@@oldherbalist4906 посмотри мои ролики😋 это не мой метод. Я лучше найду ту вещь которая нуждается в реставрации. У друга на даче кстати видео валяется в огороде подобный топорик. Думаю надо отжать😁
That's not a meat cleaver. It's a French styled ice cleaver. Between the welding and grinding you softened the metal because you weren't cooling it as you worked. Then you didn't retemper the steel correctly. The blade was also bent, which when hot you could have fixed. You also messed up the bevel, it's angled that way for a reason, so the cut product rolls off the blade. Bluing isn't food safe, so this blade can never be used again for anything ANYONE WILL EVER EAT. You ruined it. So many mistakes, such a poorly thought out job and not any research on how to do it correctly. The saddest thing is over 3 thousand people think you did a good job instead of potentially poisoning people. SMH...
You didn't fill the dimples in the metal, bluing isn't food safe, and I'm not even sure that this was even an old cleaver. Horrible, awful, very bad time
Yeah … you are absolutely right. If you look at the original handle it enabled you to use the finger groove, his handle defeats the purpose completely. Great point
this video is fake, reasons why, 1. shape is to modern 2. with so much rust you would at least expect dimples in the blade after it is removed and this blade had nun. 3. the heat treatment that was used will never work with a blad that big and a torch that small
it realy doesn't seem old at all. just seems like some dude put on some weird rustik handle( wood looks clean) and made the metal rust intentionally. the bright orange of the rust tells me this is "new" rust.
That's some lovely work on the handle. Nice polishing on the blade, too, but I'm confused by the design. Why does a meat cleaver need teeth along the spine?
It's called _jimping_ and it's for your thumb to rest on and push against for better stability when making a slice as opposed to a chopping motion. At least, the teeth close to the handle are; for the rest? I would assume uniformity and the rule of cool were applied~
@@alexisgrunden1556 No, they're for sawing through bones. I have a knife very similar to that one that I bought because I heard it was super easy to fake restoration videos with since it's easy to make it look old and rusty, and now I'm seeing the proof of that.
Bro did NOT apply that rust well enough if it came off that easily. F for the attempt at faking a restoration of a brand-new meat cleaver. FYI, saltwater makes things RUSTIER using those processes, not less rusty. Also FYI, that's not even true electrolysis, nor is that power system efficient, if even a power system, nor does said system take 8 hours and turn the water that color and the knife in that condition. Electrolysis is putting a metal connected to a terminal of a battery system into a vat of a chemical (not water, not salt water) and putting an activating strip into the water connected to the opposite polarity to attract ions from the strip onto the metal. It's used for nickel, copper, titanium, and sometimes gold, coating, but never for rust removal, because it *doesn't work for that*. I'm 3:42 into the video and I can already tell he's failed in three different aspects of restoration. He even shows off his sub-par welding skills at 7:03 to prove he's the one that put those welds on in the first place! Amazing! Also, at around 9:05, you can see how badly he failed to properly sharpen the blade, as it's now off-balance and dull and the sanding removed more material than just keeping the straight edge, so now it won't cut cleanly or straight. Aaaaaand, of course, he couldn't even temper or heat treat it properly. And then sands it after tempering. And then he cold blues it? That's unsafe and doesn't do anything. You clearly know how electrolysis works, just nickel coat it. That would provide better rust protection and make it actually usable. You can literally see how the metal tried to reject the bluing process (as it's designed to). It shouldn't take that much work to blue something. Not to mention, by the time he gets to wiping the grease or whatever that is onto the knife, most of the bluing has been sanded off anyway, making it even less usable. I'm also confused why, at 17:55, are you using a (metal intended) polishing wheel on wood, instead of just using stain and proper oil that would actually protect it? Are you trying to create "Restoration Very Rusty Old Cleaver Again"? Or, alternatively, take a nice Clorox wipe and wipe off the handle to get the same effect. Also, is that literally cooking oil or is your linseed oil actual shit?
And, for the record for anyone reading this, that knife likely came into production around the year 2017-2021, as knives with a finger hold and a saw like that were often multiple separate tools until people got too lazy to do it otherwise.
오늘 억울한 일이 있었어요.난 어두울때 노란색이 잘안보여요. 그래서 야간운전을 못해서 앞차를 보내고 뒤따라 간적이 있어요. 오늘도 그경우였어요. 억울하게 고자질로 혼났어요. 서러워서 혼자 울었어요. 그리고 그 언니한테 지나가면서 욕을 했어요. 내가 욕하는 사람이 아닌걸 다 알기에 내 기분을 알거예요.평상시 좋은 이미지이면 한번씩 화낼때 이용할수 있는 카드로 효과가 있어요. 욕으로 그때해서 또하라면 뭐라 했지? 개같은 년? 있는것들이 더 해? 이렇게 한것같아요. 천국문도 조건을 바꿔놨다는 걸 있었어요. 잠을 자는데 나에게 예언할 기회를 주셨어요. 더이상 나라를 위기에 몰아넣지 말고 이재명이 대통령이 돼 국민들이 안정을 찾고 나또한 만사형통해서 엄마랑 행복하게 살고 싶어요.
Schöne Arbeit. Ich glaube aber das das Härten nicht funktioniert hat, weil die Klinge nicht heiß genug war. Die Farbe muss durchgehend hell orange sein.
Не поняла, а зачем сварка на обеих сторонах лезвия ножа, каплевидная правда, но зачем? Тем более дуговая. И это явно не ржавчина и не диффузия какого-то металла в лезвие. Может там были каверны? И ещё закалка странная и отпуск не сделан, да и чернение явно не для бытового предмета (для мяса, приготовления блюд ну никак). А так - кропотливая и красивая работа.
Amazing restoration on this old rusty Cleaver. I've never seen a Cleaver like this before. It's really beautiful. I love the handle that you made for it as well. It looks fabulous all put together. Thanks for sharing your video. I really enjoyed watching it. Looking forward to your next one. Stay safe and healthy.
The blade shape makes absolutely no sense. What possibly would this be used for? The bladestock too thick for a proper cleaver. I have been around food prep and butchering for a time. People don't make tools without purpose. I'm calling this a fake.
i would have used that to cook with before cleaning. Awwwww man i was so happy with those bubbles on the side before you started filing them off!! they made that blade unique and special it looked so badass with them on it! you disappointed me when you STARTED filing them off! so sad
Only thing that bugs me with this is that when he uses the brushes he just barley scraps it use some elbow grease and quit relying on your power tools to do it all for you
Классный тесак получился! Браво, мастер! Спасибо за видео!
I wonder what the large cutout is for ...? Snapping bones maybe...?
Awesome restoration ❤
Beautiful job bro. Like from India.
That is gorgeous. That dark handle just fit's that blades look perfect. Glad I decided to Subscribe recently. I find myself binge watching.
Que trabalho soberbo. Parabéns.
Sucesso sempre.
Why did you electrically solder these spots before causing the blade to rust?
Shhhhhh. You'll ruin the channel....🤣🤣
Thats a perfect job.but The diseginer is beautifull..good job..note 10
A lot of hard work - BEAUTIFUL - THANK YOU!
Me gusta ver que se salven y le den otra vida a las cosas gracias y espero poder ver mas
I would have enjoyed seeing the welding, I'm a beginner welder and am always looking to pick up techniques
Good work ❤
You sir are a master, Beautiful Workmanship!
Very nice 👍
Прикольно когда нибудь я тоже отреставрирую такой тесак, а пока только мечты😁😋
Спрячь новенький тесак где-нибудь в укромном и сыром месте прямо сейчас.И годика через три будет тебе счастье ...
@@oldherbalist4906 посмотри мои ролики😋 это не мой метод. Я лучше найду ту вещь которая нуждается в реставрации. У друга на даче кстати видео валяется в огороде подобный топорик. Думаю надо отжать😁
😂😂😂👏👏👏
@@oldherbalist4906 Зачем ждать пару лет, когда можно сделать как автор,просто положить в раствор на пару дней и вуаля 🤣
@@oldherbalist4906 🤣🤣🤣👍
Закалку как Боженька сделал...
Beautiful !
Good job😊
Holy smoke, you literally put random weld beads on the sides before rusting it up.
The rusteration looks good but I was thinking kind of the same thing.
This is my third and last with these guys. The other two were knife restorations and the comments were similar.
Those were fossilized chunks of meat
I was thinking the same thing. We’re not idiots. That obviously wasn’t an old cleaver.
It's not a meat cleaver and he ruined the temper and then ruined the blade with toxic bluing agent. BLUING ISN'T FOOD SAFE...
superrrr eline sağlık usta
Super, super mișto.
Great restor of the clever but why blue it?
well done
That's not a meat cleaver. It's a French styled ice cleaver.
Between the welding and grinding you softened the metal because you weren't cooling it as you worked. Then you didn't retemper the steel correctly. The blade was also bent, which when hot you could have fixed. You also messed up the bevel, it's angled that way for a reason, so the cut product rolls off the blade.
Bluing isn't food safe, so this blade can never be used again for anything ANYONE WILL EVER EAT. You ruined it.
So many mistakes, such a poorly thought out job and not any research on how to do it correctly.
The saddest thing is over 3 thousand people think you did a good job instead of potentially poisoning people.
SMH...
As others have mentioned not good and why bluing? No captions or details on what was being done.
sure bee nice to find rusry crusrting stuff around here cheep to restore or some place i couild buy and get to restore
You didn't fill the dimples in the metal, bluing isn't food safe, and I'm not even sure that this was even an old cleaver. Horrible, awful, very bad time
Good Job on the Restoration of the rusty cleaver. I woulda clean the metal better to look great..
Это лучшая закалка что я видел шедевр!!!!
eto tochno :D
awesome .. is better.... but i Like!!
great job, looks fabulous……⛏️⚒️⚔️🔧🛠️🔨🔩👍
The profile of that handle just rendered that rear finger groove completely useless..
I mean...I *think* it was supposed to be decorative from the start. But you're also not-wrong.
Yeah … you are absolutely right. If you look at the original handle it enabled you to use the finger groove, his handle defeats the purpose completely. Great point
Good job! Thanks.
It would be nice if you explained what coatings you are using, grit, etc. Thank you.
this video is fake, reasons why,
1. shape is to modern
2. with so much rust you would at least expect dimples in the blade after it is removed and this blade had nun.
3. the heat treatment that was used will never work with a blad that big and a torch that small
That Look, SICK man!! I would put a little bit of dark red stain on the handle to make it look like a bloody handle.
Perfect!!! 👍👍👍👍👍
Why all the negative comments about bluing etc? He might like the look and it won't be used for ice unless ice sculpting.
finally i see a cut crocodille cleaver !!
Афигеть красивый клинок
This guy is good!
it realy doesn't seem old at all. just seems like some dude put on some weird rustik handle( wood looks clean) and made the metal rust intentionally. the bright orange of the rust tells me this is "new" rust.
Essa foi envelhecida artificialmente
Vyborne relace.
Nice work, maybe next time you should have unoiled the metal before getting the "blue" liquid on it
Bluing is toxic...SMH
So many things wrong with this restoration...But...I still watched the whole video and the author got the ad revenue. So good job for that.
Fantástico 😃
I want that in my kitchen. It would make fast work of any joint.
It's also not safe to use around food.
That's some lovely work on the handle. Nice polishing on the blade, too, but I'm confused by the design. Why does a meat cleaver need teeth along the spine?
It's called _jimping_ and it's for your thumb to rest on and push against for better stability when making a slice as opposed to a chopping motion. At least, the teeth close to the handle are; for the rest? I would assume uniformity and the rule of cool were applied~
@@alexisgrunden1556 No, they're for sawing through bones. I have a knife very similar to that one that I bought because I heard it was super easy to fake restoration videos with since it's easy to make it look old and rusty, and now I'm seeing the proof of that.
Ficou legal, mas poderia ter sido mais caprichoso.
I think when you heat treat anything you need to temper it as well because it undoes the brittleness of the metal object
That heat treat was crap he just wasted gas and time 🤣
@@hippiemiller Even worse, bluing is not food safe. That cleaver is toxic now. And not a meat cleaver either.
Correct. That was just to make it look cooler and make the video last longer.
Complimenti!!! Ottimo lavoro. Bravo.
Bro did NOT apply that rust well enough if it came off that easily. F for the attempt at faking a restoration of a brand-new meat cleaver. FYI, saltwater makes things RUSTIER using those processes, not less rusty. Also FYI, that's not even true electrolysis, nor is that power system efficient, if even a power system, nor does said system take 8 hours and turn the water that color and the knife in that condition. Electrolysis is putting a metal connected to a terminal of a battery system into a vat of a chemical (not water, not salt water) and putting an activating strip into the water connected to the opposite polarity to attract ions from the strip onto the metal. It's used for nickel, copper, titanium, and sometimes gold, coating, but never for rust removal, because it *doesn't work for that*. I'm 3:42 into the video and I can already tell he's failed in three different aspects of restoration. He even shows off his sub-par welding skills at 7:03 to prove he's the one that put those welds on in the first place! Amazing!
Also, at around 9:05, you can see how badly he failed to properly sharpen the blade, as it's now off-balance and dull and the sanding removed more material than just keeping the straight edge, so now it won't cut cleanly or straight.
Aaaaaand, of course, he couldn't even temper or heat treat it properly. And then sands it after tempering. And then he cold blues it? That's unsafe and doesn't do anything. You clearly know how electrolysis works, just nickel coat it. That would provide better rust protection and make it actually usable. You can literally see how the metal tried to reject the bluing process (as it's designed to). It shouldn't take that much work to blue something. Not to mention, by the time he gets to wiping the grease or whatever that is onto the knife, most of the bluing has been sanded off anyway, making it even less usable.
I'm also confused why, at 17:55, are you using a (metal intended) polishing wheel on wood, instead of just using stain and proper oil that would actually protect it? Are you trying to create "Restoration Very Rusty Old Cleaver Again"? Or, alternatively, take a nice Clorox wipe and wipe off the handle to get the same effect. Also, is that literally cooking oil or is your linseed oil actual shit?
And, for the record for anyone reading this, that knife likely came into production around the year 2017-2021, as knives with a finger hold and a saw like that were often multiple separate tools until people got too lazy to do it otherwise.
And how did the growths, or warts, how to call them correctly, be removed from the knife?
Parabéns pelo magnífico trabalho. Ficou um cutelo lindo.
i agree
Didn't you see the weld pittings on blade's center?? 🤔🤔
I'm pretty sure that blueing isn't food safe. Using this blade in kitchen may have serious health consequences.
오늘 억울한 일이 있었어요.난 어두울때 노란색이 잘안보여요.
그래서 야간운전을 못해서 앞차를 보내고 뒤따라 간적이 있어요.
오늘도 그경우였어요.
억울하게 고자질로 혼났어요. 서러워서 혼자 울었어요. 그리고 그 언니한테 지나가면서 욕을 했어요. 내가 욕하는 사람이 아닌걸 다 알기에 내 기분을 알거예요.평상시 좋은 이미지이면 한번씩 화낼때 이용할수 있는 카드로 효과가 있어요.
욕으로 그때해서 또하라면 뭐라 했지? 개같은 년? 있는것들이 더 해? 이렇게 한것같아요. 천국문도 조건을 바꿔놨다는 걸 있었어요. 잠을 자는데 나에게 예언할 기회를 주셨어요. 더이상 나라를 위기에 몰아넣지 말고 이재명이 대통령이 돼 국민들이 안정을 찾고 나또한 만사형통해서 엄마랑 행복하게 살고 싶어요.
Good job like
Hola un saludo desde México una pregunta cómo se llama el material que utilizas para que el metal se aga negro gracias
Schöne Arbeit. Ich glaube aber das das Härten nicht funktioniert hat, weil die Klinge nicht heiß genug war. Die Farbe muss durchgehend hell orange sein.
Super trop bien j'emm super sympa bisous bisous
Does anyone know the purpose of the two missing circular wedges at the base of the blade/handle?
I wonder why a lot of restorers on UA-cam use Electrolysis instead of a vinegar bath to remove stubborn rust?
Really went the long way around on the handle didn't u
용접으로 구멍을 채우고 다시 갈아내서 깔끔하게 만들었으면 좋았을듯
Baking soda is a good electrolyte for electrolysis
Absolute bloody half job. Next time just leave it alone.
7:23 look closely at where the weld was such disappointment.
Filinf all those nodules down must have taken forever, sore arms afterwards to.
customization is the word you are looking for.
i had to turn my volume up because it was quiet but when i got in ad it was so loud i went deaf for a couple minutes
Now make the video in reverse, so Papa Nurgle can get his cleaver back
But... does it kill ?
Przepiękne pan ten tasak odrestaurował powiedz mi pan wczym pan chartuje stal bo bym chciał kupić taki środek do chartowania pozdrawiam 👍👍👍👍
JUST LIKE NEW NOW!!!
What were those big blobs of metal even doing there in the first place?
Muito bom!👏👏🇧🇷🇧🇷
Это не восстановление! Это халтура
What bit are you using for your dremel?
I wish there was talking as what is being done, Explainations
I think the wire holding the handle on originally was a mostly straightened coat hanger?
Не поняла, а зачем сварка на обеих сторонах лезвия ножа, каплевидная правда, но зачем? Тем более дуговая. И это явно не ржавчина и не диффузия какого-то металла в лезвие. Может там были каверны? И ещё закалка странная и отпуск не сделан, да и чернение явно не для бытового предмета (для мяса, приготовления блюд ну никак). А так - кропотливая и красивая работа.
Extremely interesting, I think you are the most creative man ! Your video is so fantastic !❤😊
fake rust.....you have the same rust on all your videos............do a real restoration..............one day !
What dremel bit is that ?
Amazing restoration on this old rusty Cleaver. I've never seen a Cleaver like this before. It's really beautiful. I love the handle that you made for it as well. It looks fabulous all put together. Thanks for sharing your video. I really enjoyed watching it. Looking forward to your next one.
Stay safe and healthy.
He didn't do a single thing correctly. And bluing isn't food safe at all. He ruined that knife.
The blade shape makes absolutely no sense. What possibly would this be used for? The bladestock too thick for a proper cleaver. I have been around food prep and butchering for a time. People don't make tools without purpose. I'm calling this a fake.
apparently, according to someone else who keeps spamming that they ruined it cause of the bluing and the bevel, it's an French Ice Cleaver
If there's any one question that hooks me it's this: If the restoration is meant for food, are any chemicals utilized in the process alone food safe?
It isn't meant for food, it is for slaying dragons.
That's what I call making the most of what you have.
i would have used that to cook with before cleaning. Awwwww man i was so happy with those bubbles on the side before you started filing them off!! they made that blade unique and special it looked so badass with them on it! you disappointed me when you STARTED filing them off! so sad
The handle sticks just with glue ?
Only thing that bugs me with this is that when he uses the brushes he just barley scraps it use some elbow grease and quit relying on your power tools to do it all for you
That is just too super fkn cool.! Hella good work. 😎🎩👍
I was interested in the use of electrolysis for the rust removal.
As was I, considering it doesn't work, nor is that electrolysis.
Super trabajo
Perfect handle size.. good job bro
👍!
Nice work 👍 turned out great
I've never seen a cleaver like that before. What would it have been used for ?.
It's a French ice cleaver. Not a meat cleaver. And he ruined it. Made it toxic with bluing agent.
Excellent work, good sir
this looks like someones unfinished project and was just left out to rust