How to change cylinder on a scooter

How to change cylinder on a scooter (vivacity speedfight)

[@j.w_torgersen2866]

this 12 year old video taught me more than any of the new videos around

[@mikedrillz2866]

Always use a torque wrench when tightening down a cylinder head,otherwise you will get a blown headgasket eventually.

[@14ishmeal]

Great vid now am confidend to install my big bore kit wasent sure about removing the exhaust studs so just ordered new ones abit easier

[@ArtisBMX]

dudes, your videos are the most amazing thing in this plannet (well what i wanna say here they are pretty damn good). keep it up! respect

[@TheHeavenlymetal]

thank you so much for the great video, i am about to install a new cylinder on my PGO dr big ;)

[@LT-hh3dy]

Very good video👍

[@5DaWiD5]

Don't forget to install new cylinder head bolts, each time when you take off cylinder head.

[@Team_Nico_Motorsport]

5DaWiD5 no

[@turkn7786]

5DaWiD5 no

[@siTTinLo]

5DaWiD5 no

[@espenberg8773]

5DaWiD5 no

[@Travailleradomicile777]

Thank you so much for taking the time to reply :-) I will not be looking for more speed but just a bit more power. One guy from a shop told me that upgrading from 50cc to 70cc will bring the fuel consumption down, do you agree with this or it is just a lot of rubbish to get a sale? Thanks

[@HasSse666]

The Song is Umbrella with Lillasyster

[@ChadTheLad]

The music ruined this!

[@pagas5002]

its a cover the song is from rihana

[@rambon1234]

Tack ! Tänkte på detta med, min farsa hjälpte mig göra en ska som jag kunde sätta på kolven och skruva in en m12 bult och bara pressa ut kolvbulten, även att vevaxeln inte blev skadad, !

[@thegoldenapple52]

Will this work on 4t scooters?

[@mbahmannz]

please more English version :-) great videos

[@rasse995]

Hey hasse, jag undrar om du vet vilket tändstift jag ska köpa till min vivacity, ska köpa 50cc sport och behöver nytt tändstift. vilket rekommenderar du?

[@80Loke]

Bra guide man ska inte glömma att varva försiktigt dom första milen :)

[@NorbertKarman]

Sorry, but with my bad english i dont understand, why muss protect with wand and with cloth. If something falling down inside motor, or it has some other significance?

[@moderatorheller3171]

thinking about buying this project speedfighter 2 with a missing cylinder as my first ever bike and first ever project it looks really cheap and quite easy

[@mrstonedrasta1]

du är typ den nya diospeeddemon :)
du e as bra måste jag bara säga !

[@jussi798]

Remember to use some Kind of sealant glue to avoid leaks more effectively.

[@DjSLUMiX2000]

BARDZO DOBRY PORADNIK 10/10 :)

[@kyne96]

with a 70 bore kit do i need to change the head because it doen't come with the kit its just the cylinder? thanks

[@brianfrazier6147]

do you need a torque wrench to remove and install a head gasket

[@asphaltcowboy7868]

It's called a wrist pin, not piston pin..lol..and for the arrow on the piston, faces the carburetor...I mention this because reversing the jug has become more popular these days...so facing the arrow forward doesn't always work for all applications... two strokes were originally designed with the exhaust exiting the front and the carburetor intake in the rear because they wanted the heat of the exhaust out of the way and not up under your ass...so the typical two stroke engines were designed backwards...

[@howtodothiseasy]

I have a speedfight 3 ac 50cc its a horizontal engine, will i have ti drop the engine out or just make do by lieing down? thanks

[@Travailleradomicile777]

Hi, I have an Aprilia rally 50cc and would like to upgrade it to 70cc, only the piston and cylinder has to be replaced or do you need a new carburetor and other pieces? Also on a scooter, is there a squish clearance? Thanks for your help

[@eminemdakingbru2]

Very good video but please help. I changed my head but i had to remove the engine first because of the position it is in. So i had to take all the tubes out of my carb. Now it will not start and i put it all back together. No petrol was flowing through the line and i dont know why. I have a fuel pump

[@MrSeemorebuds]

Great song!

[@rambon1234]

Blir te o göra det, men hur mcyket kostar det på ett ungefär om man ska byta det och sen sätta på allt? Dvs cyllen packningar osv? alltså på en verkstad eller är du billigare? ;)

[@tyrmomos1683]

Vart kan man hitta den sprayburk med 2 taktsolja som du använder

[@rambon1234]

Hey, jag har en boatian som har värmenypt, jag har fått av cyllen etc men kolven.. den är förstörd och den har liksom böjt kolv pinnen inte vevaxeln utan den som går igenom kolven, hur får man ut detta?

[@jimgunzel]

no, you have diferent cylinders for all engines, piaggio minerali etc... and then you have cyilinders made for air cooled bikes and liquid cooled.

[@antirealm]

lol didnt notice that, haha. I enjoyed seeing the annotation. Nice ;)

[@alexmarshal1114]

I have Peugeot Speedake 50cc (its air cooled) can i go to 70cc with the same PROCEDURE you have done?

[@pembo2]

Hi, since this is a speedfight l/vivacity 50cc, I take it it’s the same process for the 100cc speedfight?

[@14ishmeal]

What size spanner did you use to remove the nuts on the exhaust

[@SomebodyIUseToBe]

Thank you for your answer :)

[@Insanecoment]

Im from Norway and i have a Yamaha Bws... It comes loud sounds from it when i start it with the kicker (There is no EL-Start). The eksos gasket was old and it fell off often, and i have change it not long ago, and i just checked if the new gasket wasnt propper placed, but its fine... I dont know why there are loud sounds.. Any one have a tip? I need help... I not an moped expert :) Its nothing wrong with the eksos gasket...

[@FRUElimLDRvideos]

how to align piston rings is there a certain way this must be done

[@joelkenndal8552]

+HasSse666 hur kör man in en cylinder. hur långt ska man köra?
tacksam för svar

[@marekgundelach7197]

Bottom gasket?

[@olawalemuyiwa4173]

How can I get a new block engine

[@TheMalthi1]

Does all cylinders fit all scooters?

[@Travailleradomicile777]

I see......I did not know that a bigger piston could use less petrol when the motor runs at the same speed as the small piston..cool:-) No idea if you are familiar with 1999 rally lc 50cc, but which 70cc cylinder/piston brand would you recommend plz/

[@mikestvvlog8711]

nice

[@woutertje026]

Could you make also a video for Liquid cooled engine?

[@oiudsaf]

Its simple basically the same but with liquid everywere

[@max-zs8qq]

@@oiudsaf 🤣🤣 sure mate

[@MetalxKim]

can A hot50 drive good with A 70cc? :-)

[@rambon1234]

Med vad? Har provat allt !

[@Davyboi1690]

can someone find me a 70cc cylinder as my one broke long story but don't want to by the fill kit again thanks

[@thedrivaevo]

Does your scooter run perfectly after the cylinder change

[@TheRickeMovies]

Gör man likadant med 4tak Baotian?

[@Elio866]

Bellissimo
Thanks

[@CoolMrMusicGuy]

thank you for the amazing video, it was very helpfull!!!

[@Travailleradomicile777]

thanks:-)

[@YeCannyDaeThat]

Thanks for this mate, Any idea what torque I should be titening the head bolts down to? And would you recommend a bit of locktite thread lock on the bolts. Thanks.

[@HasSse666]

YeCannyDaeThat Sparkplug - 20-25 Nm
Cylinderhead (M7 x 1) - 14 - 16 Nm
It´s not necessary to use Loctite but i wont do any harm either..

[@Style.23]

Carburador 17,5?

[@DanielHondaCRX]

waar kan je nieuwe circlipjes halen?

[@chambliziOfficialChannel]

SO MUCH BETTER THEN REHANA!

[@groxfire]

Tjena jag tog bort cylindern utan och göra rent ( tänkte inte på att det kan komma sköt i vevhuset xD) vad tycker du jag borde göra? Tacksam för svar :)

[@antirealm]

Base gasket?

[@alexmarshal1114]

When you changing the cylinder and piston do you have to know anythink about timing or anythink else?

[@thijsiphone]

No timing is only inportant with 4stroke engines.

[@visi0n4ry]

finns det något annat sätt att få ut skriven vid 1:50?för min har nämligen gått av så den är inte alls lika lång! :(

[@JonathanNurmi]

@HasSse666 Passar denna cylinder på en Solifer-Suzuki PV? :)

[@rambon1234]

Har knappt pengar te kolven haha, kostar 340kr för frakt osv, så har kvar den gamla eftersom den fortfarande funkar, har beställt en nu så den borde vara här om .. 2-3 dagar !

[@siTTinLo]

Torque specs maybe???

[@rasse995]

just nu köra jag en viva, 30 moppe med leovince tt lågvarvigt rör storlek 82 munstycke malossi sportluftfilter i originalboxen och jag kan inte köpa 70cc pga mina föräldrar men 50cc är helt okej för dom

[@chrilla1980]

Hojta gärna till om du behöver översättningshjälp då jag vet att google inte alltid översätter allt rätt tyvärr ;)

[@SomebodyIUseToBe]

With what have you lubricated, sprayed the piston?

[@ludvighedenstrom2781]

5-56

[@renepeeters8432]

waar is je voetpakking bij de montage???

[@johnr4551]

4:40 - Is that Leo singing?!

[@danielclassics12686]

cool :-)

[@rambon1234]

kan inte du göra en video om hur man tar bort cyllen på en boatian?

[@kyne96]

cheers

[@Somlow]

är det vanlig 5-56 du använder när du smörjer in kolven ? :o

[@sebastianmeister6184]

danke war sehr hilfs reich

[@etterbakk]

i did it exactly like this. but the engine doesnt make revs and there is no power.
do you think i broke a ring?

[@mrstetmen]

I have the same problem any idea how to fix that??

[@nzj3vx]

EtterBakk upjet

[@etterbakk]

It was indeed the carb settings and i had a fuel supply problem.

[@nzj3vx]

i'm actually having the same issue. it starts but wont rev high. i have upet the jet and lowered the jet. it wont run just has no power. what sort of jet size did you have to go too and what did you start with

[@nzj3vx]

Stet Stetmen what was your fuel supply problem

[@felixfauske6157]

fort an går no da

[@rambon1234]

Okey! Tänker dock inte pröjsa ut 499 spänn för en sak man använder en gång..

[@wheresfuninthat]

Remove top? Call things with their names, thats a cylinder head.

[@morsaNonTwitch]

J0keR_ in Swedish, it's "topplock" or "topp", so I guess he just translate the word "topp".

[@Johnny-lb2li]

very good but what is the name of music

[@sundarkafle4773]

under my umbrella
lady gaga

[@Team_Nico_Motorsport]

sundar kafle its Rihanna

[@josepeixoto3715]

First hit the M key; second,watch video...

[@insingloffMUFC]

where is carb ?!!

[@rambon1234]

Eller.. så går du ner till Skövde? ;D

[@ddrhazy]

Lose the music, genius.

[@hafzamacie8858]

This time I will do it manually with the help of Woodglut designs.

[@zombiedeutsch]

no

[@Dr.VonBraun]

The music is distracting and it sucks.