone....
Only honest Barra owner ever lol
snap-on have proper clip removal tools they work super well couple of different types.
only $799 + GST?
@@yowie0889 Individually, but the set of two in a blow-mold case is just $1499!
Fewerri Flacon
I have a standard FGX (na) wondering what it cost all up ?
Beard, meet mic. Mic, meet beard
Fark... wish I could fit an intercooler and complete exhaust in 10 mins 28 seconds...... 🧘🏼
You need to do it via montage like Benny.
Microphone crackle crackle was a bit how ya goin
Benny your mic is doing the beard thing again
Well said Benny if people bought home country built products we would have better quality product around the world
Me n bro saw laytest falcon n thoughts were front looks shit. But i like it now. Could be after mustangs. Cheers
New air cleaner please???
Time you got some kneepads, concrete and knees do not mix! only going to get worse!
Where is the Ferrari swap? I just see a tweaked Barra.....which is perfectly fine to me👍
Started as an in joke because of the Ferrari 488 GTB wheels
Step-cooler, what are you doing??
Well it’s not my biological intercooler but I take care of him full time now so he’s my step cooler.
It's not polite to tell a bloke you've got a better tool. That said...
Beard rustle doesn't help.
Moist