Це відео не доступне.
Перепрошуємо.
GE Front Load Washer Stops Mid Cycle and Won't Spin - Common Issues
Вставка
- Опубліковано 16 сер 2024
- If you have a newer GE front load washing machine, one of the most-common problems is having a unit that does not spin up properly and ends up failing to wash your clothes.
In this video, I show you how to access error codes, and how to test to identify and replace the inverter (PN #WH22X35837) as well as other key components that may be at fault.
GE Washer inverter board (OEM): bens-appliance...
GE Door Lock (OEM): www.ifixit.com...
GE Drain Pump for Front-Load Washers: bens-appliance...
GE Accelerometer: www.ifixit.com...
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/Bens...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.
Thankyou so much sir. I had a ge washer with the 5 second spin during testing and after watching your video I ordered an inverter board. Problem fixed. Your video made it super easy to remove the front panel of the washer and swap the board. I ended up using a woodworking trigger clamp with a reversed jaw to stretch the gasket spring enough to re-install (with zip ties like you mentioned). Great video.
You posted this just at the right time. Currently dealing with issues with my GE front-load washer right now and this is saving me a lot of time and money. Already had a handyman come out and replace the drain filter but turns out that wasn’t the issue. With your video I’m troubleshooting the issues and accessing the error codes myself rather than paying someone else to come out just to tell me the inverter motor is fried and I need to replace the entire washer, which unfortunately seems to be the case. Thanks!
Overly complicated procedure! Just get a Miele! They will run 20 years with no problems!
Dude, that was a fantastic and very thorough video on how to fix this style of washer! I think it is funny because you state on your channel that you are not mechanically inclined. Hell, you could have fooled me!
Good luck with your UA-cam Channel and your business.
Thank you Ben! Followed your trouble shooting and found the problem. Got a new inverter board and solved the problem!
Good video Ben and great to see how to access Error Codes !!
I watch all these repair videos even though I don’t own any of them or plan to
Great video. Thank you for sharing
Please consider a video on window air conditioners. What are good models. The ones sold at Home Depot, Lowe's and Walmart seem to be disposables.
I have a 98' 7800 Btu Panasonic window AC, and a Kenmore 8000 Btu that was purchased about six years ago when the stores were closing.
The Panasonic is much heavier, quieter and blows the doors off the Kenmore.
I really do not like GE appliances. I worked at GE Aviation and saw first hand how GE cheap out on producing parts. I also had a old 1993, I seem to recall, GE top loading washing machine which was pretty good which lasted over 20 years & used a cider block for a counter balance. I now have a LG front loader washer & dryer. I am not impressed with these. I have to set the washing machine spin cycle to medium so it does not come up with a uneven load error. When I have to start replacing all of the appliances, I will get a Samsung all in one washer/dryer since I seem to remember you gave the Samsung unit better review then the GE & LG units. Please correct me if I am wrong.
LG is definitely the more reliable and better performing washer dryer set of the three. The uneven load error isn’t due to spin speed, it’s due to what you put inside it. If you put singular or small loads of heavy items it will easily go off balance.
I had a Samsung washer and dryer Combo. Lasted 3-4years.
They're both trash
Don't I am a tech and those things are crap
Hey Ben Thank you for your videos I have the same machine I'm getting error codes that keeps popping up 18,38,34,91,89 any suggestions that can cause this errors
i dont see that spring spreader tool in links....i want it
I want to buy it as well :-)
Hey Ben could you do a video on how to replace the door gasket on a ge all in one washer dreyer combo ? The pretty blue door gasket. Thank you
Ben! I have the wifi capable version of this wacher with the "tide" auto dispenser.
I've used Tide's washing machine cleaner with oxi a couple times now, but I'm curious if it's overkill. One packet caused the entire machine to fill with suds. After the painfully long (nearly a whole day) self clean cycle, there were still cleaner detergent particles in the drum. The instructions state not to use it with clothes so I ran some empty wash cycles to purge it. I then experimented by using about half of the pack and it only caused 1/3 -1/2 of the drum to fill...but no detergent remained that time.
Serious question: Is the totally full drum necessary for self clean?
I finally found your channel again. I thought I was subscribed but I wasn’t but I am now.
Hopefully you can answer this question and if you have a video with this topic link me to it. If you had a choice between Electrolux front loads and Maytag which one would you buy?
Thanks
With out adult right now I would go with electrolux
@@bensappliancesandjunk thanks
@@bensappliancesandjunk Thanks again.
So I think I narrowed it down to LG or Electrolux.
Do you have a no bells and whistles LG front load that yourself you would recommend but maybe they all come with bells and whistles now.
do the heat pump dryer video you talk about lg/ speed queen
I have this washer in the 850ss #
My question is, is it the board if it turns on and then shuts off in the middle Attempting to run diagnostic mode?
Error codes
66 ,40,92,33,39,32,8
I hear machinations inside the machine BUT No Spin
Loose or broken belt?
Hey Ben, I just got the SQ TC5, I heard from someone else who has the same SQ that the computer board failed 2 times in the first 8 months of ownership, and that they wash some loads on hot, and the SQ is kept inside a laundry room. After my 2nd load on just warm with the laundry room fan on, I noticed it was a little humid in my laundry room. I'm thinking the natural humidity that the SQ gives off is destroying the computer boards quickly. Is this a problem, or is there something else I'm not understanding?
My washing machine (Model Number GFW850SSN0WW) won't spin more than 5-7 seconds even during the spin and accelerated spin tests. I know my damper was bad and I just changed that. Is it possible it is the inverter board or the accelerometer? How would I know if it is one or the other before ordering the right part?
Inverter board 99% of the time with that explanation of failure. Very rarely accelerometer, and you should see inverter board codes vs. accellerometer codes.
@@bensappliancesandjunk Replaced the board and it seems like it is working. Ran the rinse and spin and it completed the whole cycle. Going to start washing everything now, LOL. Thank you for the video and your advice.
@@tubbywonder glad to hear this fixed it for you!
A Haier in a dress!
turns off after a matter of seconds and you hear a clicking sound. No error codes. just keeps clicking. Sounds like a relay click not the door lock click.
I just put the video out for that about 3 weeks prior to this one
Wish I watched this before I changed the inverter board. The inverter board was not the culprit
@@MrImperial67 it sucks - thats why I made the videos and released them as fast as I could, with the one about the main board being first.
@@bensappliancesandjunk thanks man I'm just starting out in appliance repair and you were more helpful than ge and my training school
I’m a tech. This appliance is shit. Do not buy!
This is a complicated useless video
Its helped a lot of people so far, and the solutions offered are known to work. We've used this solution to fix multiple GEs, and I know that this is the standard series of tests to confirm / replace the inverter if its bad. I am sorry if you had issues with the video, but I was asked to do this after hundreds of people having bad units from other videos I did.