24 year old RACING LAWN MOWER build. Part 4.

Поділитися
Вставка
  • Опубліковано 26 чер 2024
  • Getting the front axel welded in 🤘

КОМЕНТАРІ • 3

  • @Failure_Is_An_Option
    @Failure_Is_An_Option 20 днів тому

    Flux core wire? Something isn't quite right. Almost wonder if the tip needs replacement. There are moments the arc completely stops

  • @Failure_Is_An_Option
    @Failure_Is_An_Option 20 днів тому

    16:34 You can toally get it sorted on your own. While I can't see your welds I can hear it. If your contact tip is new, try bumping your wire feed rate. Sounds like it is loosing contact so I'm wondering if the wire is burning back on you. One adjustment at a time. Besides it's all steel. No limit to the number of times you can cut, weld, grind. Just a matter of time, money, and GAS (give a shit). Run until you exhaust one of the three.

    • @dirtbagadventures1
      @dirtbagadventures1  20 днів тому

      Good call based on what you can hear! I did replace the tip, but I had the welder set up all wrong. Wire speed, and heat were off terribly even after trying to follow the guide on the welder for correct setup.
      After my friend brought his welder I got to watch him setup everything up, and even got up close while he was welding to watch how he was laying a bead.
      Thanks for the help! 🤘🤘