Making the KING of All Knurling Tools (Part 1) || INHERITANCE MACHINING
Вставка
- Опубліковано 3 тра 2024
- Welcome back to my manual machine shop. In this video series I’ll be making a much improved knurling tool from my current bump knurler setup. Rather than engineer this one from scratch I’m starting with the sensitive knurling tool kit from Hemingway Kits (not sponsored). The kit is based on the somewhat renowned vintage “Marlco” design and has a lot of advantages and nice features. This first video will focus on the arm assembly and I’ll be making heavy use of the mill and the rotary table. And of course a fair bit of lathe work with some unique setups will be needed as well so you know I’m excited for that!
#inheritancemachining #machineshop #hobbymachinist
Knurling Kit (unaffiliated)- www.hemingwaykits.com/HK1115
Patreon (Drawings) - / inheritancemachining
Instagram - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
And a special thanks to my "Micrometer" patrons!
Frank Bartling, Voltser, Will Lindberg, Joe, Paul Sullivan, Ruben Urquiza, Jonathan Knoll, Madeline, duane mihlader, Patrick King, Donald, Abbas Ali, john, westley hill, Shawn Rabideau, Bill Chowanec, Pat Bourns, Alan Schabelski, Wardo, Greggory Rothmeier, Rowdy speaks, Eduardo Zarinana, Travis Trzecinski, Trevor Flowers, Austin Lippert, Michael Taylor, Jon Morgan, stevan, Robert Alexander Devennie, John Lillig, Tristan Swanson, Eli T, Joshua Noxon, finn foley, brayden, Jiří Kresan, OttoTheDoggo, Ralph Marshall, Benjamin Limmer, John Justice, Tom Paccioretti, Trevor Massetti, Pierce Heronemus, ZommBoyy69, Justin Schmidt, Parker Schuster, Cyrus Kofroth, owen, Jacob Wiertsema, Keaton, Daniel Nelson, Valodon lol, Patttto, Dalton Smithey, Paul Virdone, Yannick Gürtler, Tanner Trachsel, Robert Cimba, John Peyton Gavin, sebastian steigerwald, Joseph Driemeyer, Flick Freaks, Philip, August, Niels Ravnsborg, Warren W. Woody, Jeffrey Spoor, Domenic Bucceri, Droth, alan ruth, jack walker, Johnny LeMaster, Sri Ram Neravati, Dan Strittmatter, Noel Felix, Tyrese, Darrin Stampe, Aaron Bryant, Russell Brantley, Nathaniel Smith, Martin Jensen, Michael Bender, eric phillips, J.N.Alleman, Joseph Garcia, Travis Wolfe, Mr R, Steptimus Heap, Connor Hughes, Nils Wagenhals, Lul, Stefan Rohner, Eric Robarge, Drokles21, Jack Champion, Samppa Turunen, Cory Forrester, Dylan Roland, Blake Foley, mike kruzan, Troy Chappell, Dakota J, Jason Copland, Zac gougeon, Joshua Chambers, Martin Pittams, Jolly_Torch, Tim, Gabe Becker, Justin Gabrielson, Steven Bierlink, David Rahn, Dennis Ray, Sebastian Wridt, James York, John Thomas, Bobby Perkins, Kyle Wellman, Wayne Dorman, Benj King, Gary Bergin, aaron freeman, Marc B, Dave, Zane Alami, Kyle Brown, Nic Vulcano, Arjaan Martini, Aiden, cameron bell, Greg Eppy, Justin Jensen, Lucas, Unknown, Merik Karman, ryker321, GrimmSaber7619, AC Machining & Engineering, Giannis65, Fred Townroe, danny crawford, Graham Poole, Jeffrey Blodgett, Francisco Peebles, Infinite Craftsman, Jason Seydel, Saikho, EAPOL M3, Eddie SpaceMonkey, Mitch Stilborn, Nicolas Brouse, Matt Mansfield, Collin Danaher, Amelia Meyer, Anthony M, mark petovic, Gmoney Official, Wes, Jack Fountain, Squall, Jarrett, Ethan Vance, Ivan Sehlin, Doug Craig, Reuben, Caleb Butterfield, neal richard, Conner Bean, Adam Knowles, Saul Cervantes, Bruce Lindley, Erik D. Radzius, Clark Schaefer, Zachary Clark, Matthew Vaerewyck, Topher Caouette, Erik Conner, Nevin Spoljaric, Robert Brown, David W, Noah Rowe, Michael P Andersen, Wesley Tullos, Karam Arnaout, Patrick Kennedy, Max, Sandra Carroll, Laz A, Philip Zielinski, ???, lollimewire nineteeneleven, Toon Akkermans, James, Noah, MICHAEL GOSS, Brennan McNickle, Jim Anderson, Grant Fenske, Caleb Thompson, Stephen Maus, Samuel Gable, Ralph McCoy, Ethan Blankenship, Chris Williams, Matthew Kosmoski, Terence Kersey, Charles L Popple, Michael Timms, Jose Rodriguez, Jim Hinze,
TIMESTAMPS
0:00 Intro
1:39 What it Is
2:38 Warming Up
5:29 Piece of Cake
7:42 Something Harder
9:24 Arms - A New Tool
12:32 Arms - The Drill Chuck Strikes Back
13:44 Arms - Return of the Slit Saw
14:51 On Pins and... Bushes?
16:06 A Bit Eccentric
17:58 Children Will Play
19:09 Setup is Everything
21:24 Wrap-up
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Making the KING of All...
© 2023 Inheritance Machining, LLC. All Rights Reserved. - Наука та технологія
Watching for the second time to feed the youtube algorhythm ;) Absolute joy to watch, and I'll definitely be referencing it when I finally decide to make one for myself.
Glad I could contribute to the content, can't wait for the next part. :)
You're the man! Thanks again Erik!
Thanks man because of you we got a new video alot sooner 😊
Thanks Eric for providing the kit so we could all enjoy this lovely build come together. 👍👍😎👍👍
Absolute pleasure lads! Like I said, I’m a strong believer of supporting creators.
With that said, Brandon is the hero here. If you have the means, I strongly suggest signing up to his Patreon if you haven’t already 😉 if nothing else, you get to view this content early, which is a gift in and of itself
Great job helping out with the kit.
wake up babe, new inheritance machining video dropped
🤣🤣🤣 for real!
That's what I was saying!🤣
Tried that. She wasn't happy. 😔
Haha me too😂😂
Risky move there 😆
I just wanted to give a special thanks again to Patreon member Erik R. for spotting my troubles and sending along the kit. It's because of support like his, and everyone else's, that make these videos and projects possible. I couldn't be more grateful!
Tune in again on January 20th for the completion of this build as well as some testing!
You got a little typo there buddy, wonderful video tho, I thoroughly enjoy every single one and appreciate the effort you put into them
Beautiful machining work. I’d love you to make a fractal vice for one of your future projects!
@@TheMilfMoncher Good catch. Thanks!
@@andrew1040Thanks! I'm intrigued to make one but don't know if I would ever use it haha
@@InheritanceMachining I understand, hopefully you’ll find a use for it at some point. All the best my friend, stay safe
You're nearing 200k subscribers in less than a year of making videos. That's unheard of, and it speaks to the quality of content you're putting out. Always good, well polished stuff.
It's absolutely nuts.... thank you so much
Only channel with decent content that I can think of that's grown faster than this is "Stuff Made Here" - which, funnily enough, is another competent person making well-produced videos about interesting projects.
I think this kinda proves the formula for UA-cam.
Make high quality well edited videos, don't waste the viewer's time, and you'll grow very quickly.
That four jaw workaround was a thing of beauty.
And the jaws are all still clamping on perpendicular surfaces, negating the weird forces that can upset smaller diameters when held offset! *chefs kiss
It's weird for sure but I just love sitting here for 20 minutes, listening to this man speak of machining and complex processes, and seeing how each thing is done.
Not weird. Better than anything on TV, that's for sure, and better than 99% of the stuff on YT.
@@larrybud Couldn't have said it better
the box of shame induced a slight chuckle as well as a feeling of familiarity
Hello,
My name is Ray, I have been a production machinist for 20 yr.
I went to a trade school in Meadville Pa.
I love your channel.
I’ve been binge watching your videos for a while.
Can’t get enough!
Coming back to watch the corner rounds after you made the rounding fixture table makes me really appreciate how much that project became a staple of your videos
Really wonderful video as always, can't wait for Part 2. Keep up the great work!
Thanks!
I'm a simple man, I see a new Inheritance Machining video, I press like.
I think of myself as a hobbyist, then I watch your videos and it leaves me feeling like I'm a child playing in my dad's workshop.
If I'm being honest that's how I feel most of the time 😂 Thank you though
It takes a strong man to not only have a box of shame but also put it on display for the world to see!
Brilliant video as always - bravo!
Thank you 🙏
I was blessed with such a video today! Thank you so much! I love your videos! I am so proud of you and your search for perfection and hands on approach with real sketching and drawing. I hate seeing people just using CNC-Everything.
I wish you a wonderful 2023!
Greetings from Germany!
Thank you so much!
The idea that you make something so well that you could pass it down for generations.
Only just started the video, but just want to say - that card version of the tool for the quick demonstration of why it's better was really good! I've seen a lot of people make these kits recently, and just that demonstation made this really clear to me what the advantage was. Nice job, as ever.
I appreciate that! Thank you
Clough 42 is also working on this kit right now. Very cool to se how the two of you approach it differently!
Also, I'm getting used to ending my work week / starting my weekend with an IM video! I'm hoping that this friday thing is going to last :)
I saw! I've been holding out to watch it until I'm finished. I want to see how he does it differently. Also thank you so much for the support. I'm doing my best to keep this biweekly schedule!
I come from a family of engineers and my grandpa is an amazing mechanics. Seeing you using all this inherited tool works is really inspiring for me. We have a small workshop in the basement, but your journey and your story inspired me to double down on our small business to one day buy a proper workshop and fill it with all tools so that my children, my cousins and the generations after can always get a place to make something.
Having a machining space within that workshop is now part of the end goal.
Thank you for all that passion and joy and have a GREAT 2023!
That's amazing! I love to hear that. Thank you so much and good luck to you. And Happy New Year!
Makes my heart happy to hear people still care for their families. So many only care about themselves anymore.
@@larrypostma2866 Thank you Larry!
As a college teacher in electrical engineering, I am awestruck and sad that so many young adults never held a screwdriver in their hand (literally) or even had the chance to learn how to nail something with a hammer.
I steadily try to do good and finding ways to inspire families and kids around me. It is so important for our future.
@@simonmarcoux5879 I know what you mean. Even if they never decide to use the information my kids were all taught how to get dirty and finish the job. Any of their friends that wanted to learn were taught as much as they wanted to absorb. There’s still a load of hard workers out there but they are the exception sadly.
I have a "scrap bin of shame" that I lob parts into. Once again though, excellent work! I love the use of the sacrificial aluminum fixture plate. Also worth noting, I'm really digging the production quality of your videos. Crisp images, and a great audio recording. A joy to watch.
😆 I'll get there eventually I'm sure. I appreciate your kind words. Thank you!
@Clough42 is making the exact item.
Nice to see the different ways you have both used to make it. 👍
the "done goofed" count 100% needs the stick around because its f'n hilarious.
This build is a lot more challenging than I had expected.
You're telling me 😆
Always always always do layout on your parts. I have never regretted bluing up and scribing a part. I have regretted not.
Its always such a pleasure to watch you work. You really had me in fear and anticipation when you were hinting towards more failed parts but also made me feel better about making mistakes in the first place. I'm grateful to be able to see that even experts such as yourself can make mistakes, it really makes me feel better about making them myself. Many thanks for the awesome video as always, I cannot wait to see the rest
Thank you as always, Charl. You are very kind. I'm happy to share all the ups and downs. But I wouldn't even come close to closing myself an expert!
@@InheritanceMachining I close myself an expert at calling out close calls.
I think I remember Adam Savage going over this same Hemingway Kit clamp knurler recently, it is an awesome piece of equipment.
They are the best kits on this. You've basically 3 major options. Start from scratch, buy an old one, or buy this kit and season to taste. IMO, buying the kit is the best option. If you start from scratch, you're going to have to use a lot of tasty chunks for this, and that's a shame when the kit (or the old ones) exist. And buying an old one comes with potential baggage (worn parts incompatibility issues).
wasn't adam savage but Clough42
@@arminrichard1836 I found it, he was building storage for it. ua-cam.com/video/u23RoUDHvgI/v-deo.html
Yup! If I recall Adam reverse engineered his own with some other features included and slightly larger. Clough42 just recently did the build as I am from a kit.
Looking at the whole piece it looks alot but how they just go together is satisfying. Loving the work, cant wait for the second part!
It's super satisfying to fiddle with! Thanks!
Last week I found your channel, the day after I bench ALL videos, today I was gifted another video!! IDK if other people get relax watching the videos as I do, thanks Brandon!
That's some commitment! Thank you!
from a fellow engineer. this is an exquisite display of precise maths.
Still loving all the content here, it's so relaxing to watch but also keeps me on edge every time you're doing another operation on an already complex part!
You're not the only one on edge in those moments 😂 Thanks!
You may be interested in a tool another machinist on youtube made; Blondihacks made a corner rounding fixture for her rotary table that's reusable for projects like this. It's basically a morse taper mandrel that sits in the rotary table and accepts pins of different sizes like the one you machined out of aluminum. They have a little shoulder that raises the part above the rotary table so you can stick parallels under there. Makes setting up corner radiuses and dogbones much easier than milling a new fixture plate every time. The drawings are on her patreon but the video is in-depth enough that you could probably draft your own design on the concept, it's pretty simple.
I think I recall seeing that as well. Might be worth investing some actual time in a setup like that so I'm not constantly making new pins and whatnot. Thanks!
I was literally going to suggest the exact same thing.
Well, wouldn't that be that a nice idea for a side project? ;-)
I simply love your narrating and I have learned so much about milling! I could never figure out how these things were made
I really like the locating pin for the rotary table, that worked so well.
Nothing like living vicariously through an amazing machinist to enjoy some satisfying chips! Great video as always!
😁 Thank you!
This seems like a video that rather than having an abundance of side projects, is more dangerous at inducing side projects in the audience. I always think about knurling this or that thing that I make, and often avoid doing so because of the annoyances of the tool I have, similar to what you started with.
I've definitely had reservations at times when using my old knurler. I'm looking forward to trying this thing out
Same here, I cringe at the side load its putting on my headstock!
Very satisfying. Wanted to see it knurl. I could watch a good machinist all day.
Clough 42 is also making the exact same tool Its interesting seeing how you both do it
Yeayyy... a new episode just when I binge watched all episodes. The machining and drawing content is really interesting.
I think I could be listening to you reading a phonebook.
which came first, the knurling tool or the knurling wheels?
I love knurling. It makes everything look and feel more precise and expensive.
I love the way you use foreshadowing before the box of shame comes out. And thank you for the proper closed captions! Stay warm!
Happy Knurl Year Brandon!! ;-P Most excellent order of ops and especially all the great fixturing/setups you did...mistakes or not beautiful work. Looks like a solid, substantial and quality build! I'm looking forward to seeing how this works after writing a dissertation on knurling a few years back because of all the variables involved in getting a good Knurl...consistently. Then building a spreadsheet to work with all the wheels I have and any starting material diameter. Twas a big learning curve for me but have thought several times about building a rack and pinion type. ~¿@ Love most of the Hemingway kits but never built any. Kudo's to Erik for passing one on to you!! Thank You! Always a treat in all you produce for us!!
Happy New Year, PJ! There is definitely a ton of "mystery" in knurling and I'm hoping to at least eliminate some of those variables myself with this build. I'm not familiar with the rack and pinion type you mention though? Thanks as always!
@@InheritanceMachining I've tried searching again for 45min but couldn't find one, other than a patent from 59' for a different style. I've replied twice with some links but they don't stick @¿@...
I've been machining my whole life. And all I can say is people who are getting into this trade. There's a lot of experience being explained in these videos so I would pay attention.
I see that you're missing a completely bent drill in your box of shame.
I really appreciate that. Thank you.
Also, *yet
I just finished my Hemmingway knurler a few weeks ago. It was *such* a fun project, and is way beefier than it should be. This thing will be used by my great grandkids.
That's a good thing! 😁
Unfortunately it seems that we lost This old Tony but thankfully we got your channel.
Keep up the good work. Your ancestors should be proud.
He'll come back around (I hope). But thank you very much!
1st BABY
xd
Two days late.
I took a few years of vocational school for metal working/machining. I always loved using the lathe and mill, also enjoyed welding. I sometimes fantasize about buying a small lathe and maybe a mill sometime and start making things again.
When I was at school we had a drawer of shame, but it was full of tools people crashed. My favorite was a 2" spade drill that someone hit the chuck jaws of a Haas lathe with.
love this !
THANK YOU for sharing it with us.
Bry
This is one of those few channels that you can give it a thumbs up before you even get 15 seconds into the video and it's one of those videos you never skip even a moment thank you for the content.
That is very kind! Thank you
You couldn’t buy better quality than this accessory. What a brilliant tool. Thanks for sharing this build. Looking forward to your next project.
In the mid-'80s I used to work in the design office for WDS Marlco (formerly W. H. Marley & Co. Ltd.) who were the designers and manufacturers of these in Watford, UK. The company was predominantly known as a broach manufacturer, for which in certain fields they were unsurpassed in the UK, and had a small range of general engineering tools such as this. During my time there, I saw several toolmakers retire from the company who had started there as apprentices! Happy days, and they're still going in a slightly different guise.
Watching you make this knurling tool was educational & satisfying... plus, it made me dang glad I bought a medium priced scissor-type knurler & made a few mods to improve it.
Otherwise, my Box o' Shame would have been foot locker sized!
Thanks...
very cool, l've enjoyed every one of your videos, long may they continue.
your grandfather would be VERY proud.
Thank you so much 🙏
im training to be a CNC machinist right now, thinking of the future gets scary but watching your work makes me want to do this for a living regardless
As always another amazing video and more inspiration. The short time your channel has been around and the quickly growing subscribers speaks volumes for the quality content you provide. I also have to say as a machinist it’s inspiring and humbling that you show your mistakes and keep them in a repurposed box instead of turning them into chips. Thank you for sharing and doing what you do.
Thank you as always, Aaron. I've got a lot of learning to do so might as well share all the wins and looses along the way and hopefully others pick up from them as well.
What a video! Beginning with that paper cut-out version of the tool, the various unusual and intelligent ways you machined the parts and finally the beauty of the actual part (if not completely finished). Thanks for all of this delightful content. Looking forward to Part 2.
😁 Thanks Bruce!
I wish we had these in school, we put the knurling tool the part, zeroed the parementers, pressed untill we saw minimal knurling, zeroed again and then we pressed as dees as we wanted the knurling. This only worked for smaller parts with a center, longer parts would bend as you showed, so this tool you made looks awesome
It just amazes me the number of tiny steps it takes sometimes to make these individual pieces. Well done.
I was definitely in for more than I expected with this one. Thanks!
the very first consideration in my shop build was giving every outlet its own complete circuit and breaker. yes it was pricey, but worth it.
Your videos are so soothing to watch... Its like having a calm subscription
😁 Thank you
Any day is the best day when a new one of this channels video's drop. Primarily a wood worker myself I still learn so much by watching machinists work. And I love that you show all the side projects and mistake you make along the way. It's an invaluable tool for learning. Seeing not only how you go about your solutions, but also the iterations of getting to the "right" or at least "good enough" way. Thanks again.
My pleasure. Thank you very much!
Your machining style is awesome sir. I could watch you for hours. I love the mishap box amd that you show it. Very awesome sir. Keep up the great work.
Thank you!
Awesome! I have never liked the push knurlers, for the same reasons you mentioned.
Now, that's what i'm talking about. That's a knurling tool. Noice!
😎
I just managed to finish binging all your videos last night, and now another? Great way to start the day
I read this quote some time ago that really rings true. I'm assuming the quote was an answer to a question about why the person owns a lathe, and milling machine. The quote reads: "I own the lathe and milling machine to make parts, tools, and accessories for the lathe and milling machine". Great video once again. Happy Friday!
That should be framed and hung on a wall. Thanks!
Brandon, thank you for another great episode of machining. A small tip from my side; if you clamp two "identical"parts together in one vice or chuck just add a piece of plain paper. It will for correct the small differences in the parts and the bowing under pressure of the clamping device (chuck/vice etc.) and can make a difference in to be safe or sorry. Drilling is not that critical because the main force is downwards. But by using paper as a shim (in a decent vice or chuck) you can also mill identical features without moving one of the parts. God and the devil are both in the details...
Thank you! Best, Job
Ooo the paper idea is great. I let it slide just because it was drilling only but the paper is a great tip. Thanks!
This is one of the only yt channels that when I see a new video, I drop everything and watch. Awesome job as always, I love seeing that the mistakes are left in as well as how you solved the problem, as others have said it really speaks to the level of thought and detail that goes into these amazing projects
I really appreciate you saying that. Thank you!
So cool! I have never seen a knurler like this. Wow, so glad I watch you to see such wonderful machines
Thanks!
I work with light and work work is so inspiring and your passion is felt through the screen. Thank you
Thank you 🙏
Love the old school drafting table!
I also experience tripping the breaker on the air compressor in the winter. I've thought about moving it somewhere warmer or ducting in the furnace. I hope you never need a bigger box of shame. Though, in the spirit of learning, rename the box 'box of experience gained'.
I stumbled upon this channel a few months ago, so glad I did!
A little factory edge never hurt anything lol . I actually like the contrast of machined surfaces and factory edges on the same part . Assuming they don’t affect functionality of course. Nice job
Thanks!
You and Clough42 should do a series together. I learned about your channel from his a couple weeks ago. Awesome work.
hmm... that could be interesting. Thanks!
The parts look amazing! Very professional!
very relaxing whenever watching your video
Man, you have found the perfect format in machining videos on YT! Content, length, cutting, voice-over, angles, script, and last but not least quality of the work done. I can guess where you draw the inspiration from but still you found your own style. You should hit 1M in record time!
I really appreciate that! Thank you so much
I love your honesty, it is very refreshing to see your "happy accidents" and your "done goofed's", keep it up man and if I am ever fortunate enough to make it across the pond, I'd love to take you out for a pint and talk shop!
I really appreciate it!
What a great series, thank you! So satisfying to see nice tight parts slide together, well done!
Thank you!
It is extremely satisfying to have found such a young channel with such excellent content. It is clear that your video production is as meticulous and precise as your machining! In my experience, machinists tend to be the most intuitively intelligent and capable people. It seems that you are no exception. I'm looking forward to much more to come
That is very kind of you to say. Thank you!
I made the same tool a few months ago! Its nice to see you and Clough42 have the same kits and video documenting it all. I like seeing how others approach the same problems and come up with different ideas to solve them!
All the best
Gaz
Thanks! That's actually the reason I haven't watched Clough42's video yet. I want to see how we did it differently when finished
@@InheritanceMachininghe even gives you a shoutout 😂
@@DarwinHermaaz 😮
I stumbled on the channel early last year with a few hundred subscribers. Absolutely my favourite UA-cam channel - I thought nobody could ever overtake my mechanics channel but you’ve done it!!!
You are very kind! Thanks for following along this whole time
Your videos are always so educational and relaxing to watch. Thank you and your grandfather.
Thank you very much 🙏
Absolute piece of art.
Great video. I made this same knurling tool some time ago in a 8 part series going into great details of the operations. It turned out fantastic. Thanks for sharing.
Steve.
Ah very cool. This seems like a popular design. Thanks!
These were advertised a lot in the Model Engineer in the 1950s. I managed to buy an original one from ebay they are brilliant well worth having.
When i first saw your video of you machining the pen a few weeks ago I was immediatly hooked. Have been enjoying watching your videos alot recently, pure machining goodness. Look forward to future content and the road to 200k!
Thank you so much!
This channel takes the gold for fastest to get me hooked. You have an excellent voice and outstanding production skills. Well done. I am constantly waiting for your videos. Thank you!!
Thank you so much!
Hello from New Zealand , great video again so good to watch & learn something new again, thanks for sharing
My pleasure! Thanks
Beautiful work, and along with that I really appreciate that you also include the "Box of Shame" parts that all of us make once in a while! Good on ya!
Just keeping it real. Thanks a lot!
Fascinatingly beautiful.
Fantastic work, videography, and narration! most enjoyable
Thank you!
Thanks for the high quality videos, when you upload something new, you make my day.
I appreciate you saying that. Thanks!
I've never seen such type of knurling tool. Looking forward to see it in action. No matter how big the Box of Shame is, failure is part of the way to make things right. As always you did a great job, keep going.
Very true. Thanks as always!
I’ve come to the realization, thanks to you and this old tony, that hobby machining is a never ending cycle of machining tools to make the stuff you actually want to make 😅
And that stuff you actually want to make is usually more tools 😂
Another great video, Brandon! To see you figure out how to make tangent radii on a manual mill was really neat. It's hard enough to get those to form nicely with a CNC, so you should be very proud of the finished result.
Thank you for sharing this project with us! I'm excited to see it finished and put to use in future videos.
Apparently it just takes a lot of trial and error 😂 Thanks as always, Jay!
@@InheritanceMachining Sounds just like CNC programming... Haha! You're welcome!
Friday evening, a cool drink and Inheritance. All right.
Love it, can't wait to get some projects like these going on in my shop.
Thanks! These Hemingway kits are great for just hitting the ground running.
Hope all the boys are doing well. It’s cool shit like this that keeps us alive.