Hyundai/Kia P1326 Diagnosis and Knock sensor replacement (flashing check engine light)
Вставка
- Опубліковано 13 тра 2024
- In this video I take you guys along with me as I diagnose a flashing check engine light on a 2017 Hyundai Sonata. For an explanation of this code watch this video:
• P1326 In Hyundai/Kia v...
Check out our amazon store!
www.amazon.com/shop/sesgarage
Check out some LED lighting from our channels sponsor!
lddy.no/140k8 - Авто та транспорт
Thank you for posting this. Would be awesome if all auto technicians are as honest and efficient as you.
Its nice to watch this man . he knows what the hell he;'s doing
As a matter of fact its TIME FOR A RAISE
That clearance tool is innovative and cool, amazing invention. Do they ever do an oil analysis to check for contamination?
I appreciate you showing what is involved in checking the clearances. Lots show the rest but not that bit. Good video.
Just started at Kia today and I did this for the first time it’s good to see a video like this to keep it fresh in the memory. Awesome content
Thanks for the video. What preventive measures can an Hyundai Owner do? Also, have the journal oil flow issue been corrected with the newer models. What weight oil do you recommend since there are 3 different weights listed in the Owners manual all are suitable for the NJ area?
This videos is the best explained so far great job how much does a job like this cost?
Man it would be super helpful if there was a mechanic or manager at my local dealership who gave a crap about doing warranty work. I've been having nothing but issues with this dealership for this same exact code being thrown and I'm going on two weeks now with no vehicle, no rental, and they have yet to look at the car. I appreciate your video and how helpful it was to at least somewhat understand what could possibly be the issue with my vehicle, but my local Hyundai's service team as well as service manager are all absolutely ridiculous.
bet the same thing is about to happen to me
I purchased a Optima. Did the recall for knock sensor to be added, eight days engine coded and had to be replaced. My vehicle was at dealership for almost 2 months due to backlog for engine problems. Engine was replaced, but 10 days later, engine lit on and car stopped. This time faulty sensor. Car ran for 10 days and while driving slowed to a complete stop. Had it towed to dealership (3 previous tows) to find out it needs a new transmission. I have continued to make car payments. No loaners. No car. PLEASE KNOW when they engines are upgraded, you will have to replace the transmission to work with the upgraded engine. So I am 2 months in waiting for a transmission. 4 months downtime with a car I have owned for 10 months.
My closest Hyundai dealership is an hour away. They won’t be able to get my car in to be looked at for a month and a half. That’s unacceptable. I’m pretty sure I’m having a knock sensor issue and not actually an engine issue itself. My abs lights came on and then a few hours later the engine light started blinking and my car went into limp mode. No knocking noises tho. I’m hoping that I can get my car driving condition tomorrow if it is just the knock sensor and then have complete diagnostics ran at the dealer in a month and half in case there’s something that becomes a catastrophic engine failure and needs replacements.. and that’s covered by all Hyundais who have the latest knock sensor installed which I’m thinking mine does because it’s a later 2015 Hyundai Sonata that I bought dec 31st 2018. No recalls are on my car for a new knock sensor. Hoping this isn’t going to cost me a ton bc I’m broke.
Wow this sucks seeing all this bad news. I have 2018 Santa Fe sport. Took to the dealer did the bearing test said they updated ecm and vehicles is running ok at the moment. Lol like wtf. 2 days later done it again. They basically told me they don’t know why it does i. SMH
Hey my friend you're a good mecanic i have the same problem in my Kia .
I want this guy workin on my cars.
Thank you!
Just got the p1326 code!!! Wish I could bring my car to you!! You know you stuff!!
Me too
He's just following a TSB... Not very difficult
Thank you for the video very helpful
Hey there. Great video and great info! My mother in law just had this issue on her 13 sorento. Also, at 2500 miles into the oil change, it was very low! Consuming oil is my guess. Kia did all tests and check bearing clearance and said all was good. My huge favor question to you is: What tolerances are considered acceptable and what's bad?? 0.003 good, and 0.005 bad? I am not sure. I dont know their tolerances and I'd like to know if she is on the cusp of bad things happening or not? Thanks a ton in advance!
Added note... now nervous after watching this and seeing your comments. Wife just bought a 21 sportage, and sister just bought a 22 sportage, both with the 2.4. Oh boy.....
Question if I can do it myself but don’t have the ability to reset it what do you recommend and why is it so important
I have seen other videos where the code on the vehicle was P1326 but their repair was to replace the intake runner motor which should have been code P200A for the runner. Do Kia and Hyundai have a problem with their computer system???
Great video, keep up the good work.
This video saved my life. Thank you seriously, I was going through it 😂
Very good information and explanation,8 months ago remplace a crankshaft,rods and piston on a 2.4l Hyundai with the same code after that remplace knock sensor and harness from sensor to pcm(I use sand paper to give more tolerance crankshaft main and rod bearing to avoid the original problem..
Excellent video. I'm not a Hyundai tech and this is beyond helpful to me. How often do rod bearing oil clearances open up on Hyundai's that they need a expensive special tool just to check them?
They have a class action against them currently.
These engines go out ALOT and are expensive bc its hard to find a good one. Im located in dallas tx and the engine was $3400 for one with 55k miles on it.
Hi I got the p1236 code for my 2019 Kia Sportage, 75k miles, would this be covered by my warranty, I recall Kia saying they covered 100k but not sure if they try to play hardball
Where did you buy that tool ? If it’s companies which tool is it
Is this on a 2.0L engine? If not, how much different would it be on a 2017 Kia Sorento 2.0L Turbo? Can't seem to find that specifically online. Just the 2.4, for some reason.
My 2018 Kia optima 2.4 the engine light would come on only when it rained or I took it to the car wash replaced the knock sensor myself and it turned out to be a knock sensor wire was split from the factory!!!! Also the crc intake and valve cleaner works awesome!!!
Is the GDI cleaning the same as a Carbon Cleaning? Also is it necessary for 2014 Sonata Limited 2.0T ??
Thats awesome thanks for this video
thanks! and glad it helped. Consider subscribing for more!
Dealership charged me for a knock sensor replacement and 300 miles later the engine started knocking. They crooked me. If they had checked the rod bearing clearances they would have known that the bearings were bad. They caused me to be stranded 200 milesfrom home. Still waiting for the Hyundai case manager to call. If the dealership doesn't make good on their failure, I'm going on social media to do as much damage as I can to their business.
How much did they run you for that knock sensor?
@@luis-n-ceci6998 $448.87 to replace it.
Report this to the NHTSA because they have open investigations on them and theres another class action lawsuit opened in South Carolina against Hyundai and their 2015 sonatas. Which are starting to have these same issues. I my engine is limping and I’m pretty sure it’s a knock sensor issue and not the engine it’s self. I’m getting a diagnostics run on it tomorrow and if it is the knock sensor I have to wait 1.5 months before Hyundai can even see me. Ridiculous.
@@Goldun-nah Hyundai replaced my engine. Also, the attorney general's office in my state collected my $400 plus dollars from the dealership that charged me for the knock sensor.
@@randallturner8048 if it isn’t too much to go into can you explain to me the process. I’m just trying to be preemptive and have a game plan for if they try and swindle me. Taking mine in Friday for the same thing. Glad you were able to get some resolve. The engine replacement been treating you good?
Bought my 2018 hyundai sonata at carmax back in the beginning of April 2021 with 41k miles on it... So now July 31 2021 my car has p1326 knock sensor issue.... Hyundai told me that my car is on recall list and I'm sure it's under warranty, so hopefully I get it in to them and don't have to pay for it. What do you guys think?
Wait so were you getting a knocking sound from the engine at all? Did you hear anything whileengine was running?
hey good vido. do you think if i replace the crankshaft and piston will eliminate the oil consumption on my 2018 kia optima 2.4l? thanks
Hello, is there any other way to reset adaptive values without forking out over 300 bucks for a adequate scanner?
Great job brother
Thanks
My pleasure! Please Subscribe for more!
Sure
A few days ago i went to get an oil change and my car went into limp mode on the highway this morning. I checked the oil and it was overfilled and now it’s at the dealership getting looked at smh my question is could this happen from my oil being overfilled? It’s the only thing I could think of and the enigine has less then 50k Km
What’s the app you used to read codes?
How much does this cost around to get this fixed? My car just started doing this. Please respond thank you so much
I'm wanting to purchase this entire tool the Sylvac with the probe setup can tell me any other information on this specific tool setup or a tool number of some sort thanks
My son’s 2014 Sonata has the same code. How much was the repair on this? I saw Hyundai reprogrammed the computers in these cars as part of a recall, make the knock sensors overly responsive. Even using a non original oil filter can set them off. He just got an oil change.
Where could I find that rod bearing clearance tool. I have searched for it but havent had any luck. Thanks.
Thank you for sharing this clear and to the point explanation of this code and test!
We have a 2017 Santa Fe 2.4L that was just towed and sitting at the dealership waiting for this check Monday morning. I did a quick check with my code reader and it’s got the P1326 after flashing the CEL and going into limp mode a short distance before getting home. Nice to know what they should be doing.
Question - to engines that fail the clearance test, are they always making noise or does this pickup the issue before they die?
Take care!
This video is awesome. Thank you
Are there a few different knock sensors?
we’re you losing gas and having problems accelerating w a blinking engine light ? I have a 2016 Kia Sorento 107,000 miles car drives but have parked because engine light blinking and gas has been getting eaten
Knock noise is very low but you can hear it but not when drive kindve goes away getting towed in morning
What do you think?
Please the name of the spanner you use to turn the engine
Hey I was going to try this can I reset the Adaptive values with the mx808 scanner
Great stuff.
I have a 2014 Kia optima 2.0T and I got this code two days ago I’m hesitant on if I should change the sensor myself I’m the second owner of the car and I don’t know if this already happened to the first owner and if he already took it to the dealer to get dealt with
Great video. I have knocking sensor error on my Hyundai Elantra and I cannot drive it more than 30km before the code comes back. The bearing test is passing but I have a knocking noise coming from the engine and Hyundai don’t consider my car having issues even after sharing with them a video where they can hear the noise and the VIN of the car. Any advice ?
Tell them to diagnose and fix it.
After they fix it have them drive it 30 miles to prove its fixed before you pay them.
Got a question for you, our 2013 Kia Optima with the 2.4 got the SC147 recall done back in 2018 however I'm 95 percent sure the engine is blown on it. Is there anything that can be done since the recall was already complete? Kinda sucks that the recall was done and shortly after the engines decides to quit with 120k on it.
they changed the recall for SC147 instead its 15 years with unlimited miles....take it back to Kia if it's still running
@@chrisc1623 we ended up fixing the issue. It ended up being a crank sensor.
question is their another way to reset learn adpater values with out a hyundai scanner
Great video. Subbed. Is there any validation that tje GDI valve treatment has any benefit ?
If done early enough in the engines life and in regular intervals they absolutely help keep the carbon at bay! Once the carbon has set in there’s not much that will clean them minus removing the intake manifold and walnut blasting/scrubbing the valves and ports!
How many miles did this to pick this car? Had to get a knock sensor?
I'm getting a pinging noise on an Accent 2013 16L when going uphill - I think the knock sensor CEL came on once, but it was reset and it did not return. But I still get the pinging noise / spark knock. What is best course of action?
So you have one of two issues. First off, make sure you’re using top tier fuels. If they are subpar fuel and less resistant to knock this will happen. Second. Have you ever done an induction service on the car? Carbon backup on the back of the intake valves, and top of pistons is common on these GDI engines and should be done every 15-20k miles. Check my video on induction services out
ua-cam.com/video/TLVAYKDanyw/v-deo.html
Same problem I have thnx for video
Happy to help
How was that tool measuring main bearing clearance? The way I’ve been taught the only way to measure main bearing clearance is by using a mic and a bore gauge or with plastigauge. Or is that like a compression tester?
Air pushes the piston down, then air sucks the piston up. The up and down of the piston will show clearances of both the piston wrist pin AND the main bearings all at once. Apparently, the wrist pins never develop play so whatever measurement you get, if its outa spec its always the mains on that engine..
Theretically you can do this test without the tool, but you would need to find a way to setup a dial indicator in a way that it cant move. Pull the piston down by rotating the crank and stop halfway. Then setup the dial and feeler and then manually push the piston top downward without disrupting the dial setup.
@@ripptydevibes2581 that’s really cool actually thanks for the info!
I just changed my knock sensor on my 14 sonata 2.0 turbo, but the engine light still blinks, do I need to have the dealership reset it??
How do you reset the adaptive values if you're replacing the knock sensor at home? If I clear the codes and possibly disconnect and reconnect the battery after install would it work?
You can try a capacitive discharge. Disconnect both battery cables and touch them together for several minutes
Did putting the two cables together work
Was there any follow if the concern ever came back?
I need a video for placing a knock Sensor for a 2014 Kia Rio LX 1.6ltr engine.
this came up as soon as we drove 2013 sonata in snow with chains on. Checked with a mechanic who was able to reset it, does this require further action? P1326
that may have just been a hickup from the chains hitting the fender well and the knock sensor picking up the noise
If you hear an actual knock/misfire would you suggest to replace all coils, plugs and knock sensors?
No, have the car properly diagnosed
Question… I had the bearing clearance test done and they said they needed to add oil to do the test as the air was going around the cylinder due to a bad ring. Would this be considered a failed bearing test? Thanks
No, it would not. They only check for rod bearing clearance
What would you recommend for me to do. 100k 2016 Optima and got the error code and went into low power mode. Got towed and the reset and reprogrammed WVU for knock sensor
Reprogrammed ECU
New friend here. Liked the video, i have 2017 tucson. Looking forward to watch all your vids soon. Stay safe.
i have the same car as you. this just happened to me. dealership cant see my vehicle until december. it ran a p1326 code. there is currently a class action lawsuit to hyundai and this. its also under recall so id assume my dealership will honor to fix or engine replacement.
What happens if the rod bearings are ok and the knock sensor has already been installed?
They replace the faulty knock sensor.
12 DCT Veloster went into Limp mode w/ flashing CEL. Dealer said it passed bearing test and they replaced the nock sensor. It went into limp mode again after about 30 miles. They suggested a combustion chamber cleaning. Limp again on 20 mile mechanic test drive. Now they suggest replacing the front wiring harness at $7500. This sounds like they have no idea. Where do I go from here? 143000mi
How often is it the knock sensor being bad or the engine needing replacement?
I bought a sonata 2.4l 2018 in April this year I didn't know a about the recall, or the claim settlement against hyundai American motors it closed in July this year but my vin is included in the settlement pretty sure dealer who sold it to me knew about it should I complain to consumer protection or am I wasting my time should sell the car ? I own it already its at the dealer getting diagnosed for knock sensor
Update
@@n__167 after 5 weeks of my car sitting at dealership their "certified technician" aren't certified to inspect or diagnose the cause of the issue even screw on battery terminals properly when i told em basically they tried to scam me for a bran new battery and when they did their diagnosis they figured my smart junction box aka fuse box was shorted and told me had nothing to do with my knock sensor issue nor was it related... basically they changed the whole engine block bran new, new knock sensor wiring, they had mentioned my rear heat seats werent functional and they crooked my seat upon removal so one side has a gap manager told me nothing he could do about it.. which is disappointing they damaged my seat and honestly it doesnt matter long story short 800$ for fuse box, free engine from hyundai canada no issues since they swapped the block drives like new, best purchase ive ever made Car drives smooth, very spacious, very fuel efficient.
Would having no oil in the engine cause this code to pop up
What scanner tablet do you have
What brand scanner is this, thanks
Can you update the knock sensor if the engine doesn’t turn over or can you replace a knock sensor with a new one with the new update already installed on it? Or is there a way to somehow get the update by other means like extending the wire on the knock sensor and putting it into another car so the computer thinks that it was updated.
Did u figure this out?
I just popped a new knock sensor on a 2018 . Not much difference yet
@MayKen Replacing it wont do much, it needs the update from dealership. Only way to get the lifetime warranty. Even with the update it probably wont help.
Hey i have the 2017 sonata limited. can i reset those values myself with a regular diagnostic tool? Or do i have to have a mechanic fix it?
If your scanner is a two way scanner it should work. You need to be able to communicate with the ECM and select reset adaptive values
@@SEsGarage ok, thank you for the quick response.
I have exactly the same problem ( code) , I just drop off my car in the dealership but how much cost?
Just dropped my 2016 Optima off at the dealership for this same error. Good to understand what’s going on with it. Thanks for the video!
This just started on my 2016 optima over the weekend... how long did it take for you to get yours back?
I had mine back the next day. All they did was check the bearings for wear and do a software update. No engine damage so far.
@@Kris81999 Thanks! That’s good to hear, I’m hoping to hear the same for mine as well.
Same here!
@@Kris81999 did you have to pay or was it covered? Having the same issue right now on my 2015 sx turbo
I just got a P1326 code with a flashing Check Engine light on a 2016 Santa Fe 2.0. But the only symptom is that the car doesn't accelerate past 35 mph, no knocking, etc. I read the TSB (Tech Service Bulletin) and it says that the issue is the Knock Sensor Harness...If that's the case, I can just swap harnesses...or should the dealer do this?
Whats was the issue? Im currently having the same problem
S&E,you are a great mechanic.I have a very well kept 2017 Sonata limited with the 2.4 engine with 65k miles on it.Runs great and I maintain it myself with Amsoil everything in from the oil,trans fluid,brake fluid and coolant. Still has the original front brakes and all four original tires although they will be changed to a set of Continental Extreme Contact DWS 06 Plus tires sitting in my garage.
Question.I have not had the 953 software done. Do I really need to get that done?
You should
Will the KS code remain in the history after its been cleared?
Where did you get that bearing clearance tool from?
It’s a Hyundai special service tool
@@SEsGarage So just curious if it does need a motor like in this case, would that be covered by the 10 year 100,000 mile power train warranty?
mine done this last night with 68,000 miles.....i havent called the dealer yet but i hope its something this simple to fix and they dont blame me for something :( it done it all of a sudden while driving home from work.
My car Tucson 2019 passed the bearing clearance test. The knock sensor has been replaced, ECM software up to date and yet it still goes into limp mode. They have done a reset of adaptive values twice now but it comes back after 50km plus of driving ... What's the next step please?
Going to have to let the dealer do what they need to do
@@SEsGarage Well they cleared the ECM code again and it came back after 400km of driving. The end result is a complete engine change under warranty taking X number of weeks not guaranteed due to ordering the parts first before fixing. I traded it in and got redesigned 2023 model instead.
I'm having the same exact problem BCT passed, ECM update performed and still randomly comes on. Dealer keeps pushing me away and saying its not under warranty.
I have a '14 kia optima. I just got this code couple days ago. Is it safe to drive it to the dealership? Or any auti shop.
they go into limp mode for you to be able to safely drive to the dealer. However, if you hear any abnormal engine noises id advise against driving
Is this the same as the 2.0
also caused by water at the sensor harness (let dry few days) or false KSDS alert - make sure Hyundai put the latest KSDS software variant, there were several improved versions of the software.
Thank you
You're welcome! Please consider subscribing for more!
Seems like Hyundai found a way to screw people with this update by making it a requirement to be able to be eligible for the limited lifetime warranty. These dumb judges and lawyers fell for it. All the update does is make the knock sensor more sensitive to try and save an engine that has already started to fail by putting it into limp mode.
This should of never been a campaign but a recall on all engines for safety reasons. They also lied in the owners manual by stating they recommend oil changes at 7,500 miles for normal use and 5,000 miles for more heavy use but all these engines are burning a quart of oil every 500-1,000 miles leaving the car bone dry by the next oil change.
Rod bearings are failing because of the way the engine was engineered. It is a faulty engine that is bound to fail no matter what a consumer does to try and prevent it. These am engines were built to fail by design.
I only get this problem when it snows, rains or if I drive through a car wash. Have you heard anything like this before?
I went to the dealership and. I’m told I already have the software update.
Please advice
The code shows up on my car when it rains.
I don't know why?
@@jeffccook I no longer have this car. But I went to a different dealership and they fixed it for free.
What is that rod clearing tool called? My kia optima 2013 eats my oil every 2 months. I am constantly havinf to refuel it. I took it to the kia dealer and was told i need to pay $850.
I have a 2014 well maintained with 2.4 almost 50,000 miles and have the code back for a second time (the last at 25,000 the dealer said if was the wire harness and replaced it. Now the scanner says “glow relay short circuit.”
Is there an update on your repair ?
I have a 2014 Optima and developed this issue. What is an estimate to repair?
At least $3,000 or more..
I agree with you they the dealership did it to me ,too on my 2016 veloster . I bought it new from WORLD Hyundai dealership in Matteson,Illinois.They lies about the real problem with the car to avoid honoring the warranty.(Louis Burks)😮
Check out those temples.... that's a fresh fade homie. Oh thanks for the video too
my fiancé is a barber lmao. she always keeps me looking fresh
My 2022 Hyundai Kona N has P1326 code active. Is the Knock Sensor on the 2.0T engine visible upon opening the hood?
No, it’s up under the intake manifold
My daughter just bought a 2012 Optima and the light went on and went in to limp mode. I live about 35 miles outside of Reno she bought the car through Carmax and she has a 90 day warranty on the drivetrain. We’re in a small town with just a few garage but there is a GMC dealership in town. I just wonder if I should take it to the dealership to make sure all proper steps are followed even though it’s not a Kia dealership. I did do a scan a code and it is a P1326 code that came up
Don’t even bother taking the car to Carmax. Take the car right to a KIA dealership
Drive it in limp mode 40 miles?
I checked the recall log and it says no active recall if there is one it’s been satisfied. 75 thousand miles.
@@jimrobb1783 The problem is there's no such thing as an recall for this issue....it's considered a TSB...so what I would do is tow it to Kia and as long it's still in limp mode tow it there then have them diagnose it and solve it...regardless...same thing happen to my sister's hyundai sonata got it towed there then they replaced the engine cause it failed the sound test they do for engine knock....
My check engine light started blinking on Saturday I have a 2011 Kia Optima… did a test on it with same code … dealerships said it would be up to 2 weeks before they can look at it !! It turns on but has a terrible knocking sound!!!!
@Amanda Lovee yea I had to get the whole engine replaced! As long as you had the knock and sensor updated theyll replace it for free
Thankfully we have a 2020 Tucson with the 2.0 I hope this is a good one. It gets the oil and filter changed by me every 3K.
The 2.0 Nu has a separate set of issues, I feel like right now Hyundai doesn’t have a single reliable four cylinder engine on the market. Their V6’s are rather solid
@@SEsGarage can you enlighten me on any ? Vehicle has just over 10 K and has had OC every 3K any info would be great . Thanks for all you do, its appreciated.
Keep all receipts
How much does that service cost. Because I have a 2015 Hyundai Sonata 2.0t and it’s is pulling p1326 and p0014 codes
Get that thing to the dealer. P0014 is a low oil pressure code
I don't have that software you are using to reset adaptive values. If I change the knock sensor and don't reset values then what ? Is reset adaptive values mandatory ?
I know when the TSB they specifically tell you to reset adaptives, and I’ve never not reset them, so I’m really not sure what would happen if you didn’t if I’m completely honest
I have a 2014 Santa Fe Sport with 2.4L that this happens to when ever it rains. I brought to my local Hyundai dealer and they said they ensured the engine is not knocking and cleared the code. They said other than that there is no fix for the problem and because I'm second owner of the car that it wasn't covered under extended warranty for this issue. Of course it rained two days later and it happened again. It has happened every time it rained the last two months. Does their diagnostic make and sense to you? I reached out to Hyundai Care and they told me to bring it to a dealership (which I had said I did). Any help would be greatly appreciated.
Same thing is happening with me. I'm the second owner of the exact same car you have. Do I have to go to the dealer or will the car run better after a few days? This happened yesterday.
@@camsav86 Find out if your car is included in a recall by Hyundai/ Kia regarding the knock sensor. Even if you are a second owner, Hyundai dealers should take care of it at no cost. Google Hyundai Knock Sensor Recall. There is a website set up for this campaign and run your VIN.
Find out if your car is included in a recall by Hyundai/ Kia regarding the knock sensor. Even if you are a second owner, Hyundai dealers should take care of it at no cost. Google Hyundai Knock Sensor Recall. There is a website set up for this campaign and run your VIN.
Update: The check engine light finally came on and could not be shut off. Hyundai Dealer ended up replacing the knock sensor at no charge and the issue is fixed. Thank you for the video.
EVERYTIME IT RAINS MY SONATA DOES THE SAME THING🤦🏽♂️🤦🏽♂️🤦🏽♂️
How much did this service approximately cost the customer? Did you ever see the price of something like this service done with the part included
was this car making any actual knocking sounds before you worked on it or just the light came on
Just the light no abnormal engine noises
@@SEsGarage bro I watched the other video where your sitting at your desk talking about the theta 2 motors and 1 sentence you said was if the rod bearing fails the will replace the motor free.. I had the sonata 2.0 towed to the dealer and it got approved for a new motor .. *also this was the recall motor so it's the 3rd motor in the car ... 1st went 50k ran fine but recalled ..2nd went 150k then last week blew.. and the new one will be ready by Tuesday ..you saved me 10k .. Thank you!!
We picked up a 2015 Sorento today and it's throwing this same code. No abnormal noises that we can hear.
Test drove the car yesterday with no problems and zero codes, not even pending. All monitors were set too. After about 7 minutes of driving it today and it does this. We hope it's nothing major.
I purposely didn't get the update for the 953 campaign because i heard about all the false positives customers were getting. My 2015 sonata SE has been fine (knock on wood). Am i setting myself up for a fight with the dealer if l end up having engine issues down the road related to this knock sensor thing mot having done software update?
if you dont get the update hyundai can deny your engine claim according to the new class action suit. All the early issues related to the 953 have all but been ironed out
How many miles you got?
@@frankieb7405 66,200