Ridge Fast Installation Demonstration Video
Вставка
- Опубліковано 7 чер 2017
- A brief guide showing how quick and easy it is to install Marley Eternit's ridge fast kits, which are suitable for use with all Marley Eternit tiles and slates as well as those of other manufacturers.
To see our full range of products and services, visit our website: www.nbp.co.uk/
Social Media
Facebook: / nbplimited
Twitter: / nbpltd
Instagram: / nbpltd
LinkedIn: / northern-building-plas... - Навчання та стиль
Would this ridge vent roll be suitable for an old style roof with a ridgeboard. If so would there be any difference in installing
Theoretically, you should be able to install a ridge roll on an old roof, but you would be best consulting a roofer first
@@nbpltd ye I just had a new roof noticed something was wrong from the start I couldn't see any gap at all in the felt. They said they cut a 5mm slot. But I looked at the Marley plans they are for a truss roof with no ridgeboard. Our ridgeboard is 20mm thick so it's wider than the gap they cut. Obviously they should if cut either side of the ridgeboard or no air can get out but I'm 2 months after I told them what was wrong now I've got a serious amount of condensation and all my rafters are mouldy. Rot will happen. And they did the same to 100s of roofs in my street.
he strangled that hammer good and proper.