[TESTED] XYL Unicorn Blaster Black Raisin upgrade kit
Вставка
- Опубліковано 11 лип 2024
- In this video, I test the upgrade kit for the XYL MK9 Unicorn foam dart blaster from Black Raisins. In my last video, I fully upgraded the Unicorn with this kit, along with a custom dye job and 3-D printed parts. Today, I tested this with the worker Seagull (8in), Harrier (12in), and a 9 1/2 inch Unicorn upgrade barrel with both spring options. I test with both Worker Gen 3 and Worker Gen 3 bamboo darts. All this testing was very informative and glad I went through the effort of firing hundreds of darts over the chronograph to figure out the best configurations. Hope you find this video useful.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
SUBSCRIBE HERE: / naptownnerf
[Please follow me on the platforms below]
My Instagram: / naptownnerf
My Facebook page: / naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-...
Unicorn Review: • [REVIEW] XYL KM9 Unico...
Unicorn Mod Video: • [MOD] XYL KM9 Unicorn ...
[Buy Here]
Unicorn Blaster: outofdarts.com/products/xyl-u... or blackraisins.com/collections/...
Worker darts - outofdarts.com/products/worke...
Worker bamboo darts - amzn.to/3tmsjk5
Black Raisins Unicorn Upgrade Kit: blackraisins.com/collections/...
Upgrade Barrel: (this is a longer threaded version of the one I have, which is an upgrade but 2in longer) outofdarts.com/products/xyl-u...
BCAR - blackraisins.com/collections/...
Compatible magazines - amzn.to/462LvRT
Dye - amzn.to/3RJOOsj
Blaster work mat - amzn.to/474StW2
3-D Printed Files:
Buffer tube - www.thingiverse.com/thing:616...
Top Picatinny - www.thingiverse.com/thing:617...
Threaded barrel piece - www.thingiverse.com/thing:624...
Hardware needed with 3-D printed parts:
M3 screws (for buffer tube) - amzn.to/3RqDHTR
M4 bolt (for buffer tube) - amzn.to/3RLeHaj
Brass inserts (for Piccini rail) - amzn.to/3tccyw1
Out of Darts dye mod guide - • Add some color to your...
Time codes:
0:00 - Intro and testing overview
1:20 - Testing 12-inch barrel with high-powered spring
3:50 - Worker barrel issues
4:30 - Testing 8-inch barrel with high-powered spring
6:50 - Testing 8-inch barrel with low-powered spring
9:07 - Testing 12-inch barrel with low-powered spring
11:36 - Testing 9 1/2 inch barrel with low-power spring
14:09 - Testing 9 1/2 inch barrel with high-power spring
16:00 - Black Raisin Unicorn upgrade kit review, testing discussion, and final thoughts
#nerf #nerfmod #tested - Розваги
Hey Naptown I noticed you were having issues with the barrel scraping and making the priming tough there is a 3d printed priming block that uses smooth bearings and is built for 16mm outer diameter barrels check it out!
Grateful for the testing. Thats what I’m here for
You can replace the brass bearings with the plastic bearings from the Worker Harrier priming block kit. Won't damage your barrels nearly as much.
what other threaded barrel sizes are available with this recessed priming area? seems very specific to the unicorn. I don't have access to a 3d printer or a harrier for parts
this stuff is awesome dude
You should try some airsoft springs imo, iirc they should be about the right size. Great videos. Still unsure if I want the OOD kit or the one from BR. If BR had a few more things I wanted to order I would just do that but the shipping, as you know, is a killer.
Considering BR is sueing well known community member Piggy over calling them out on shaddy business, I'd suggest getting the kit from OoD. Also during gameplay the o-rings on the BR kit tend to fall off pretty easy from the pusher.
@@thehollowlingwin - Sold! Will do the OoD kit. Thanks for the tip. =]
Instead of milling a groove in the barrel can we grind down something in the priming mechanism instead of
They actually make removable barrels for this blaster. I linked one in the description. But yes, I believe it is possible to change out the mechanism inside if you don't want the bearings to help prime.
Probably not needed but you think spacers will help some spring combos break 200 consistently?
Do the ridges on bamboo darts interfere with BCAR’s
No, bamboo darts work just fine out of a BCAR.
@@NaptownNerf danque. Btw how necessary is it to put in the metal plunger given the fragmentation issue