The super high pressure reg 1100 and the flex regulator were actually made for air rifles / pellet guns that are rated for 1-3 thousand psi most people don't know that the flex was actually design by a air gun/ custom pellet gun builder named Travis Whitney this is why you can find the flex regulator the flex starting at 2000psi and there adjustable so you can change the pressure depending on the wight of the round being fired if changing ammo just a fyi for air gun guy that can only find info on paint ball and can't find a reg flex and shp reg are what you are looking for hope that helps some one 👌👍✌️🎯🛠️💯🤔😉
just bought a spyder amg, operating pressure of 450, the stock regulator on the marker isnt adjustable.. that being said. does it make sense to just adjust a tank regulator to 450 psi and throw a traditional asa on the grip frame and remove the bottomline non-adjustable kingman regulator? is there any benefit on a stack tube blow back marker to having a tank regulator and an additional regulator on the marker?
If I already have a SLP regulator on my tank can I use it with a empire mini GS I’m New to paintball I used to play airsoft but I have a SLP tank so I was wondering if I have to get a new regulator or a new tank to run a paintball gun
Just cause yall dont sell macdevs or had drama ya should let people know macdevs run on slp they can run with medium pressures to but 100psi operating pressure is pretty low and what macdevs do run at.
Ive just got an Axe pro. I have a SHP ninja reg that i was using on my tippmanns. Can i use the SHP set to 950 psi on the Axe Pro? wouldnt the ASA reg on the handle lower the pressure to 200 psi?
you can add inline reg if you want but any gun that allows you to use Co2 will work with SHP reg are for reactive triggers or guns that work good with Co2
Does the 4500 psi regulator have a smaller orifice since it’s under more psi to obtain, say 800 psi to the gun than a 3000 psi tank would or is the only difference the burst disks? Thanks
Hey my macro line fitting is leaking I have checked the o ring in the fittings it’s fine I can’t get the fittings off to replace them I can post a video if u would like to see what I am talking about
We will shoot a video tomorrow to help you out. They are actually very easy to repair and a common question we get in customer service. Sounds like it fits the bill for Rob!
Does the 4500 psi regulator have a smaller orifice since it’s under more psi to obtain, say 1100 psi to the gun than a 3000 psi tank would or is the only difference the burst disks? Thanks
BeanDip125 the reason I ask is since the 4500 has more psi more air is prone to escape due to the higher psi. I wanted to know if the compensated by making the inside smaller to regulate the higher internal psi.
So i have just purchased a empire mini gs and i already had some tippmann 48/3000 aluminum tanks on hand from my magfed, they all have stock regulators so i assume the out pressure is 800 psi. That being said will my tippmann tanks work with my mini gs or will i need a adjustable regulator or am i fine to just throw it on the gun and have fun
Aaaaaghh! Where is Uncle Rorys soothing voice?!? This is not working! How am I supposed to go back to sleep? (watches old Gtek unboxing vid) Much better....
I have a first generation bob long intimidator classic and it runs on 500psi according to the manual and I am wondering if I should use a SLP regulator or something else
I have just purchased a 48ci 3000 psi gi sports tank and I am wondering if I should get a bob long torpedo regulator to be safe so I don’t kill my solenoid or overpressurizemy orings
Shout to everyone with an Axe 2.0; the manual clearly says it is a *low pressure marker* that operates optimally at 350-450 psi. For the stock regulator on the Ninja UL 65/4500 model, you need to take out the two red shinms. There is a UA-cam video on how to do that.
Field one/bob long, angel, macdev, and dangerous power is what slp is for. I use SLP on all my high end markers and no problems at all
would it work on cs2?
aPeralz yes
Rumor has it Rory is lost in the back warehouse
Probably lost in the gun room...
A CS3 has a tank output pressure between 200-450… now wound it be better to use an SLP reg over a tank with all the shims removed at 450?
The super high pressure reg 1100 and the flex regulator were actually made for air rifles / pellet guns that are rated for 1-3 thousand psi most people don't know that the flex was actually design by a air gun/ custom pellet gun builder named Travis Whitney this is why you can find the flex regulator the flex starting at 2000psi and there adjustable so you can change the pressure depending on the wight of the round being fired if changing ammo just a fyi for air gun guy that can only find info on paint ball and can't find a reg flex and shp reg are what you are looking for hope that helps some one 👌👍✌️🎯🛠️💯🤔😉
Sorry Quick question that’s off topic but I always wondered, what happen to the old reviewer named DJ?
So informative.....Mahalo!!
just bought a spyder amg, operating pressure of 450, the stock regulator on the marker isnt adjustable.. that being said. does it make sense to just adjust a tank regulator to 450 psi and throw a traditional asa on the grip frame and remove the bottomline non-adjustable kingman regulator? is there any benefit on a stack tube blow back marker to having a tank regulator and an additional regulator on the marker?
You can use 450 psi with bl/field one and angels...
Thank you for explaining this! Truly helpful
Nicely explained, thanks
Thank you for explaining all the regulators. Can I charge my CO2 tank with compressed air to 1000 psi for my Tippman Cronus?
Excellently done, very informative.
If I already have a SLP regulator on my tank can I use it with a empire mini GS I’m New to paintball I used to play airsoft but I have a SLP tank so I was wondering if I have to get a new regulator or a new tank to run a paintball gun
I too would like to know this
Just cause yall dont sell macdevs or had drama ya should let people know macdevs run on slp they can run with medium pressures to but 100psi operating pressure is pretty low and what macdevs do run at.
Ive just got an Axe pro. I have a SHP ninja reg that i was using on my tippmanns. Can i use the SHP set to 950 psi on the Axe Pro? wouldnt the ASA reg on the handle lower the pressure to 200 psi?
you can add inline reg if you want but any gun that allows you to use Co2 will work with SHP reg are for reactive triggers or guns that work good with Co2
Does the 4500 psi regulator have a smaller orifice since it’s under more psi to obtain, say 800 psi to the gun than a 3000 psi tank would or is the only difference the burst disks? Thanks
Hey my macro line fitting is leaking I have checked the o ring in the fittings it’s fine I can’t get the fittings off to replace them I can post a video if u would like to see what I am talking about
We will shoot a video tomorrow to help you out. They are actually very easy to repair and a common question we get in customer service. Sounds like it fits the bill for Rob!
Thank you mine are so stuck
When are yo guys going to do this video
What's this? What's going on? Where's Rory?
I have a pair of old Tippmann Pro-Lites, and i was wondering, of these regulators what would be best to run the old gun?
Does the 4500 psi regulator have a smaller orifice since it’s under more psi to obtain, say 1100 psi to the gun than a 3000 psi tank would or is the only difference the burst disks? Thanks
PROJECT ANUBIS this would fit on any hpa tank, 3000 psi steel tanks or 4500 psi carbon tanks
BeanDip125 the reason I ask is since the 4500 has more psi more air is prone to escape due to the higher psi. I wanted to know if the compensated by making the inside smaller to regulate the higher internal psi.
PROJECT ANUBIS all regulators now a days are able to accommodate 4500 psi, the internal design is not smaller because of the increased pressure
So the shl would let you use the select fire with a remote line?
So i have just purchased a empire mini gs and i already had some tippmann 48/3000 aluminum tanks on hand from my magfed, they all have stock regulators so i assume the out pressure is 800 psi. That being said will my tippmann tanks work with my mini gs or will i need a adjustable regulator or am i fine to just throw it on the gun and have fun
Buying a shocker amp, should I get a slp reg?
What would be recommended for running a remote line to a T15 have seen people say T15 with a remote line has some issues.
you need output pressure of 950+
Aaaaaghh! Where is Uncle Rorys soothing voice?!?
This is not working!
How am I supposed to go back to sleep?
(watches old Gtek unboxing vid)
Much better....
I have a first generation bob long intimidator classic and it runs on 500psi according to the manual and I am wondering if I should use a SLP regulator or something else
I have just purchased a 48ci 3000 psi gi sports tank and I am wondering if I should get a bob long torpedo regulator to be safe so I don’t kill my solenoid or overpressurizemy orings
Whats the best for the 170r
Clone 5 slp or shp. How many chims?
We do not carry MacDev For marker specifics we recommend you reach out to them directly.
Shout to everyone with an Axe 2.0; the manual clearly says it is a *low pressure marker* that operates optimally at 350-450 psi.
For the stock regulator on the Ninja UL 65/4500 model, you need to take out the two red shinms. There is a UA-cam video on how to do that.
I’m new to paintball. Do I need a regulator in general? I have a Tippmann Stormer elite.
Jason Washington they come with your tank. These are uprgrades
Slp regs are also need for macdev guns
The Littlest astronaut ANS doesn’t sell them due to some drama that happened, so they aren’t gonna mention them.