How to Install a Single Under Sink Water Filter
Вставка
- Опубліковано 20 сер 2024
- Hi and welcome to our video on How to Install a Single Under Sink Water Filter. To learn more, please click the link below
www.mywaterfil...
www.mywaterfil...
www.mywaterfil...
Hi and welcome to our video on How to Install a Single Under Sink Water Filter. To learn more, please click the link above
If you have any questions or if we can help you with anything, please contact us on 1800 769 300 or jump over onto our live chat on MyWaterFilter.com.au
Transcription:
Good day, folks. Rod from My Water Filter here today, and what we're gonna do is the installation of a water filter. Under sink installation, and you'll see we've taken the cupboard doors off today. That's basically so you can get a good view of what's going on in here, and it just makes it a lot easier for me to get in and do the installation. So, pretty simple process. Obviously, there's three stages to installing the water filter. We're going to install the under sink kit, we'll install the faucet, we'll install the water filter itself. So what we're gonna do here and what you wanna do is get everything out of your cupboard, make sure that it's safe and there's no electrical components and you're not gonna get hurt or injured in any way.
Then you're gonna get in here and have a look, and make sure you've got plenty of room to install the water filter, something to screw on to, 'cause you'll have a couple of screws that will go through the top of the housing to hold the filter in place. So, what we'll do here first, the first thing you're gonna wanna do is cut the water, turn the water off. So, pretty easy in this situation here. We've actually got a tap under the sink, so we're gonna turn the water off here. If you can't turn the water off here, you've gotta go out the front of the home to the water meter and turn it off at the main water supply. Then you'll have no pressure pushing on the house.
Then you come back inside, turn on the tap. I would expect a little bit of water to come out, there'd be a bit of pressure, releasing the pressure and we're all good to go now. So what we would do now is sort of just gonna lay a towel in under the sink here if you think you're gonna have a bit of spillage of water. But apart from that, we're going to undo the chrome flexible hose, and this is the part we're gonna install, which is the T-piece and that will send the water filter to your filter. So, simple, normal, half inch BSP connections. The T-pieces can come in different shapes and sizes. But they're all a T-piece. So we'll just nip in here and undo this chrome flexible hose first. Okay. All right.
As you can see, there is gonna be some water so we've left it here for you to see this here today. So I'd definitely put a towel down when you are going to install your T-piece. There's a rubber in the end. The rubber must be inside to have a good seal, okay? The chrome flexible pipe has also got a rubber inside there as well, and it'll male up on the male end. So we'll put the female on first. And what we wanna do, we're gonna mount the water filter over here in this nice, clear spot. So when we finish mounting the T-piece, we want the water hose to the filter heading in that direction , just so we've got a nice, easy flow for the water. So we'll just simply screw this one on here now. Okay. Like so. Good Australian crescent. Not too tight, you've got rubbers in there, they will seal. Beautiful, okay. Now we'll get our original chrome flexible pipe, and we're gonna screw him back on to the top of the T-piece. Once again, we'll just tighten him up if you're not tight. Okay, it'll do us. Okay, and there we are, the T-piece is now installed. I'll turn the tap off for the T-piece so it's off. And at this point of time, I could actually turn the water back on. So the water's coming back on the sink. And this line is now completely live, full of pressure, full of water, ready to go. And not that I will, but if I lifted up that little black lever on the T-piece, water will start coming out the end here. That's basically where we're at from there.
Then we'll get some hose that we're gonna use, cut it to the required length. Just give ourselves plenty of spare there today. We like to use the nice cutter or a very sharp stanley knife. You wanna have a nice, square cut on the pipe so you get the best seal inside the T-piece. And then this hose is just gonna push in about one and a 1/2 centimeters straight in to the T-piece. There we go. Make sure he's in there nice and tight.
To view the Full Transcription Click Here:
www.mywaterfil...