Oil boiler commissioning and set up

Day in the life of a plumber
In todays video I go back to a job where I fitted the oil boiler to commission the appliance. I connect the oil line and flue, pair the watchman, bleed the oil line and set up the boiler
As always, thanks so much for watching, all the support is so greatly appreciated
#plumber #plumbing #apprentice #dayinthelife #boiler #oil #worcester

[@HeatingGeek]

Great explanation of the watchman. I already watched this but had to come back to comment. Thanks Tom. 👍

[@PlumbLikeTom]

Thanks for the support as always Ollie, it is greatly appreciated

[@johnwaby4321]

A nice training day for Harry 👍👍.he needs to know the correct way to do the commission so he is ready 👍

[@PlumbLikeTom]

Thanks for the support as always John

[@chrisholt2474]

Hi Tom, another great film thank you, plenty good learning there for Harry and me also for that matter.
I enjoyed this one and picked up some great information and I always enjoy learning.
Another nice installation as always, have a great weekend and take care. 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always Chris, hope you have a great weekend 👍

[@glynstorer3269]

I’m glad you know what you are doing Tom❤

[@PlumbLikeTom]

Thanks for the support as always Glyn

[@pauladventure]

nice , the EOGB Saffire modulates! 👍

[@PlumbLikeTom]

Thanks for the support as always Paul 👍

[@MartySwallowEducation]

👍

[@PlumbLikeTom]

Thanks for the support as always mate

[@thepm3972]

You like fone jacker with that hat...very entertaining though bud.thanks

[@PlumbLikeTom]

Thanks for the support mate, have a great weekend mate

[@peterdawson5115]

Nice to see that one up and running Tom, tidy as always. Take care 👍🚽

[@PlumbLikeTom]

Thanks for the support as always Peter, hope you have a great weekend

[@keithbrueton]

Thanks Tom a very Interesting video on the Oil side

[@PlumbLikeTom]

Thanks for the support as always Keith, hope you have a great weekend 👍

[@andyfadian]

Great video Tom, hope have a wonderful weekend 🙏👍

[@PlumbLikeTom]

Thanks for the support as always Andy, hope you have a great weekend

[@SteveHit1]

An interesting video Tom. Thanks!

[@PlumbLikeTom]

Thanks for the support as always Steve

[@d4dek130]

Another very informative and interesting one Tom .

[@PlumbLikeTom]

Thanks for watching mate

[@markdenney3333]

I use a pipe slice on 10mm Copper then ream out with a pozi screwdriver to allow for inserts. PTFE over the olive, then Heldite works for me too.

[@PlumbLikeTom]

I will try it that way, thanks for watching as always Mark

[@ianfarnworth7828]

Happy new hat Tom , keep up the good work and keep well to you and yours 👍

[@PlumbLikeTom]

Thanks for the support as always Ian, the hat was a one off as it was freezing that day

[@heatpump8566]

Great stuff as always Tom. For someone starting out in oil, that vid would be brilliant

[@PlumbLikeTom]

Thanks for the support as always mate, hope you have a great weekend

[@pb9926]

Great job Tom 👍😎

[@PlumbLikeTom]

Thanks for the support as always Pb, hope you have a great weekend

[@martinwright7093]

Nice one, Tom. Worcester need to design a clip to hold the exp vessel in place when it’s swung back, it’s irritating when it keeps trying to swing back and get in the way.

[@PlumbLikeTom]

It is annoying, at least it's easy to get to though and not at the back, thanks for watching as always mate 👍

[@hurley199]

There’s a little magnet on the underside of the board and it can stick to the bracket on the vessel to the case

[@PlumbLikeTom]

I did not know that, thanks for watching mate

[@Grasscutplus]

Nice vid mate! Hope you’re well!

[@PlumbLikeTom]

Thanks for the support as always Brad, 👍

[@TomChapman-wv9iq]

Epic hat Tom lol

[@PlumbLikeTom]

The best ones are the free ones, thanks for watching as always Tom 👍

[@colintownsend5024]

👍👍👏

[@PlumbLikeTom]

Thanks for the support as always Colin 👍

[@brianmayne6513]

Grand job Tom. Do you prefer oil or gas?

[@PlumbLikeTom]

I find oil boilers easier to work on, there's more common parts, thanks for watching as always Brian

[@andymav3023]

Nice video mate
Can I ask when bleeding oil at the pump do you run the boiler and allow oil to steadily flow out to help remove air 👍

[@PlumbLikeTom]

you do have to be careful doing it like that but sometimes it is needed, never take the bleed point out all the way, the pump creates 10 bar plus pressure so when it hits oil you can never stop it, thanks for watching Andy

[@SuperWayneyb]

🤘😎🤘

[@PlumbLikeTom]

Thanks for the support as always Wayne, have a great weekend 👍

[@mgbroadsterJ]

Where does the grey flesh go and don't these boilers have fire valves a more?

[@PlumbLikeTom]

I didn't show the fitting of the fire valve on this video but I filmed it on the first part, I will post a link in the description

[@mgbroadsterJ]

Don't you use Stag anymore ? We used it in the 80s .

[@PlumbLikeTom]

I've never used that, heldtite for me on oil, thanks for watching

[@mgbroadsterJ]

Does the boiler have to be on a non con unstable base ?

[@PlumbLikeTom]

Not on these, the bases don't get hot